Comparison of two-dimensional single sheet testers for the measurements of vector hysteresis and magnetostriction characteristics

Issue title: 14th International Workshop on 1&2 Dimensional Magnetic Measurement and Testing (2016)

Guest editors: Zhiguang Cheng, Jianguo Zhu, Yongjian Li and Johannes Sievert

Article type: Research Article

Authors: Zhu, Lixun | Lim, Jeonghyeok | Koh, Chang-Seop^*

Affiliations: College of Electrical and Computer Engineering, Chungbuk National University, Chungbuk 28644, Korea

Correspondence: [*] Corresponding author: Chang-Seop Koh, Room 467, Building 46(E8-3), College of Electrical and Computer Engineering, Chungbuk National University, Chungbuk 28644, Korea. Tel.: +82 43 274 2426; Fax: +82 43 274 2426; E-mail: [email protected].

Abstract: The hysteresis properties of electrical steel sheet (ESS) is very helpful to develop new type electrical machines and improve their performance. Therefore, two-dimensional steel sheet tester (SST) is required to measure the hysteresis properties of ESS. This paper introduces a kind of square type SST, but this SST can only measure the non-oriented and grain-oriented ESS because the size of the specimen is not large enough. To measure highly grain-oriented ESS, a new round type SST which is designed to have broader region of uniform field and allows a larger specimen is proposed in this paper. Meanwhile, magnetostriction properties also can be measured by this round type SST.

Keywords: Electrical steel sheet, single sheet tester, hysteresis property, magnetostriction

DOI: 10.3233/JAE-172268

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 55, no. S1, pp. 141-146, 2017