Affiliations: [a] China Nuclear Power Technology Research Institute, Shenzhen, China | [b] State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
Correspondence:
[*]
Corresponding author: Huan He, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China. E-mail: [email protected]
Note: [†] Shuo Hou and Xing Tan contributed equally.
Abstract: Most research about using piezoelectric stacks to suppress vibration of mechanical structures didn’t involve the similarity problem for the piezoelectric stacks. The goal of this paper is to investigate the dynamic similarity between a prototype piezo stack and a scaled up or down piezo stack, whilst discussing the feasibility of predicting the vibration of prototype structure which use the piezoelectric stacks for vibration control. To illustrate this problem concisely, a single-DOF system consists of a proof mass and a piezo stack shunted with a series RL circuit is considered. Firstly, the governing equation of such piezo-electromechanical system in frequency domain is derived. Next the dynamic similarity of prototype and model stack is analyzed by similitude theory. After that the scaling laws are derived. Finally, a numerical simulation and relative error analysis are given to demonstrate the scaling laws.
