Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Tian, Tongfeia; | Nakano, Masamia
Affiliations: [a] Institute of Fluid Science, Tohoku University, Sendai, Japan
Correspondence: [*] Corresponding author: Tongfei Tian, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577, Japan. E-mail: [email protected]
Abstract: Isotropic and anisotropic silicone rubber-based magnetorheological (MR) elastomers with various concentrations of silicone oil were fabricated, and their dynamic viscoelastic properties were measured. The tested results showed that the silicone oil played an important role in the MR elastomers. The sample with a higher concentration of silicone oil had lower zero-field storage modulus and larger storage modulus increasing rate. For the MR elastomer without silicone oil, the anisotropic sample showed higher storage modulus increasing rate than its isotropic counterpart. However, for the MR elastomers with 15% weight fraction of silicone oil, the isotropic sample dominated in the storage modulus increasing rate.
Keywords: Magnetorheological (MR) elastomer, silicone rubber, silicone oil, dynamic viscoelasticity, storage modulus
DOI: 10.3233/JAE-171162
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 59, no. 1, pp. 349-355, 2019
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]