Sizing of metallic foam bubble flaws using direct current potential drop signals with the help of the neural network method

Article type: Research Article

Authors: Xie, Shejuan^a | Takagi, Toshiyuki^{a; *} | Chen, Zhenmao^b

Affiliations: [a] Institute of Fluid Science, Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai, Japan | [b] School of Aerospace, Xi'an Jiaotong University, Xi'an, China

Correspondence: [*] Corresponding author. Tel./Fax: +81 22 217 5248; E-mail: [email protected]

Abstract: To investigate the possibility of reconstructing the position and size of bubble flaws in metallic foam, a Neural Network approach is applied to predict the flaw profile from Direct Current Potential Drop (DCPD) signals. A feed-forward network, improved by Principal Component Analysis (PCA) is selected for the inverse analysis. Over 100 sets of DCPD signals due to flaws with different positions and sizes are calculated using a newly developed fast forward solver and are used for the inverse analysis. Satisfactory reconstruction results are obtained for these simulated signals.

Keywords: Sizing, bubble flaw, metallic foam, neural network, DCPD, NDT

DOI: 10.3233/TAD-2011-1372

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 36, no. 4, pp. 339-353, 2011