Research on influence of stator shapes and frames of switched reluctance motor to thermal characteristics

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part II

Article type: Research Article

Authors: Li, Jian^a | Song, Xueguan^b | Choi, Dawoon^a | Cho, Yunhyun^{a; *}

Affiliations: [a] Department of Electrical Engineering, Dong-A University, 840 Hadan 2 dong, Saha-gu, Busan, South Korea | [b] Department of Mechanical Engineering, Dong-A University, 840 Hadan 2 dong, Saha-gu, Busan, South Korea

Correspondence: [*] Corresponding author. Tel.: +82 51 200 7742; Fax: +82 51 200 7743; E-mail: [email protected]

Abstract: This paper describes a comparison of thermal characteristics of stator shapes and frames in switched reluctance motor. It has been published that stator shapes and frame shapes had a large influence on noise and vibration performance, but thermal characteristics haven't been studied. Four different stator shapes were analyzed by using transient magnetic analysis in order to calculate the losses, which were taken into thermal analysis as heat source. Three dimensional finite element thermal analyses was then carried out to study four different stators with same basic dimension, and it was found that the square shape was most heat conductive. Frames including conventional axial ribbed aluminum frame, axial ribbed iron casting frame, radial ribbed frame, no ribbed frame were modeled and analyzed. The simulation results could be used to help make a choice between different stators and frames considering both vibration behavior and thermal behavior.

Keywords: Switched reluctance motor, stator shapes, frames, electromagnetic analysis, thermal analysis

DOI: 10.3233/JAE-2010-1275

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 3-4, pp. 1469-1476, 2010