Simulation and experimental study of remote field eddy current testing on flat conductive plate

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part II

Article type: Research Article

Authors: Wang, Haitao^{a; *} | Luo, Qiufeng^a | Wang, Xin^a | Tian, Guiyun^{a; b} | Xing, Lidong^a | Wang, Ping^a | Li, Yong^b

Affiliations: [a] College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, 210016, P. R. China | [b] School of Electrical, Electronic Computer Engineering, Merz Court, University of Newcastle Upon Tyne, NE17RU Newcastle Upon Tyne, UK

Correspondence: [*] Corresponding author. Tel.: +86 2584896264; E-mail: [email protected]

Abstract: Remote-field eddy current (RFEC) inspection has shown its advantages over the other techniques in Electromagnetic non-destructive evaluation (ENDE) techniques in detection and characterization of deeper defects. In this paper, a new RFEC transducer has been designed for inspection of flat conductive plates, based on numerical simulations using finite element method. Through experimental study, it is concluded that the new transducer has the capability of detecting deep buried defects, and that the phase of RFEC signals have linear relation with the depth of the defects.

Keywords: Electromagnetic non-destructive evaluation, remote-field eddy current, flat conductive plates, finite element method

DOI: 10.3233/JAE-2010-1247

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 3-4, pp. 1261-1266, 2010