Numerical analysis of an electromagnetic nondestructive evaluation method for rotating machinery

Issue title: Selected Papers from the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2009), Part II

Article type: Research Article

Authors: Huang, Haoyu^{a; *} | Kayata, Ryo^a | Perrin, Stephane^a | Yusa, Noritaka^b | Miya, Kenzo^c

Affiliations: [a] International Institute of Universality, Tokyo, Japan | [b] Tohoku University, Sendai, Japan | [c] Hosei University, Tokyo, Japan

Correspondence: [*] Corresponding author: Haoyu Huang, International Institute of Universality, Imon Ikenohata Bldg. 7F, 2-7-17 Ikenohata, Taito-ku, Tokyo,110-0008, Japan. Tel.: +81 3 5814 5350; Fax: +81 3 3827 0682; E-mail: [email protected]

Abstract: A novel electromagnetic nondestructive evaluation (NDE) method was proposed by authors recently. Electromagnetic (EM) sensors, by directly measuring the impeller of a rotating machine, offer a powerful way to detect not only defects on the impeller itself but the state of the condition of the rotation, through the measurement of the displacement of the shaft and the impeller. In this paper, a numerical simulation method using magnetic vector potential and edge based finite element was presented. Simulation results of the EM signals showed good agreement with experimental results of a small water pump. A real canned pump with magnetic casing was considered and numerical results showed that the electromagnetic nondestructive evaluation method is possible to detect the impeller covered by magnetic casing in some instances.

Keywords: Electromagnetic nondestructive evaluation method, magnetic vector potential, edge based finite element method, rotating machinery, electromagnetic signal

DOI: 10.3233/JAE-2010-1226

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 3-4, pp. 1101-1107, 2010