Conductor loss calculation of elliptical, cylindrical coplanar waveguides and coplanar waveguides with finite conductor thickness

Article type: Research Article

Authors: Duyar, Mehmet^a | Akan, Volkan^b | Yazgan, Erdem^{c; *} | Bayrak, Mehmet^d

Affiliations: [a] Republic of Turkiye Ministry of Industry and Trade, Ankara, Turkiye | [b] TUBITAK Space Technologies Research Institute, Communication Systems Group, ODTU, TR-06531, Ankara, Turkiye | [c] Department of Electrical and Electronics Engineering, Hacettepe University, TR-06800, Beytepe, Ankara, Turkiye | [d] Department of Electrical and Electronics Engineering, Faculty of Engineering, Selçuk University, Konya, Turkiye

Correspondence: [*] Correspondent author: Prof. Dr. Erdem Yazgan, Tel.: +90 312 297 70 50; Fax: +90 312 299 21 25; E-mail: [email protected]

Abstract: In this paper, new and fast analytical formulations have been presented for conductor loss calculations of elliptical (ECPW) and cylindrical coplanar waveguide (CCPW) with finite conductor thickness. These expressions are derived using conformal mapping techniques (CMT) and the validity of them is established by comparing the numerical results in the literature. These comparisons indicate that for the same conductor thickness the conductor losses of elliptical and cylindrical coplanar waveguide are higher than the conductor losses of coplanar waveguide presented in [1]. Calculation method developed in this study is an extension of the approximate technique proposed by Ghione [1].

Keywords: Conformal mapping, elliptical coplanar waveguide, cylindrical coplanar waveguide, conductor loss, attenuation

DOI: 10.3233/JAE-2009-1013

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 29, no. 3-4, pp. 185-195, 2009