Measurement of two-dimensional vector magnetic properties on frequency dependence of electrical steel sheet

Issue title: ASAEM 2003

Article type: Research Article

Authors: Urata, Shinya^{a; *} | Shimoji, Hiroyasu^a | Todaka, Takashi^a | Enokizono, Masato^a

Affiliations: [a] Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University

Correspondence: [*] Corresponding author. E-mail: [email protected]

Abstract: This paper presents measured results of the two-dimensional vector magnetic properties in electrical steel sheets under high frequency excitation conditions. The relationship among the maximum flux density, the magnetizing direction, the exciting frequency, the axis ratio of the rotating flux density (the ratio of the maximum flux density and the minimum flux density), and the iron loss is clarified. The results obtained from the non-oriented electrical steel sheet (35A550) and for the grain-oriented electrical steel sheet (35G155) are compared in this paper.

DOI: 10.3233/JAE-2004-660

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 20, no. 3-4, pp. 155-162, 2004