Journal of Intelligent & Fuzzy Systems - Volume Pre-press, issue Pre-press

Authors: Vallabhaneni, Nagalakshmi | Prabhavathy, Panneer

Article Type: Research Article

Abstract: Numerous people are interested in learning yoga due to the increased tension levels in the modern lifestyle, and there are a variety of techniques or resources available. Yoga is practiced in yoga centers, by personal instructors, and through books, the Internet, recorded videos, etc. As the aforementioned resources may not always be available, a large number of people will opt for self-study in fast-paced lifestyles. Self-learning makes it impossible to recognize an incorrect posture. Incorrect poses will have a negative effect on the patient’s health, causing severe agony and long-term chronic issues. Computer vision (CV)-related techniques derive pose features and …conduct pose analysis using non-invasive CV methods. The application of machine learning (ML) and artificial intelligence (AI) techniques to an inter-disciplinary field like yoga becomes quite difficult. Due to its potent feature learning ability, deep learning (DL) has recently achieved an impressive level of performance in classifying yoga poses. In this paper, an artificial algae optimizer with hybrid deep learning-based yoga pose estimation (AAOHDL-YPE) model is presented. The presented AAOHDL-YPE model analyzes yoga video clips to estimate pose. Utilizing Part Confidence Map and Part Affinity Field with bipartite equivalent and parsing, OpenPose can be employed to determine the joint location. The deep belief network (DBN) model is then used for Yoga recognition. Finally, the AAO algorithm is utilized to enhance the EfficientNet model’s recognition performance. The results of a comprehensive experimentation analysis reveal that the AAOHDL-YPE technique produces superior results in comparison to existing methods. Show more

Keywords: Yoga posture, activity recognition, deep learning, metaheuristics, computer vision

DOI: 10.3233/JIFS-233583

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Sendhil, R. | Arulmurugan, A. | Jose Moses, G. | Kaviarasan, R. | Ramadoss, P.

Article Type: Research Article

Abstract: Occult peritoneal metastasis often emerges in sick persons having matured gastric cancer (GC) and is inexpertly detected with presently feasible instruments. Due to the existence of peritoneal metastasis that prevents the probability of healing crucial operation, there relies upon a discontented requirement for an initial diagnosis to accurately recognize sick persons having occult peritoneal metastasis. The proffered paradigm of this chapter identifies the initial phases of occult peritoneal metastasis in GC. The initial phase accompanies metabolomics for inspecting biomarkers. If the sick person undergoes the initial signs of occult peritoneal metastasis in GC, early detection is conducted. Yet, the physical …prognosis of this cancer cannot diagnose it, and so, automated detection of the images by dissecting the preoperational Computed Tomography (CT) images by conditional random fields accompanying Pro-DAE (Post-processing Denoising Autoencoders) and the labeling in the images is rid by denoising strainers; later, the ensued images and the segmented images experience the Graph Convolutional Networks (GCN), and the outcome feature graph information experience the enhanced categorizer (Greywold and Cuckoo Search Naïve Bayes categorizer) procedure that is employed for initial diagnosis of cancer. Diagnosis of cancer at the initial phase certainly lessens the matured phases of cancer. Hence, this medical information is gathered and treated for diagnosing the sickness. Show more

Keywords: Gastric Cancer, MIoT, Greywold and Cuckoo Search Naïve Bayes categorizer, Cuckoo-Grey Wolf search Correlative Naïve Bayes categorizer

DOI: 10.3233/JIFS-233510

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Priya, S. Baghavathi | Rani, P. Sheela | Chokkalingam, S.P. | Prathik, A. | Mohan, M. | Anitha, G. | Thangavel, M. | Suthir, S.

Article Type: Research Article

Abstract: Traditional testimony and electronic endorsements are extremely challenging to uphold and defend, and there is a problem with challenging authentication. The identity of the student is typically not recognized when it comes to requirements for access to a student’s academic credentials that are scattered over numerous sites. This is an issue with cross-domain authentication methods. On the one hand, whenever the volume of cross-domain authentication requests increases dramatically, the response time can become intolerable because of the slow throughput associated with blockchain mechanisms. These systems still do not give enough thought to the cross-domain scenario’s anonymity problem. This research proposes …an effective cross-domain authentication mechanism called XAutn that protects anonymity and integrates seamlessly through the present Certificate Transparency (CT) schemes. XAutn protects privacy and develops a fast response correctness evaluation method that is based on the RSA (Rivest, Shamir, and Adleman) cryptographic accumulator, Zero Knowledge Proof Algorithm, and Proof of Continuous work consensus Algorithm (POCW). We also provide a privacy-aware computation authentication approach to strengthen the integrity of the authentication messages more securely and counteract the discriminatory analysis of malevolent requests. This research is primarily used to validate identities in a blockchain network, which makes it possible to guarantee their authenticity and integrity while also increasing security and privacy. The proposed technique greatly outperformed the current methods in terms of authentication time, period required for storage, space for storage, and overall processing cost. The proposed method exhibits a speed gain of authentication of roughly 9% when compared to traditional blockchain systems. The security investigation and results from experiments demonstrate how the proposed approach is more reliable and trustworthy. Show more

Keywords: Zero Knowledge Proof, RSA accumulator, educational certificates, cross-domain authentication, blockchain

DOI: 10.3233/JIFS-235140

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-20, 2023

Authors: Lakshmi Narayanan, K. | Naresh, R.

Article Type: Research Article

Abstract: Vehicular Ad-Hoc Network (VANET) Technology is advancing due to the convergence of VANET and cloud computing technologies, Vehicular Ad-Hoc Network (VANET) entities can benefit from the cloud service provider’s favourable storage and computing capabilities. Cloud computing, the processing and storage capabilities provided by various cloud service providers, would be available to all VANET enterprises. Digital Twin helps in creating a digital view of the Vehicle. It focuses on the physical behaviour of the Vehicle as well as the software it alerts when it finds issues with the performance. The representation of the Vehicle is created using intelligent sensors, which are …in OBU of VANET that help collect info from the product. The author introduces the Cloud-based three-layer key management for VANET in this study. Because VANET connections can abruptly change, critical negotiation verification must be completed quickly and with minimal bandwidth. When the Vehicles are in movement, we confront the difficulty in timely methods, network stability, and routing concerns like reliability and scalability. We must additionally address issues such as fair network access, inappropriate behaviour identification, cancellation, the authentication process, confidentiality, and vehicle trustworthiness verification. The proposed All-Wheel Control (AWC) method in this study may improve the safety and efficiency of VANETs. This technology would also benefit future intelligent transportation systems. The Rivest–Shamir–Adleman (RSA) algorithm and Chinese Remainder Theorem algorithms generate keys at the group, subgroup, and node levels. The proposed method produces better results than the previous methods. Show more

Keywords: Cloud computing, VANET, RSA, CRT, AWC

DOI: 10.3233/JIFS-233527

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Zhao, Liang | Wang, Jiawei | Liu, Shipeng | Yang, Xiaoyan

Article Type: Research Article

Abstract: Tunnels water leakage detection in complex environments is difficult to detect the edge information due to the structural similarity between the region of water seepage and wet stains. In order to address the issue, this study proposes a model comprising a multilevel transformer encoder and an adaptive multitask decoder. The multilevel transformer encoder is a layered transformer to extract the multilevel characteristics of water leakage information, and the adaptive multitask decoder comprises the adaptive network branches. The adaptive network branches generate the ground truths of wet stains and water seepage through the threshold value and transmit them to the network …for training. The converged network, the U-net, fuses coarse images from the adaptive multitask decoder, and the fusion images are the final segmentation results of water leakage in tunnels. The experimental results indicate that the proposed model achieves 95.1% Dice and 90.4% MIOU, respectively. This proposed model demonstrates a superior level of precision and generalization when compared to other related models. Show more

Keywords: Water leakage, multilevel transformer encoder, adaptive multitask decoder, adaptive network branches, converged network

DOI: 10.3233/JIFS-224315

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Sugin Lal, G. | Porkodi, R.

Article Type: Research Article

Abstract: The term “educational data mining” refers to a field of study where information from academic environments is predicted using data mining, machine learning, and statistics. Education is the act of giving or receiving knowledge to or from someone who is formally studying and developing a natural talent. Over time, scholars have used data mining techniques to uncover hidden information in educational statistics and other external elements. This study suggests a unique method for analysing academic student performance that is based on data mining and machine learning. Here, the input is gathered as a dataset of student academic performance and is …processed for normalisation and noise reduction. Then, using the Boltzmann deep learning model coupled with linear kernel principal component analysis, this data’s characteristics were retrieved and chosen. Based on weights, information gain, and the Gini index, the characteristics are assessed and optimised. Following the selection of the pertinent data, conditional random field-based probabilistic clustering model is performed using RNN-based training, and the academic performance of the students is then examined using voting classifiers and sparse features. Experimental results are carried out for students academic performance dataset based on subjects in terms of training accuracy, validation accuracy, mean average precision, mean square error and correlation evaluation. Proposed technique attained accuracy of 96%, precision of 95%, Correlation Evaluation of 92% . Show more

Keywords: Student performance analysis, data mining, machine learning, clustering model, academic performance

DOI: 10.3233/JIFS-235350

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024

Authors: Mohan, M. | Tamizhazhagan, V. | Balaji, S.

Article Type: Research Article

Abstract: Cloud computing is a new technology that provides services to customers anywhere, anytime, under varying conditions and managed by a third-party cloud provider. Even though cloud computing has progressed a lot, some attacks still happen. The recent anomalous and signature attacks use clever strategies such as low-rate attacks and attacking as an authenticated user. In this paper, a novel Attack Detection and Prevention (ADAPT) method is proposed to overcome this issue. The proposed system consists of three stages. An Intrusion Detection System is initially used to check whether there is an attack or not by comparing the IP address in …the Blacklist IP Database. If an attack occurs, the IP address will be added to the Blacklist IP database and blocked. The second stage uses Bi-directional LSTM and Bi-directional GRU to check the anomalous and signature attack. In the third stage, classified output is sent to reinforcement learning, if any attack occurs the IP address is added to the blacklist IP database otherwise the packets are forwarded to the user. The proposed ADAPT technique achieves a higher accuracy range than existing techniques. Show more

Keywords: Cloud computing, Bi-directional LSTM, Bi-directional GRU, IP address, and reinforcement learning

DOI: 10.3233/JIFS-236371

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024

Authors: Li, Tao | Zhang, Zhongyu | Tao, Zhigang | Jia, Xinyu | Wang, Xiaolong | Wang, Jian

Article Type: Research Article

Abstract: Rock crack is one of the main factors responsible for rock failure. Uniaxial compression creep tests are performed using acoustic emission techniques, a high-sensitivity, non-radiative, non-destructive testing method to understand the influence of crack number on the precursor characteristics of short-term creep damage in the fractured rock mass. Based on the Grassberger-Procaccia (G-P) algorithm, the calculation step size for the correlation dimension value (D 2 ) of the acoustic emission ringing count rate is consistent with that for the acoustic emission b -value. The influence of the number of pre-cracks on the Acoustic emission precursor characteristics of red sandstone …creep is analyzed. The results show that near the destabilization of the specimen, the Acoustic emission accumulative ringing count surges in a stepwise manner, the Acoustic emission b -value decreases, the D 2 -value increases, the Acoustic emission amplitude shows high intensity and high frequency, and the ringing count increases sharply, all with the characteristics of failure precursors. During the accelerated creep stage of the specimens, with the increase of pre-cracks number, the precursory time points of acoustic emission b -value and D 2 -value advance, and their acoustic emission ringing counts increase sharply. Show more

Keywords: Acoustic emission, b-value, correlation dimension value (D2), precursor information, pre-cracks

DOI: 10.3233/JIFS-238964

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024

Authors: Hou, Xiaoyu | Luo, Chao | Gao, Baozhong

Article Type: Research Article

Abstract: Candlesticks are widely used as an effective technical analysis tool in financial markets. Traditionally, different combinations of candlesticks have formed specific bullish/bearish patterns providing investors with increased opportunities for profitable trades. However, most patterns derived from subjective expertise without quantitative analysis. In this article, combining bullish/bearish patterns with ensemble learning, we present an intelligent system for making stock trading decisions. The Ensemble Classifier through Multimodal Perturbation (ECMP) is designed to generate a diverse set of precise base classifiers to further determine the candlestick patterns. It achieves this by: first, introducing perturbations to the sample space through bootstrap sampling; second, employing …an attribute reduction algorithm based on neighborhood rough set theory to select relevant features; third, perturbing the feature space through random subspace selection. Ultimately, the trading decisions are guided by the classification outcomes of this procedure. To evaluate the proposed model, we apply it to empirical investigations within the context of the Chinese stock market. The results obtained from our experiments clearly demonstrate the effectiveness of the approach. Show more

Keywords: Trading system, ensemble learning, multimodal perturbation method, neighborhood rough set theory

DOI: 10.3233/JIFS-237087

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-19, 2024

Authors: Zhao, Bin | Cao, Wei | Zhang, Jiqun | Gao, Yilong | Li, Bin | Chen, Fengmei

Article Type: Research Article

Abstract: Aiming at the issue that the current click-through rate prediction methods ignore the varying impacts of different input features on prediction accuracy and exhibit low accuracy when dealing with large-scale data, a click-through rate prediction method (GBIFM) which combines Gradient Boosting Decision Tree (GBDT) and Input-aware Factorization Machine (IFM) is proposed in this paper. The proposed GBIFM method employs GBDT for data processing, which can flexibly handle various types of data without the need for one-hot encoding of discrete features. An Input-aware strategy is introduced to refine the weight vector and embedding vector of each feature for different instances, adaptively …learning the impact of each input vector on feature representation. Furthermore, a fully connected network is incorporated to capture high-order features in a non-linear manner, enhancing the method’s ability to express and generalize complex structured data. A comprehensive experiment is conducted on the Criteo and Avazu datasets, the results show that compared to typical methods such as DeepFM, AFM, and IFM, the proposed method GBIFM can increase the AUC value by 10% –12% and decrease the Logloss value by 6% –20%, effectively improving the accuracy of click-through rate prediction. Show more

Keywords: Click-through rate estimation, GBIFM, GBDT, IFM

DOI: 10.3233/JIFS-234713

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024

Authors: Zhai, Shanshan | Fan, Jianping | Liu, Lin

Article Type: Research Article

Abstract: Neutrosophic cubic set (NCS) can process complex information by choosing both interval value and single value membership and indeterminacy and falsehood components. The aggregation operators based on Aczel-Alsina t-norm and t-corm are quite effective for evaluating the interrelationship among attributes. The purpose of this paper is to diagnose the interrelationship among attributes with neutrosophic cubic information, and propose a multi-attribute decision-making(MADM) method for supplier selection problem with unknown weight under neutrosophic cubic environment. We defined neutrosophic cubic Aczel-Alsina (NC-AA) operator and neutrosophic cubic Aczel–Alsina weighted arithmetic average (NCAAWAA) operator, then we discussed various important results and some properties of the …proposed operators. Additionally, we proposed a MADM method under the presence of the NC-AAWAA operator. When the weights of attributes are unknown, we use the MEREC method to determine the weights. Later, the NC-AAWAA operator and MEREC method are applied to address the supplier selection problem. Finally, a sensitivity analysis and a comparative analysis are conducted to illustrate the stability and superiority of the proposed method. The results show the NC-AAWAA operator can handle the interrelationship among complex information more effectively, and MEREC method can weight the attributes based on the removal effect of a neutrosophic cubic attribute. Show more

Keywords: Multi-attribute decision-making (MADM), neutrosophic cubic set (NCS), Aczel-Alsina aggregation operators, MEREC method

DOI: 10.3233/JIFS-235274

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-22, 2024

Authors: Hong, Yuntao

Article Type: Research Article

Abstract: Obsessive-compulsive disorder (OCD) is a chronic disease and psychosocial disorder that significantly reduces the quality of life of patients and affects their personal and social relationships. Therefore, early diagnosis of this disorder is of particular importance and has attracted the attention of researchers. In this research, new statistical differential features are used, which are suitable for EEG signals and have little computational load. Hilbert-Huang transform was applied to EEGs recorded from 26 OCD patients and 30 healthy subjects to extract instant amplitude and phase. Then, modified mean, variance, median, kurtosis and skewness were calculated from amplitude and phase data. Next, …the difference of these statistical features between various pairs of EEG channels was calculated. Finally, different scenarios of feature classification were examined using the sparse nonnegative least squares classifier. The results showed that the modified mean feature calculated from the amplitude and phase of the interhemispheric channel pairs produces a high accuracy of 95.37%. The frontal lobe of the brain also created the most distinction between the two groups among other brain lobes by producing 90.52% accuracy. In addition, the features extracted from the frontal-parietal network produced the best classification accuracy (93.42%) compared to the other brain networks examined. The method proposed in this paper dramatically improves the accuracy of EEG classification of OCD patients from healthy individuals and produces much better results compared to previous machine learning techniques. Show more

Keywords: Obsessive-compulsive disorder (OCD), Electroencephalogram (EEG), Hilbert-Huang transform, statistical features, classification

DOI: 10.3233/JIFS-237946

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024

Authors: Zhao, Xixi | Gu, Liang | Duan, Xiaorong | Wang, Liguo | Li, Zhenxi

Article Type: Research Article

Abstract: Cloud storage attribute libraries usually store a large amount of sensitive data such as personal information and trade secrets. Attackers adopt diverse and complex attack methods to target the cloud storage attribute database, which makes the defense work more challenging. In order to realize the secure storage of information, an attribute based cloud storage anti-attack algorithm based on dynamic authorization access is proposed. According to the characteristic variables of the sample, the data correlation matrix is calculated, and the principal component analysis method is adopted to reduce the dimension of the data, build the anti-attack code model, simulate the dynamic …authorization access rights, and calculate the packet loss rate according to the anti-attack flow. Design the initialization stage, cluster stage and cluster center update stage to realize the attack prevention of cloud storage attribute database. The experimental results show that the proposed algorithm can accurately classify the anti-attack code, has good packet processing ability, relatively short page request time, and anti-attack success rate is higher than 90%, which can effectively ensure the stability of the algorithm. Show more

Keywords: Dynamic authorization access, cloud storage attributes, basic anti-attack algorithm, anti-attack code model, access permissions

DOI: 10.3233/JIFS-237409

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024

Authors: Ning, Yi | Liu, Meiyu | Guo, Xifeng | Liu, Zhiyong | Wang, Xinlu

Article Type: Research Article

Abstract: Accurate load forecasting is an important issue for safe and economic operation of power system. However, load data often has strong non-stationarity, nonlinearity and randomness, which increases the difficulty of load forecasting. To improve the prediction accuracy, a hybrid short-term load forecasting method using load feature extraction based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and refined composite multi-scale entropy (RCMSE) and improved bidirectional long short time memory (BiLSTM) error correction is proposed. Firstly, CEEMDAN is used to separate the detailed information and trend information of the original load series, RCMSE is used to reconstruct the feature …information, and Spearman is used to screen the features. Secondly, an improved butterfly optimization algorithm (IBOA) is proposed to optimize BiLSTM, and the reconstructed components are predicted respectively. Finally, an error correction model is constructed to mine the hidden information contained in error sequence. The experimental results show that the MAE, MAPE and RMSE of the proposed method are 645 kW, 0.96% and 827.3 kW respectively, and MAPE is improved by about 10% compared with other hybrid models. Therefore, the proposed method can overcome the problem of inaccurate prediction caused by data and inherent defects of models and improve the prediction accuracy. Show more

Keywords: Short-term load forecasting, complete ensemble empirical mode decomposition with adaptivenoise, refined composite multi-scale entropy, improved butterfly optimization algorithm, bidirectional long short time memory neural network

DOI: 10.3233/JIFS-237993

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024

Authors: Arulmurugan, A. | Jose Moses, G. | Gandhi, Ongole | Sheshikala, M. | Arthie, A.

Article Type: Research Article

Abstract: In the current scenario, feature selection (FS) remains one of the very important functions in machine learning. Decreasing the feature set (FSt) assists in enhancing the classifier’s accuracy. Because of the existence of a huge quantity of data within the dataset (DS), it remains a colossal procedure for choosing the requisite features out of the DS. Hence, for resolving this issue, a new Chaos Quasi-Oppositional-based Flamingo Search Algorithm with Simulated Annealing Algorithm (CQOFSASAA) has been proffered for FS and for choosing the optimum FSt out of the DSs, and, hence, this lessens the DS’ dimension. The FSA technique can be …employed for selecting the optimal feature subset out of the DS. Generalized Ring Crossover has been as well embraced for selecting the very pertinent features out of the DS. Lastly, the Kernel Extreme Learning Machine (KELM) classifier authenticates the chosen features. This proffered paradigm’s execution has been tested by standard DSs and the results have been correlated with the rest of the paradigms. From the experimental results, it has been confirmed that this proffered CQOFSASAA attains 93.74% of accuracy, 92% of sensitivity, and 92.1% of specificity. Show more

Keywords: Quasi-oppositional, feature selection, Flamingo Search Algorithm, Simulated Annealing, convergence rate

DOI: 10.3233/JIFS-233557

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2023

Authors: Harikumar, Yedhu | Muthumeenakshi, M.

Article Type: Research Article

Abstract: The Indian stock market is a dynamic, complicated system that is impacted by many different variables, making it difficult to anticipate its future. The utilization of deep learning and optimization techniques to forecast stock market movements has gained popularity in recent years. To foresee the Indian stock market, an innovative approach is presented in this study that combines the Grey Wolf Optimization algorithm with a hybrid Convolutional Neural Network (CNN) and Bi-Directional Long-Short Term Memory (Bi-LSTM) framework. The stock market information is first pre-processed utilizing a CNN to extract pertinent features. The Bi-LSTM system, that is intended to capture the …long-term dependencies and temporal correlations of the stock market statistics, is then fed the CNN’s outcome. The model parameters are then optimized utilizing the Grey Wolf Optimization (GWO) technique, which also increases forecasting accuracy. The findings demonstrate that, in terms of forecasting accuracy, the suggested method outperforms a number of contemporary methods, including conventional time series models, neural networks, and evolutionary algorithms. Thus, the suggested methodology provides an effective way to forecast the Indian stock market by combining deep learning and optimization approaches. Show more

Keywords: Indian stock market, grey wolf optimization, deep learning approach, bi-directional long-short term memory, convolutional neural network

DOI: 10.3233/JIFS-233716

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Yu, Xingping | Yang, Yang

Article Type: Research Article

Abstract: The rapid advancement of communication and information technology has led to the expansion and blossoming of digital music. Recently, music feature extraction and classification have emerged as a research hotspot due to the difficulty of quickly and accurately retrieving the music that consumers are looking for from a large volume of music repositories. Traditional approaches to music classification rely heavily on a wide variety of synthetically produced aural features. In this research, we propose a novel approach to selecting the musical genre from user playlists by using a classification and feature selection machine learning model. To filter, normalise, and eliminate …missing variables, we collect information on the playlist’s music genre and user history. The characteristics of this data are then selected using a convolutional belief transfer Gaussian model (CBTG) and a fuzzy recurrent adversarial encoder neural network (FRAENN). The experimental examination of a number of music genre selection datasets includes measures of training accuracy, mean average precision, F-1 score, root mean squared error (RMSE), and area under the curve (AUC). Results show that this model can both create a respectable classification result and extract valuable feature representation of songs using a wide variety of criteria. Show more

Keywords: Music genre selection, user playlists, machine learning, classification, feature selection

DOI: 10.3233/JIFS-235478

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024

Authors: Prabu Sankar, N. | Usha, D.

Article Type: Research Article

Abstract: This research paper presents a novel approach to improving healthcare services in rural areas by leveraging the potential of Fuzzy Intelligence Systems, Internet of Bodies (IoB) devices, and Blockchain technology. It begins by exploring the design and development of a Blockchain-based Patients Record System (BPRS), which ensures secure, transparent, and tamper-proof storage of patient medical records. The paper then delves into the fabrication of advanced IoB devices, specifically designed to study and monitor the health of rural populations. These devices, integrated with Fuzzy Intelligence Systems, provide efficient and reliable data capture, interpretation, and decision-making support. The highlight of the study …is the innovative integration of the IoB enabled Patient Monitoring System with the BPRS, which ensures real-time data synchronization and secure access to patient data for authorized personnel. The system collectively promotes efficient healthcare delivery, data privacy, and patient safety in rural areas. Show more

Keywords: Fuzzy intelligence systems, blockchain-based patients record system, internet of bodies devices, rural health monitoring, integrated healthcare system

DOI: 10.3233/JIFS-233752

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-9, 2024

Authors: Wang, Hanpeng | Xiong, Hengen

Article Type: Research Article

Abstract: An improved genetic algorithm is proposed for the Job Shop Scheduling Problem with Minimum Total Weight Tardiness (JSSP/TWT). In the proposed improved genetic algorithm, a decoding method based on the Minimum Local Tardiness (MLT) rule of the job is proposed by using the commonly used chromosome coding method of job numbering, and a chromosome recombination operator based on the decoding of the MLT rule is added to the basic genetic algorithm flow. As a way to enhance the quality of the initialized population, a non-delay scheduling combined with heuristic rules for population initialization. and a PiMX (Precedence in Machine crossover) …crossover operator based on the priority of processing on the machine is designed. Comparison experiments of simulation scheduling under different algorithm configurations are conducted for randomly generated larger scale JSSP/TWT. Statistical analysis of the experimental evidence indicates that the genetic algorithm based on the above three improvements exhibits significantly superior performance for JSSP/TWT solving: faster convergence and better scheduling solutions can be obtained. Show more

Keywords: Improved genetic algorithm, total weight tardiness, minimum local tardiness, PiMX

DOI: 10.3233/JIFS-236712

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024

Authors: Ma, Chengfei | Yang, Xiaolei | Lu, Heng | He, Siyuan | Liu, Yongshan

Article Type: Research Article

Abstract: When calculating participants’ contribution to federated learning, addressing issues such as the inability to collect complete test data and the impact of malicious and dishonest participants on the global model is necessary. This article proposes a federated aggregation method based on cosine similarity approximation Shapley value method contribution degree. Firstly, a participant contribution calculation model combining cosine similarity and the approximate Shapley value method was designed to obtain the contribution values of the participants. Then, based on the calculation model of participant contribution, a federated aggregation algorithm is proposed, and the aggregation weights of each participant in the federated aggregation …process are calculated by their contribution values. Finally, the gradient parameters of the global model were determined and propagated to all participants to update the local model. Experiments were conducted under different privacy protection parameters, data noise parameters, and the proportion of malicious participants. The results showed that the accuracy of the algorithm model can be maintained at 90% and 65% on the MNIST and CIFAR-10 datasets, respectively. This method can reasonably and accurately calculate the contribution of participants without a complete test dataset, reducing computational costs to a certain extent and can resist the influence of the aforementioned participants. Show more

Keywords: Federated aggregation algorithm, contribution assessment, cosine similarity, Shapley value, equitable distribution

DOI: 10.3233/JIFS-236977

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024

Authors: Rachamadugu, Sandeep Kumar | Pushphavathi, T.P.

Article Type: Research Article

Abstract: This paper introduces an innovative approach, the LS-SLM (Local Search with Smart Local Moving) technique, for enhancing the efficiency of article recommendation systems based on community detection and topic modeling. The methodology undergoes rigorous evaluation using a comprehensive dataset extracted from the “dblp. v12.json” citation network. Experimental results presented herein provide a clear depiction of the superior performance of the LS-SLM technique when compared to established algorithms, namely the Louvain Algorithm (LA), Stochastic Block Model (SBM), Fast Greedy Algorithm (FGA), and Smart Local Moving (SLM). The evaluation metrics include accuracy, precision, specificity, recall, F-Score, modularity, Normalized Mutual Information (NMI), betweenness …centrality (BTC), and community detection time. Notably, the LS-SLM technique outperforms existing solutions across all metrics. For instance, the proposed methodology achieves an accuracy of 96.32%, surpassing LA by 16% and demonstrating a 10.6% improvement over SBM. Precision, a critical measure of relevance, stands at 96.32%, showcasing a significant advancement over GCR-GAN (61.7%) and CR-HBNE (45.9%). Additionally, sensitivity analysis reveals that the LS-SLM technique achieves the highest sensitivity value of 96.5487%, outperforming LA by 14.2%. The LS-SLM also demonstrates superior specificity and recall, with values of 96.5478% and 96.5487%, respectively. The modularity performance is exceptional, with LS-SLM obtaining 95.6119%, significantly outpacing SLM, FGA, SBM, and LA. Furthermore, the LS-SLM technique excels in community detection time, completing the process in 38,652 ms, showcasing efficiency gains over existing techniques. The BTC analysis indicates that LS-SLM achieves a value of 94.6650%, demonstrating its proficiency in controlling information flow within the network. Show more

Keywords: Recommender Systems (RS), BagofWords (BoW), Pearson Correlation Co-efficient based Latent Dirichlet Allocation (PCC-LDA), Linear Scaling based Smart Local Moving (LS-SLM), Time Frequency and Inverse Document Frequency (TF-IDF), Community detection

DOI: 10.3233/JIFS-233851

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024

Authors: Lalitha, V. | Latha, B.

Article Type: Research Article

Abstract: The most valuable information of Hyperspectral Image (HSI) should be processed properly. Using dimensionality reduction techniques in two distinct approaches, we created a structure for HSI to collect physiological and diagnostic information. The tissue Oxygen Saturation Level (StO2 ) was extracted using the HSI approach as a physiological characteristic for stress detection. Our research findings suggest that this unique characteristic may not be affected by humidity or temperature in the environment. Comparing the standard StO2 reference and pressure concentrations, the social stress assessments showed a substantial variance and considerable practical differentiation. The proposed system has already been evaluated on …tumor images from rats with head and neck cancers using a spectrum from 450 to 900 nm wavelength. The Fourier transformation was developed to improve precision, and normalize the brightness and mean spectrum components. The analysis of results showed that in a difficult situation where awareness could be inexpensive due to feature possibilities for rapid classification tasks and significant in measuring the structure of HSI analysis for cancer detection throughout the surgical resection of wildlife. Our proposed model improves performance measures such as reliability at 89.62% and accuracy at 95.26% when compared with existing systems. Show more

Keywords: Hyperspectral Image, dimensionality reduction, stress tests, cancer detection, fourier coefficients

DOI: 10.3233/JIFS-236935

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024

Authors: Fan, Jianping | Chai, Mingxuan | Wu, Meiqin

Article Type: Research Article

Abstract: In this manuscript, we construct a Multi-Criteria Decision-Making (MCDM) model to study the new energy vehicle (NEV) battery supplier selection problem. Firstly, we select criteria to build an evaluation index system. Secondly, SAWARA and MEREC methods are used to calculate subjective and objective weights in the ranking process, respectively, and PTIHFS (Probabilistic Triangular Intuitionistic Hesitant Fuzzy Set) is employed to describe the decision maker’s accurate preferences in performing the calculation of subjective weights. Then, the game theory is used to find the satisfactory weights. We use TFNs to describe the original information in the MARCOS method to obtain the optimal …alternative. Finally, a correlation calculation using Spearman coefficients is carried out to compare with existing methods and prove the model’s validity. Show more

Keywords: PTIHFS, SWARA, MEREC, MARCOS, game theory

DOI: 10.3233/JIFS-231975

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-19, 2024

Authors: Devi, Salam Jayachitra | Doley, Juwar | Gupta, Vivek Kumar

Article Type: Research Article

Abstract:  Object detection has made significant strides in recent years, but it remains a challenging task to accurately and quickly identify and detect objects. While humans can easily recognize objects in images or videos regardless of their appearance, computers face difficulties in this task. Object detection plays a crucial role in computer vision and finds applications in various domains such as healthcare, security, agriculture, home automation and more. To address the challenges of object detection, several techniques have been developed including RCNN, Faster RCNN, YOLO and Single Shot Detector (SSD). In this paper, we propose a modified YOLOv5s architecture that aims …to improve detection performance. Our modified architecture incorporates the C3Ghost module along with the SPP and SPPF modules in the YOLOv5s backbone network. We also utilize the Adam and Stochastic Gradient Descent (SGD) optimizers. The paper also provides an overview of three major versions of the YOLO object detection model: YOLOv3, YOLOv4 and YOLOv5. We discussed their respective performance analyses. For our evaluation, we collected a database of pig images from the ICAR-National Research Centre on Pig farm. We assessed the performance using four metrics such as Precision (P), Recall (R), F1-score and mAP  @ 0.50. The computational results demonstrate that our method YOLOv5s architecture achieves a 0.0414 higher mAP while utilizing less memory space compared to the original YOLOv5s architecture. This research contributes to the advancement of object detection techniques and showcases the potential of our modified YOLOv5s architecture for improved performance in real world applications. Show more

Keywords: Object detection, YOLO, convolutional neural networks, pig, and computer vision

DOI: 10.3233/JIFS-231032

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-19, 2024

Authors: Kexing, Zhang | Jiang, He

Article Type: Research Article

Abstract: Recent developments in wireless networking, big data technologies including 5G networks, healthcare big data analytics, the Internet of Things (IoT), sophisticated wearable technologies, and artificial intelligence (AI) have made it possible to design intelligent illness diagnostic models. In addition to its critical function in e-health applications, 5G-IoT is becoming a standard feature of intelligent software. Intelligent systems and architectures are necessary for e-health applications to counteract threats to the privacy of patients’ medical information. Using machine learning and IoMT, this research suggests a new approach to cloud data analysis using the 5G network in the context of a recommendation model. …This application of the 5G cloud network to the monitoring and analysis of healthcare data makes use of variational adversarial transfer convolutional neural networks. The treatment plan for abnormalities in a tolerant body is derived from this clustered outcome. Experiment analysis was performed for a number of healthcare datasets with respect to training precision, network efficiency, F-1 score, root-mean-squared error, and mean average precision as the metrics of interest. Show more

Keywords: 5G network, cloud data analysis, recommendation model, machine learning, internet of medical things (IoMT)

DOI: 10.3233/JIFS-235064

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-7, 2024

Authors: Rao, Bommaraju Srinivasa | Banerjee, Kakoli | Anand Deva Durai, C. | Balu, S. | Sahoo, Ashok Kumar | Priyadharshini, A. | Rama Krishna, Paladugu | Kakade, Revannath Babanrao

Article Type: Research Article

Abstract: In recent years, the Internet of Things (IoT) has rapidly emerged as an essential technology, enabling seamless communication between billions of interconnected devices. These devices generate a massive amount of data that requires efficient management to ensure optimum performance in IoT environments. Dynamic load balancing (DLB) is a crucial technique employed to distribute workloads evenly across multiple computing resources, thereby reducing latency and increasing the overall efficiency of IoT networks. This paper presents a novel DLB approach based on type-2 fuzzy logic systems (T2FLS) to enhance the performance and reliability of IoT environments. The proposed T2FLS-based DLB technique addresses the …inherent uncertainties and imprecisions in IoT networks by considering various parameters, such as workload, processing capability, and communication latency. A comprehensive performance evaluation is carried out to compare the proposed method with traditional DLB approaches. Simulation results demonstrate that the T2FLS-based DLB technique significantly improves the network’s response time, throughput, and energy efficiency, while also providing better adaptability and robustness to dynamic changes in IoT environments. This study contributes to the advancement of DLB techniques in IoT networks and lays the groundwork for further research in this field. Show more

Keywords: Dynamic load balancing, internet of things, type-2 fuzzy logic systems, performance evaluation, energy efficiency

DOI: 10.3233/JIFS-234105

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-9, 2024

Authors: Niyasudeen, F. | Mohan, M.

Article Type: Research Article

Abstract: With the growing reliance on cloud computing, ensuring robust security and data protection has become a pressing concern. Traditional cryptographic methods face potential vulnerabilities in the post-quantum era, necessitating the development of advanced security frameworks. This paper presents a fuzzy-enhanced adaptive multi-layered cloud security framework that leverages artificial intelligence, quantum-resistant cryptography, and fuzzy systems to provide comprehensive protection in cloud environments. The proposed framework incorporates data encryption, access control, and intrusion detection mechanisms, with fuzzy logic systems augmenting the decision-making process for threat detection and response. The integration of artificial intelligence and quantum-resistant cryptographic techniques enhances the framework’s adaptability and …resilience against emerging threats. The implementation of fuzzy systems further improves the accuracy and efficiency of the security mechanisms, ensuring robust protection in the face of uncertainty and evolving attack vectors. The fuzzy-enhanced adaptive multi-layered cloud security framework offers a comprehensive, adaptable, and efficient solution for securing cloud infrastructures, safeguarding sensitive data, and mitigating the risks associated with the post-quantum era. Show more

Keywords: Cloud security, artificial intelligence, quantum-resistant cryptography, fuzzy systems, adaptive multi-layered framework

DOI: 10.3233/JIFS-233462

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2023

Authors: Kandan, M. | Durai Murugan, A. | Ramu, Gandikota | Ramu, Gandikota | Gnanamurthy, R.K. | Bordoloi, Dibyahash | Rawat, Swati | Murugesan, | Prasad, Pulicherla Siva

Article Type: Research Article

Abstract: Privacy-Preserving Fuzzy Commitment Schemes (PPFCS) have emerged as a promising solution for secure Internet of Things (IoT) device authentication, addressing the critical need for privacy and security in the rapidly growing IoT ecosystem. This paper presents a novel PPFCS-based authentication mechanism that protects sensitive user data and ensures secure communication between IoT devices. The proposed scheme leverages error-correcting codes (ECC) and cryptographic hash functions to achieve reliable and efficient authentication. The PPFCS framework allows IoT devices to authenticate themselves without revealing their true identity, preventing unauthorized access and preserving users’ privacy. Furthermore, our PPFCS-based authentication mechanism is resilient against various …attacks, such as replay, man-in-the-middle, and brute-force attacks, by incorporating secure random nonce generation and timely key updates. We provide extensive experimental results and comparative analysis, demonstrating that the proposed PPFCS significantly outperforms existing authentication schemes in terms of security, privacy, and computational efficiency. As a result, the PPFCS offers a viable and effective solution for ensuring secure and privacy-preserving IoT device authentication, mitigating the risks associated with unauthorized access and potential data breaches in the IoT ecosystem. Show more

Keywords: Privacy-preserving, fuzzy commitment, IoT device authentication, error-correcting codes, cryptographic hash functions

DOI: 10.3233/JIFS-234100

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-9, 2023

Authors: Sitharamulu, V. | Mahammad Rafi, D. | Naulegari, Janardhan | Battu, Hanumantha Rao

Article Type: Research Article

Abstract: In this study, we investigate the viability of applying fuzzy reinforcement learning (FRL) to Internet of Things-based robots for purposes of autonomous navigation and collision avoidance. The proposed approach utilises FRL, IoT, and a sensor network to give the robot the ability to learn from its environment and act in accordance with those policies. The authors used FRL to train a mobile robot with wheels to move around and avoid obstacles, and then they put the robot through its paces in a virtual world. Results showed that the FRL-based technique improved the robot’s navigation and collision avoidance performance compared to …traditional rule-based approaches. The results of this study indicate that FRL may be a viable technique for enabling autonomous navigation and obstacle avoidance in IoT-based robotics. Show more

Keywords: Fuzzy reinforcement learning, IoT-based robotics, autonomous navigation, collision avoidance, sensor network

DOI: 10.3233/JIFS-233860

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Sharma, Amit | Naga Raju, M. | Hema, P. | Chaitanuya, Morsa | Jagannatha Reddy, M.V. | Vignesh, T. | Chandanan, Amit Kumar | Verma, Santhosh

Article Type: Research Article

Abstract: Wireless Sensor Networks (WSNs) have gained significant attention in recent years due to their wide range of applications, such as environmental monitoring, smart agriculture, and structural health monitoring. With the increasing volume of data generated by WSNs, efficient data analytics techniques are crucial for improving the overall performance and reducing energy consumption. This paper presents a novel distributed data analytics approach for WSNs using fuzzy logic-based machine learning. The proposed method combines the advantages of fuzzy logic for handling uncertainty and imprecision with the adaptability of machine learning techniques. It enables sensor nodes to process and analyze data locally, reducing …the need for data transmission and consequently saving energy. Furthermore, this approach enhances data accuracy and fault tolerance by incorporating the fusion of heterogeneous sensor data. The proposed technique is evaluated on a series of real-world and synthetic datasets, demonstrating its effectiveness in improving the overall network performance, energy efficiency, and fault tolerance. The results indicate the potential of our approach to be applied in various WSN applications that demand low-energy consumption and reliable data analysis. Show more

Keywords: Wireless sensor networks, distributed data analytics, fuzzy logic, machine learning, energy efficiency

DOI: 10.3233/JIFS-234007

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024

Authors: Kumar, Manoj | Sharma, Sukhwinder | Mittal, Puneet | Singh, Harmandeep | Singh, Sukhwinder

Article Type: Research Article

Abstract: The rapid expansion of Internet of Things (IoT) applications and the increasing complexity of Wireless Sensor Networks (WSNs) have created a critical need for efficient load balancing strategies. This paper proposes a dynamic load balancing approach for IoT-enabled WSNs using a fuzzy logic-based control mechanism. The proposed method aims to optimize energy consumption, reduce latency, and enhance network lifetime by intelligently distributing the workload among sensor nodes. The fuzzy logic controller takes into account various parameters, such as energy levels, communication distances, and node density, to make adaptive load balancing decisions. The control mechanism allocates tasks to the most suitable …nodes, ensuring efficient utilization of resources and preventing overloading of individual nodes. Simulations are conducted in diverse network scenarios to validate the performance of the proposed approach. Results demonstrate significant improvements in energy efficiency, latency reduction, and overall network lifetime compared to traditional load balancing techniques. The fuzzy logic-based control mechanism proves to be a promising solution for addressing the dynamic and resource-constrained nature of IoT-enabled WSNs, paving the way for more robust and resilient networks in various IoT applications. Show more

Keywords: IoT, Wireless Sensor Networks, load balancing, fuzzy logic, network lifetime

DOI: 10.3233/JIFS-234075

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024

Authors: Ganesh, Aurobind | Ramachandiran, R.

Article Type: Research Article

Abstract: Globally, the two main causes of young people dying are mental health issues and suicide. A mental health issue is a condition of physiological disorder that inhibits with the vital process of the brain. The amount of individuals with psychiatric illnesses has considerably increased during the past several years. The majority of individuals with mental disorders reside in India. The mental illness can have an impact on a person’s health, thoughts, behaviour, or feelings. The capacity of controlling one’s thoughts, emotions, and behaviour might help an individual to deal with challenging circumstances, build relationships with others, and navigate life’s problems. …With a primary focus on the healthcare domain and human-computer interaction, the capacity to recognize human emotions via physiological and facial expressions opens up important research ideas as well as application-oriented potential. Affective computing has recently become one of the areas of study that has received the greatest interest from professionals and academics in a variety of sectors. Nevertheless, despite the rise in articles published, the reviews of a particular aspect of affective computing in mental health still are limited and have certain inadequacies. As a result, a literature survey on the use of affective computing in India to make decisions about mental health issues is discussed. As a result, the paper focuses on how traditional techniques used to monitor and assess physiological data from humans by utilizing deep learning and machine learning approaches for humans’ affect recognition (AR) using Affective computing (AfC) which is a combination of computer science, AI, and cognitive science subjects (such as psychology and psychosocial). Show more

Keywords: Affective computing, mental Health, decision making, machine learning, deep learning

DOI: 10.3233/JIFS-235503

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2023

Authors: Prasad, Mal Hari | Swarnalatha, P.

Article Type: Research Article

Abstract: The model-based methods were utilized in order to produce the test cases for the behavioral model of a software system. Run test cases habitually or physically facilitates premature identification of requirement errors. Regression test suite design is thought-provoking as well as significant task in this automated test design. General techniques of regression testing comprise rerunning formerly accomplished tests as well as inspecting whether program behavior has modified as well as formerly fixed faults have recurred. Regression testing is carried out with the intension of assessing a system skillfully by means of logically picking the right least set of tests essential …to suitably cover a particular modification. Then again, the relapse testing occasions of experiment prioritization, test suite decrease, and relapse test choice are commonly focused on conditions, which recognize the experiments to pick or the experiment to run thusly in independent framework. As indicated by experiment prioritization, experiments are very much arranged ward upon some condition just as experiments with greatest need are run first to achieve a presentation objective. If there should be an occurrence of test suite decrease/minimization, experiment, which end up being ended over the long haul are dismissed from the test suite with the intension of making a minor arrangement of experiments. In the event of relapse test determination, from a prevalent unique suite, a subset of experiments is picked. Show more

Keywords: Test case prioritization, test criteria, generalized predictive control, rudder performance testing system

DOI: 10.3233/JIFS-233547

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Vinoth Kumar, M. | Supreeth, B.R. | Hariprabhu, M. | Shanmuga Priya, P. | Ahmed, Ahmed Najat | Nagrare, Trupti | Mathur, Shruti | Manikandan, G.

Article Type: Research Article

Abstract: Containerized data centers (CDCs) have experienced rapid growth in recent years, owing to their modular and scalable nature. However, ensuring reliability and early fault detection in these complex systems is critical. This paper presents a novel Fuzzy Logic-based Fault Detection (FLFD) framework for CDCs using Digital Twins (DTs). The proposed approach employs DTs to create accurate virtual representations of the CDCs, which enable real-time monitoring and analysis of the physical systems. This paper focuses on three main aspects: (1) the development of a comprehensive DT model for CDCs, (2) the design and implementation of a FLFD algorithm, and (3) the …validation of the proposed approach through extensive simulations and real-world case studies. The FLFD algorithm leverages fuzzy logic principles to identify and localize faults in the system, thereby enhancing the overall fault detection accuracy and reducing false alarms. Results demonstrate the effectiveness of the proposed framework, with significant improvements in fault detection performance and system reliability. The FLFD approach offers a promising solution for proactive maintenance and management in containerized data centers, paving the way for more efficient and resilient operations. Show more

Keywords: Fuzzy logic, fault detection, containerized data centers, digital twins, proactive maintenance

DOI: 10.3233/JIFS-233736

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2023

Authors: Famila, S. | Jawahar, A. | Arthi, A. | Supriya, N. | Ramadoss, P.

Article Type: Research Article

Abstract: The maximization of lifetime in Wireless Sensor Networks (WSNs) is always made feasible by conserving energy and maintaining synchronization in the connectivity between its nodes. The selection of Cluster head (CH) methodology used during data dissemination process from the CH to the BS determines the energy conversation which is necessary for extending the network’s lifetime. Initially, the nodes are localized using Graphical Recurrent Neural Network. In this research, a hybrid monarchy butterfly and chicken swarm optimization based cluster head selection (HMB-CSO-CHS) method is used to enhance the lifespan of sensor networks. This suggested HMB-CSO-CHS Scheme uses the benefits of the …Hybrid Monarchy butterfly and chicken swarm optimization algorithm for the efficient selection of cluster heads by establishing reliable tradeoffs between their exploitation and exploration potentials with optimized convergence rate. The simulation-based investigation of the suggested HMB-CSO-CHS Scheme confirms its effectiveness in reducing the rate of mortality among the sensor nodes such that remarkable improvement in lifetime can be realized in the network When analyzing HMB-CSO-CHS method, it is noted that energy consumption and packet delivery ratio is completely reduced when comparing with existing methods. Show more

Keywords: Monarchy butterfly, chicken swarm optimization, cluster head selection, exploitation, exploration, best individual solution

DOI: 10.3233/JIFS-233681

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2023

Authors: Venkata Vidyalakshmi, Guggilam | Gopikrishnan, S.

Article Type: Research Article

Abstract: In the realm of Internet of Things (IoT) sensor data, missing patterns often occur due to sensor glitches and communication problems. Conventional missing data imputation methods struggle to handle multiple missing patterns, as they fail to fully leverage the available data as well as partially imputed data. To address this challenge, we propose a novel approach called Univariate data Imputation using Fast Similarity Search (UIFSS). The proposed method solved the missing data problem of IoT data using fast similarity search that can suits different patterns of missingness. Exploring similarities between data elements, a problem known as all-pairs-similarity-search, has been extensively …studied in fields like text analysis. Surprisingly, applying this concept to time series subsequences hasn’t seen much progress, likely due to the complexity of the task. Even for moderately sized datasets, the traditional approach can take a long time, and common techniques to speed it up only help a bit. Notably, for very large datasets, our algorithm can be easily adapted to produce high-quality approximate results quickly. UIFSS consists of two core components:Sensor sorting with Similar Node Clustering (SSNC) and Imputation Estimator using Fast Similarity Search(IEFSS). The SSNC, encompassing missing sensor sorting depending on their entropy to guide the imputation process. Subsequently, IEFSS uses global similar sensors and captures local region volatility, prioritizing data preservation while improving accuracy through z-normalized query based similarity search. Through experiments on simulated and bench mark datasets, UIFSS outperforms existing methods across various missing patterns. This approach offers a promising solution for handling missing IoT sensor data and with improved imputation accuracy. Show more

Keywords: Data imputation, internet of things, spatial correlation, univariate data, data quality, similarity search

DOI: 10.3233/JIFS-233446

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-19, 2023

Authors: Praba, M.S. Bennet | Subashka Ramesh, S.S.

Article Type: Research Article

Abstract: A unique system that offers traffic management, mobility management, and proactive vulnerability identification is the vehicular ad hoc network (VANET). With the use of efficient deep learning algorithms, intrusion prevention practices can improve their reliability. Many assaults, like Sybil, Blackhole, Wormhole, DoS attack, etc. expose them to risk. These intrusions compromise efficiency and dependability by taking advantage of network connectivity. The use of amazingly precise learning models to anticipate a variety of threats in VANET has not yet been thoroughly explored. To categorize numerous attacks on the VANET scenario, we develop a novel efficient integrated Long Short Term Memory (LSTM) …paradigm. The system employs the Panthera Leo Hunting Optimization (PLHO) method to modify the hyper-parameters of the systems to enhance the LSTM model’s detection rate under different threat situations. SUMO-OMNET++and Veins, two well-known modeling programs were utilized to gather the various VANET variables for both normal and malicious scenarios. The improved LSTM model was evaluated using actual information that had been recorded. The outcomes from the various learning models were merged with performance measures to show the algorithm’s efficiency and individuality. As the space between nearer vehicles reduces abruptly, a collision happens. So, to provide a realistic collision prevention system, it is necessary to collect exact and detailed information on the distance between every vehicle and all of the nearby vehicles. We suggest using a Carbon Nanotube Network (CNT) combined with the other Nanodevices to achieve reliability on the scale of millimeters. Modeling findings that the proposed novel approach succeeded with strong recognition capabilities. Show more

Keywords: Vehicular ad-hoc networks, traffic management, long short term memory, panthera leo hunting, nanotechnology devices

DOI: 10.3233/JIFS-234401

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2023

Authors: Elangovan, D. | Subedha, V.

Article Type: Research Article

Abstract: Opinion Mining and Sentiment Analysis acts as a pivotal role in facilitating businesses to actively operate on enhancing the business strategies and accomplish detailed insights of the consumer’s feedback regarding the products. In recent times, deep learning (DL)technique has been used for many sentiment analysis tasks and has attained effective outcomes. Huge quantity of product reviews is being posted by the customer on different e-commerce and social networking platforms which can assist the developers to improve the quality of the products. The study focuses on the design of Sentiment Classification on Online Product Reviews using Dwarf Mongoose Optimization with Attention …based Deep Learning (DMO-ABDL) model. The proposed DMO-ABDL technique analyzes the product reviews for the identification of sentiments. To accomplish this, the DMO-ABDL technique performs different stages of preprocessing to transform the actual data into suitable format. Furthermore, the Glove technique is employed for word embedding process. Moreover, attention based long short-term memory (ALSTM) approach was exploited for sentiment classification and its hyperparameters can be optimally chosen by the DMO technique. A comprehensive set of experiments were performed in order to guarantee the enhanced sentiment classification performance of the DMO-ABDL algorithm. A brief comparative study highlighted the supremacy of the DMO-ABDL technique over other existing approaches under different measures. Show more

Keywords: Sentiment analysis, natural language processing, hybrid models, deep learning, hyperparameter optimization

DOI: 10.3233/JIFS-233611

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Abd Algani, Yousef Methkal | Babu, K. Suresh | Beram, Shehab Mohamed | Al Ansari, Mohammed Saleh | Tapia-Silguera, Ruben Dario | Borda, Ricardo Fernando Cosio | Bala, B. Kiran

Article Type: Research Article

Abstract: Growing older is a phenomenon that is associated with increasingly complex health situations as a result of the coexistence of several chronic diseases. As a result, there is a downward tendency in both older people and their caretakers’ quality of life, which frequently results in frailty. There are numerous solutions available to treat the issue, which primarily affects older people. The basic and most popular imaging method for predicting cognitive impairment is magnetic resonance imaging. Furthermore, few of the earlier models had a definite level of accuracy when diagnosing the condition. Further, there is a critical need to put in …place a stronger, more reliable approach to precise prediction. When compared to other procedures, using magnetic resonance images to predict cognitive decline is the safest and most straightforward. The advanced concept for a better optimized strategy to predict cognitive impairment at an early stage is presented in this research. The hybrid krill herd and grey wolf optimization method is offered as a solution to address the challenges in locating the impacted area. In a short amount of time, a significant number of MRI images are analyzed, and the results show a more precise or higher rate of recognition. Show more

Keywords: Fuzzy model, soft computing, cognitive impairment, dementia, fuzzy C-Means clustering

DOI: 10.3233/JIFS-233695

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2023

Authors: Pradeep, M. | Sivaji, U. | Nithya, B. | Kadiravan, G. | Preethi, D. | Painam, Ranjith Kumar

Article Type: Research Article

Abstract: The mapping function must identify the reference model and detect coordinate arrangement by observing a repository with deep learning. Progression model with coordinate arrangement composition should have various positional displacements from one location to another. A prerogative classification model is an evolution of factor accomplishment in a repository method. Coordinate arrangement with calculation method must formulate a model locality twirl in classification method of a reference in dominance factor of perpetuity position observation by procession of reference localities. In a procession model observation by location, tendency method should be rotated from locality position into another coordinate method, with a PDD …factor measuring DPA of cadent RFT with an origin of 92.6, a cadent DS intermediate factor of 95.2, culmination factor of cadent RFT of 94.1. The docile exploratory arrangement of heuristic parameters is used in existing system to perceive phenomena such as sprout, enrollment discernment, demeanour, gravest perforation measure, Model of a heretic in apprehension method by premonition incongruity. Annotation should identify classification process using a proposed model to obtain massive measure of imputation function, In PDD measure of DPA in Cadent DS, with inception of 96.1, intercession of Cadent RFT in 92.6, with crowning of Cadent RFT in 96.4, 93.2 Show more

Keywords: MRCAI, Goin Twirl, maginot, idiosyncrasy outline, coffer atavism, flocculent utter eminence kedge

DOI: 10.3233/JIFS-234739

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2023

Authors: Ahamed, Ayoobkhan Mohamed Uvaze | Joel Devadass Daniel, D.J. | Seenivasan, D. | Rukumani Khandhan, C. | Radhakrishnan, S. | Daya Sagar, K.V. | Bhardwaj, Vivek | Nishant, Neerav

Article Type: Research Article

Abstract: Time-sensitive programs that are linked to smart services, such as smart healthcare as well as smart cities, are supported in large part by the fog computing domain. Due to the increased speed limitation of the cloud, Cloud Computing (CC) is a competent platform for fog in data processing, but it is unable to meet the demands of time-sensitive programs. The procedure of resource provisioning, as well as allocation in either a fog-cloud structure, takes into account dynamic changes in user requirements, and resources with limited access in fog devices are more difficult to manage. Due to the continual changes in …user requirement factors, the deadline represents the biggest obstacle in the fog computing structure. Hence the objective is to minimize the total cost involved in scheduling by maximizing resource utilization. For dynamic scheduling in the fog-cloud computing model, the efficiency of hybridization of the Grey Wolf Optimizer (GWO) and Lion Algorithm (LA) is developed in this study. In terms of energy costs, processing costs, and communication costs, the created GWOMLA-based Deep Belief Network (DBN) performed better and outruns the other traditional models. Show more

Keywords: Fog-cloud computing environment, deep learning, deep belief network (DBN), lion algorithm (LA), grey wolf optimizer (GWO).

DOI: 10.3233/JIFS-234030

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2023

Authors: Rajesh Kanna, R. | Ulagamuthalvi, V.

Article Type: Research Article

Abstract: Diagnosis is given top priority in terms of farm resource allocation, because it directly affects the GDP of the country. Crop analysis at an early stage is important for verifying the efficient crop output. Computer vision has a number of intriguing and demanding concerns, including disease detection. After China, India is the world’s second-largest creator of wheat. However, there exist algorithms that can accurately identify the most prevalent illnesses of wheat leaves. To help farmers keep track on a large area of wheat plantation, leaf image and data processing techniques have recently been deployed extensively and in pricey systems. In …this study, a hybrid pre-processing practice is used to remove undesired distortions while simultaneously enhancing the images. Fuzzy C-Means (FCM) is used to segment the affected areas from the pre-processed images. The data is then incorporated into a disease classification model using a Convolutional Neural Network (CNN). It was tested using Kaggle data and several metrics to see how efficient the suggested approach was. This study demonstrates that the traditional Long-Short Term Memory (LSTM) technique achieved 91.94% accuracy on the input images, but the hybrid pre-processing model with CNN achieved 95.06 percent accuracy. Show more

Keywords: Plant leaves diseases, convolutional neural network, fuzzy c-means, wheat production, pre-processing techniques

DOI: 10.3233/JIFS-233672

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Prabu Shankar, K.C. | Shyry, S. Prayla

Article Type: Research Article

Abstract: Early detection of diseases in men and women can improve treatment and reduce the risk involved in human life. Nowadays techniques which are non-invasive in nature are popularly used to detect the various types of diseases. Histopathological analysis plays a major role in finding the nature of the disease through medical images. Manual interpretation of these medical imaging takes time, is tedious, subjective, and can have human errors. It has also been discovered that the interpretation of these images varies amongst diagnostic labs. As computer power and memory capacity have increased, methodologies and medical image processing techniques have been developed …to interpret and analyse these images as a substitute for human involvement. The challenge lies in devising an efficient pre-processing technique that helps in analysing, processing and preparing the medical image for further diagnostics. This research provides a hybrid technique that reduces noise in the NITFI medical image by using a 2D adaptive median filter at level 1. The edges of the filtered medical image are preserved using the modified CLAHE algorithm which preserves the local contrast of the image. Expectation Maximization (EM) algorithm extracts the ROI part of the image which helps in easy and accurate identification of the disease. All the three steps are run over the 3D image slices of a NIFTI image. The proposed method proves that it achieves close to ideal RMSE, PSNR and UQI values as well as achieves an average runtime of 37.193 seconds for EM per slice. Show more

Keywords: 2D adaptive, expectation maximization, NIFTI, UQI, edge preservation, 3D slice, computational intelligence

DOI: 10.3233/JIFS-233931

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2023

Authors: Rajendran, Aishwarya | Ganesan, Sumathi | Rathis Babu, T.K.S.

Article Type: Research Article

Abstract: Brain tumor is observed to be grown in irregular shape and presented deep inside the tissues that led to cancer. Human brain tumor identification and categorization are performed with high latency, but also an essential task for the medical experts. The assistance through the automated diagnosis is generally utilized for the advancement in the diagnosis ability in order to get superior accuracy in brain tumor detection. Although the researches are enhancing the brain tumor detection performance, the highly challenging is to segment the brain tumor since it has variability concerning the tumor type, contrast, image modality and also in other …factors. To meet up all the challenges, a novel classification method is introduced using segmentation and machine learning approaches. Initially, the required images are collected from benchmark data sources. The input images are undergone for pre-processing stage, where it is done via “Contrast Limited Adaptive Histogram Equalization (CLAHE) and filtering methods”. Further, the pre-processed imagesare given as input to two classifier models as “Residual Network (ResNet) and Gated Recurrent Unit (GRU)”, in which the model provide the result as normal and abnormal images. In the second part, obtained abnormal image acts an input for segmentation step. In segmentation, it is needed to extract the relevant features by texture and spatial features. The resultant features are subjected for optimizing, where the optimal features are acquired through Adaptive Coyote Optimization Algorithm (ACOA). Then, the extracted features are fed into machine learning model like “Support Vector Machine (SVM), Artificial Neural Network (ANN), and Random Forest (RF)” to render the segmented image. Finally, the hybrid classification named Hybrid ResGRUis developed by integrating the ResNet and GRU, where the hyper parameters are tuned optimally using developed ACOA, thus it is used for classifying the abnormal image that belongs to benign stage or malignant stage. The experimental results are evaluated, and its performance is analyzed by various metrics. Hence, the proposed classification model ensures effective segmentation and classification performance. Show more

Keywords: Brain tumour segmentation and classification, adaptive coyote optimization algorithm, residual network, gated recurrent unit, ensemble machine learning-based tumor segmentation, deep learning-based classification

DOI: 10.3233/JIFS-233546

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Abdus Subhahan, D. | Vinoth Kumar, C.N.S.

Article Type: Research Article

Abstract: The worldwide deforestation rate worsens year after year, ultimately resulting in a variety of severe implications for both mankind and the environment. In order to track the success of forest preservation activities, it is crucial to establish a reliable forest monitoring system. Changes in forest status are extremely difficult to manually annotate due to the tiny size and subtlety of the borders involved, particularly in regions abutting residential areas. Previous forest monitoring systems failed because they relied on low-resolution satellite images and drone-based data, both of which have inherent limitations. Most government organizations still use manual annotation, which is a …slow, laborious, and costly way to keep tabs on data. The purpose of this research is to find a solution to these problems by building a poly-highway forest convolution network using deep learning to automatically detect forest borders so that changes over time may be monitored. Here initially the data was curated using the dynamic decomposed kalman filter. Then the data can be augmented. Afterward the augmented image features can be fused using the multimodal discriminant centroid feature clustering. Then the selected area can be segmented using the iterative initial seeded algorithm (IISA). Finally, the level and the driver of deforestation can be classified using the poly-highway forest convolution network (PHFCN). The whole experimentation was carried out in a dataset of 6048 Landsat-8 satellite sub-images under MATLAB environment. From the result obtained the suggested methodology express satisfied performance than other existing mechanisms. Show more

Keywords: Deforestation, dynamic decomposed kalman filter, multimodal discriminant centroid feature clustering, iterative initial seeded algorithm, poly-highway forest convolution network

DOI: 10.3233/JIFS-233534

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Agrawal, Monika | Moparthi, Nageswara Rao

Article Type: Research Article

Abstract: Sentiment analysis (SA)at the sentence, aspect, and document levels determines the sentiment of particular aspect phrases in a given sentence. Due to their capacity to extract sentiment information from text in aspect-level sentiment classification, neural networks (NNs) have achieved significant success. Generally speaking, sufficiently sizable training corpora are necessary for NNs to be effective. The performance of NN-based systems is reduced by the small size of the aspect-level corpora currently available. In this research, we suggest a gated bilateral recurrent neural network (G-Bi-RNN) as a foundation for multi-source data fusion, their system offers sentiment information that several sources. We develop …a uniform architecture specifically to include information from sentimental lexicons, including aspect- and sentence-level corpora. To further provide aspect-specific phrase representations for SA, we use G-Bi-RNN, a deep bilateral Transformer-based pre-trained language model. We assess our methods using SemEval 2014 datasets for laptops and restaurants. According to experimental findings, our method consistently outperforms cutting-edge techniques on all datasets. We use a number of well-known aspect-level SA datasets to assess the efficacy of our model. Experiments show that when compared to baseline models, the suggested model can produce state-of-the-art results. Show more

Keywords: Sentiment analysis (SA), gated bilateral recurrent neural network (G-Bi-RNN), language model

DOI: 10.3233/JIFS-234076

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2023

Authors: Pughazendi, N. | Valarmathi, K. | Rajaraman, P.V. | Balaji, S.

Article Type: Research Article

Abstract: Internet of Things (IoT) devices installed in hospital direct data unceasingly; in this manner, energy usage augments with the number of broadcasts too. In this paper, Reliable Cluster based Data Collection Framework (RCDCF) for IoT-Big Data Healthcare Applications (HA) is developed. During clustering process, the connected IoT devices are grouped into clusters. In clustering technique, the available IoT devices are gathered into groups. The device with high battery capacity and processing ability is selected as a cluster head (CH). Each member of the cluster is allocated multiple slots by applying a general function pooled by the Fog node and the …entire devices. To perceive and eliminate outliers from the sensor data, Density-based spatial clustering of applications with noise (DBSCAN) method is utilized. To forecast the objective and subjective behaviours of the equipments, a Random Forest Deep Neural Network (RF-DNN) based classification model is utilized. By experimental results, it has been shown that RCDCF achieves 19% and 20% reduced energy consumption at Cloud and Fog centers, respectively. Moreover, RCDCF has 2.1% and 1.3% increased correctness of data at Cloud and Fog data centers, respectively, when compared to the existing framework. Show more

Keywords: Internet of Things (IoT), big data, cloud, clustering, health care solution, slot allocation, Random Forest Deep Neural Network (RF-DNN), categorization

DOI: 10.3233/JIFS-233505

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2023

Authors: Subburaj, S. | Murugavalli, S. | Muthusenthil, B.

Article Type: Research Article

Abstract: SLR, which assists hearing-impaired people to communicate with other persons by sign language, is considered as a promising method. However, as the features of some of the static SL could be the same as the feature in a single frame of dynamic Isolated Sign Language (ISL), the generation of accurate text corresponding to the SL is necessary during the SLR. Therefore, Edge-directed Interpolation-based Recurrent Neural Network (EI-RNN)-centered text generation with varied features of the static and dynamic Isolated SL is proposed in this article. Primarily, ISL videos are converted to frames and pre-processed with key frame extraction and illumination control. …After that, the foreground is separated with the Symmetric Normalised Laplacian-centered Otsu Thresholding (SLOT) technique for finding accurate key points in the human pose. The human pose’s key points are extracted with the Media Pipeline Holistic (MPH) pipeline approach and to improve the features of the face and hand sign, the resultant frame is fused with the depth image. After that, to differentiate the static and dynamic actions, the action change in the fused frames is determined with a correlation matrix. After that, to engender the output text for the respective SL, features are extracted individually as of the static and dynamic frames. It is obtained from the analysis that when analogized to the prevailing models, the proposed EI-RNN’s translation accuracy is elevated by 2.05% in INCLUDE 50 Indian SL based Dataset and Top 1 Accuracy 2.44% and Top 10 accuracy, 1.71% improved in WLASL 100 American SL. Show more

Keywords: Isolated Sign Language (ISL), Sign Language Recognition (SLR), Edge directed Interpolation based Recurrent Neural Network (EIRNN), text generation, word level sign language, Media Pipeline Holistic (MPH)

DOI: 10.3233/JIFS-233610

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2023

Authors: Prasath, N. | Arun, A. | Saravanan, B. | Kamaraj, Kanagaraj

Article Type: Research Article

Abstract: Intelligent Fuzzy Edge Computing (IFEC) has emerged as an innovative technology to enable real-time decision-making in Internet of Things (IoT)-based Digital Twin environments. Digital Twins provide virtual models of physical systems, facilitating predictive maintenance and optimization. However, implementing real-time decision-making in these environments is challenging due to massive data volumes and need for quick response times. IFEC addresses this by offering a flexible, scalable and efficient platform for real-time decision-making. This paper presents an overview of key aspects of IFEC including fuzzy logic, edge computing and Digital Twins. The use of fuzzy logic in IFEC provides an adaptive framework for …handling uncertainties in data. Edge computing enables localized processing, reducing latency. The integration of Digital Twins allows system monitoring, analysis and optimization. Potential applications of IFEC are highlighted in domains such as manufacturing, healthcare, energy management and transportation. Recent advancements in IFEC are also discussed, covering new fuzzy inference systems, edge computing architectures, Digital Twin modeling techniques and security mechanisms. Overall, IFEC shows great promise in enabling real-time decision-making in complex IoT-based Digital Twin environments across various industries. Further research on IFEC will facilitate the ongoing digital transformation of industrial systems. Show more

Keywords: Intelligent fuzzy edge computing, real-time decision making, IoT-based digital twins, predictive maintenance, fuzzy logic, edge computing

DOI: 10.3233/JIFS-233495

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2023

Authors: Vishnukumar, Ravula | Ramaiah, Mangayarkarasi

Article Type: Research Article

Abstract: The Internet’s evolution resulted in a massive amount of data. As a result, the internet has become more sophisticated and vulnerable to massive attacks. The attack detection system is a key feature for system security in modern networks. The IDS might be signature-based or detect anomalous behavior. Researchers recently created several detection algorithms for identifying network intrusions in vehicular network security, but they failed to detect intrusions effectively. For this reason, the optimal Deep Learning approach, namely Political Fractional Dingo Optimizer (PFDOX)-based Deep belief network is introduced for attack detection in network security for vehicles. The Internet of Vehicle simulation …is done initially, and then the input data is passed into the pre-processing phase, which removes noise present in the data. Then, the feature extraction module receives the pre-processed data. The Deep Maxout Network is trained using the Fractional Dingo optimizer (FDOX)is utilized to detect normal and abnormal behavior. Fractional calculus and Dingo optimizer (DOX) are combined to create the proposed FDOX. Finally, intruder/attack types are classified using the Deep Belief Network, which is tuned using the PFDOX. The PFDOX is created by the assimilation of the DOX, Fractional Calculus, and Political Optimizer (PO). The experimental result shows that the designed PFDOX_DBN for attack type classification offers a better result based on f-measure, precision, and recall with the values of 0.924, 0.916, and 0.932, for the CIC-IDS2017 dataset. Show more

Keywords: Deep maxout network, intrusion detection, deep belief network, dingo optimizer, fractional calculus, political optimizer

DOI: 10.3233/JIFS-233581

Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2023