Journal of Intelligent & Fuzzy Systems - Volume 39, issue 5

Authors: Riaz, Muhammad | Naeem, Khalid | Aslam, Muhammad | Afzal, Deeba | Almahdi, Fuad Ali Ahmed | Jamal, Sajjad Shaukat

Article Type: Research Article

Abstract: Pythagorean fuzzy set (PFS) introduced by Yager (2013) is the extension of intuitionistic fuzzy set (IFS) introduced by Atanassov (1983). PFS is also known as IFS of type-2. Pythagorean fuzzy soft set (PFSS), introduced by Peng et al. (2015) and later studied by Guleria and Bajaj (2019) and Naeem et al. (2019), are very helpful in representing vague information that occurs in real world circumstances. In this article, we introduce the notion of Pythagorean fuzzy soft topology (PFS-topology) defined on Pythagorean fuzzy soft set (PFSS). We define PFS-basis, PFS-subspace, PFS-interior, PFS-closure and boundary of PFSS. We introduce Pythagorean fuzzy soft …separation axioms, Pythagorean fuzzy soft regular and normal spaces. Furthermore, we present an application of PFSSs to multiple criteria group decision making (MCGDM) using choice value method in the real world problems which yields the optimum results for investment in the stock exchange. We also render an application of PFS-topology in medical diagnosis using TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution). The applications are accompanied by Algorithms, flow charts and statistical diagrams. Show more

Keywords: PFS-topology, stock exchange investment, choice value method, medical diagnosis, TOPSIS

DOI: 10.3233/JIFS-190854

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6703-6720, 2020

Authors: Wu, Nannan | Xu, Yejun | Xu, Lizhong | Wang, Huimin

Article Type: Research Article

Abstract: Conflict of environmental sustainable development as a common phenomenon can be seen everywhere in life. To capture consensus problems of decision makers (DMs) in conflict, a consensus and non-consensus fuzzy preference relation (FPR) matrix is proposed to the framework of the Graph Model for Conflict Resolution (GMCR). Concentrating on the case of two DMs within GMCR paradigm, four standard fuzzy solution concepts are developed into eight fuzzy stability definitions which can fully represent DMs’ behavior characteristics of win-win and self-interested. To demonstrate how the novel GMCR methodology proposed in this paper can be conveniently utilized in practice, it is then …applied to an environmental sustainable development conflict with two DMs. The results show that the general fuzzy equilibrium solutions are the intersection of consensus fuzzy equilibrium and non-consensus fuzzy equilibrium. Therefore, the GMCR technique considering DMs’ consensus can effectively predict the various possible solutions of conflict development under different DMs’ behavior preferences and provide new insights for analysts into a conflict. Show more

Keywords: Graph model for conflict resolution, consensus, fuzzy preferences, sustainable development

DOI: 10.3233/JIFS-190990

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6721-6731, 2020

Authors: Zhang, Zeliang

Article Type: Research Article

Abstract: Artificial intelligence technology has been applied very well in big data analysis such as data classification. In this paper, the application of the support vector machine (SVM) method from machine learning in the problem of multi-classification was analyzed. In order to improve the classification performance, an improved one-to-one SVM multi-classification method was creatively designed by combining SVM with the K-nearest neighbor (KNN) method. Then the method was tested using UCI public data set, Statlog statistical data set and actual data. The results showed that the overall classification accuracy of the one-to-many SVM, one-to-one SVM and improved one-to-one SVM were 72.5%, …77.25% and 91.5% respectively in the classification of UCI publication data set and Statlog statistical data set, and the total classification accuracy of the neural network, decision tree, basic one-to-one SVM, directed acyclic graph improved one-to-one SVM and fuzzy decision method improved one-to-one SVM and improved one-to-one SVM proposed in this study was 83.98%, 84.55%, 74.07%, 81.5%, 82.68% and 92.9% respectively in the classification of fault data of transformer, which demonstrated the improved one-to-one SVM had good reliability. This study provides some theoretical bases for the application of methods such as machine learning in big data analysis. Show more

Keywords: Machine learning, big data, artificial intelligence, support vector machine, data classification

DOI: 10.3233/JIFS-191265

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6733-6740, 2020

Authors: Liu, Zhimin | Qu, Shaojian | Wu, Zhong | Ji, Ying

Article Type: Research Article

Abstract: The problem of the optimal three-level location allocation of transfer center, processing factory and distribution center for supply chain network under uncertain transportation cost and customer demand are studied. We establish a two-stage fuzzy 0-1 mixed integer optimization model, by considering the uncertainty of the supply chain. Given the complexity of the model, this paper proposes a modified hybrid second order particle swarm optimization algorithm (MHSO-PSO) to solve the resulting model, yielding the optimal location and maximal expected return of supply chain simultaneously. A case study of clothing supply chain in Shanghai of China is then presented to investigate the …specific influence of uncertainties on the transfer center, clothing factory and distribution center three-level location. Moreover, we compare the MHSO-PSO with hybrid particle swarm optimization algorithm and hybrid genetic algorithm, to validate the proposed algorithm based on the computational time and the convergence rate. Show more

Keywords: Two-stage fuzzy 0-1 mixed integer optimization, three-level location allocation, uncertainty, algorithm

DOI: 10.3233/JIFS-191453

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6741-6756, 2020

Authors: Mu, Yashuang | Wang, Lidong | Liu, Xiaodong

Article Type: Research Article

Abstract: Fuzzy decision trees are one of the most popular extensions of decision trees for symbolic knowledge acquisition by fuzzy representation. Among the majority of fuzzy decision trees learning methods, the number of fuzzy partitions is given in advance, that is, there are the same amount of fuzzy items utilized in each condition attribute. In this study, a dynamic programming-based partition criterion for fuzzy items is designed in the framework of fuzzy decision tree induction. The proposed criterion applies an improved dynamic programming algorithm used in scheduling problems to establish an optimal number of fuzzy items for each condition attribute. Then, …based on these fuzzy partitions, a fuzzy decision tree is constructed in a top-down recursive way. A comparative analysis using several traditional decision trees verify the feasibility of the proposed dynamic programming based fuzzy partition criterion. Furthermore, under the same framework of fuzzy decision trees, the proposed fuzzy partition solution can obtain a higher classification accuracy than some cases with the same amount of fuzzy items. Show more

Keywords: Fuzzy decision trees, Fuzzy partition, Dynamic programming, Fuzzy items

DOI: 10.3233/JIFS-191497

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6757-6772, 2020

Authors: Thakran, Snekha

Article Type: Research Article

Abstract: The Electrocardiogram (ECG) signal records the electrical activity of the heart. It is very difficult for physicians to analyze the ECG signal if noise is embedded during acquisition to inspect the heart’s condition. The denoising of electrocardiogram signals based on the genetic particle filter algorithm(GPFA) using fuzzy thresholding and ensemble empirical mode decomposition (EEMD) is proposed in this paper, which efficiently removes noise from the ECG signal. This paper proposes a two-phase scheme for eliminating noise from the ECG signal. In the first phase, the noisy signal is decomposed into a true intrinsic mode function (IMFs) with the help of …EEMD. EEMD is better than EMD because it removes the mode-mixing effect. In the second phase, IMFs which are corrupted by noise is obtained by using spectral flatness of each IMF and fuzzy thresholding. The corrupted IMFs are filtered using a GPF method to remove the noise. Then, the signal is reconstructed with the processed IMFs to get the de-noised ECG. The proposed algorithm is analyzed for a different local hospital database, and it gives better root mean square error and signal to noise ratio than other existing techniques (Wavelet transform (WT), EMD, Particle filter(PF) based method, extreme-point symmetric mode decomposition with Nonlocal Means(ESMD-NLM), and discrete wavelet with Savitzky-Golay(DW-SG) filter). Show more

Keywords: Genetic particle filter algorithm, ensemble empirical mode decomposition, fuzzy thresholding, ECG denoising

DOI: 10.3233/JIFS-191518

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6773-6782, 2020

Authors: Subbiah, Siva Sankari | Chinnappan, Jayakumar

Article Type: Research Article

Abstract: The load forecasting is the significant task carried out by the electricity providing utility companies for estimating the future electricity load. The proper planning, scheduling, functioning, and maintenance of the power system rely on the accurate forecasting of the electricity load. In this paper, the clustering-based filter feature selection is proposed for assisting the forecasting models in improving the short term load forecasting performance. The Recurrent Neural Network based Long Short Term Memory (LSTM) is developed for forecasting the short term load and compared against Multilayer Perceptron (MLP), Radial Basis Function (RBF), Support Vector Regression (SVR) and Random Forest (RF). …The performance of the forecasting model is improved by reducing the curse of dimensionality using filter feature selection such as Fast Correlation Based Filter (FCBF), Mutual Information (MI), and RReliefF. The clustering is utilized to group the similar load patterns and eliminate the outliers. The feature selection identifies the relevant features related to the load by taking samples from each cluster. To show the generality, the proposed model is experimented by using two different datasets from European countries. The result shows that the forecasting models with selected features produce better performance especially the LSTM with RReliefF outperformed other models. Show more

Keywords: Load forecasting, feature selection, clustering, deep learning, long short term memory

DOI: 10.3233/JIFS-191568

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6783-6800, 2020

Authors: Kejia, Shen | Parvin, Hamid | Qasem, Sultan Noman | Tuan, Bui Anh | Pho, Kim-Hung

Article Type: Research Article

Abstract: Intrusion Detection Systems (IDS) are designed to provide security into computer networks. Different classification models such as Support Vector Machine (SVM) has been successfully applied on the network data. Meanwhile, the extension or improvement of the current models using prototype selection simultaneous with their training phase is crucial due to the serious inefficacies during training (i.e. learning overhead). This paper introduces an improved model for prototype selection. Applying proposed prototype selection along with SVM classification model increases attack discovery rate. In this article, we use fuzzy rough sets theory (FRST) for prototype selection to enhance SVM in intrusion detection. Testing …and evaluation of the proposed IDS have been mainly performed on NSL-KDD dataset as a refined version of KDD-CUP99. Experimentations indicate that the proposed IDS outperforms the basic and simple IDSs and modern IDSs in terms of precision, recall, and accuracy rate. Show more

Keywords: SVM, data selection, feature selection, fuzzy rough set theory, ids

DOI: 10.3233/JIFS-191621

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6801-6817, 2020

Authors: Lei, Fan | Wei, Guiwu | Wu, Jiang | Wei, Cun | Guo, Yanfeng

Article Type: Research Article

Abstract: Probabilistic uncertain linguistic sets (PULTSs) have extensively been employed in multiple attribute group decision making (MAGDM)problem. The QUALIFLEX method, which is relatively a novel MAGDM technique, aims to obtain the optimal alternative. This paper proposes the probabilistic uncertain linguistic QUALIFLEX (PUL-QUALIFLEX) method with CRITIC method. To show the effectiveness of the designed method, an application is given for green supplier selection and the derived results are compared with some existing methods. Thus, the advantage of this proposed method is that it is simple to understand and easy to compute. The proposed method can also contribute to the selection of suitable …alternative successfully in other selection issues. Show more

Keywords: Multiple attribute group decision making (MAGDM), probabilistic uncertain linguistic term sets (PULTSs), CRITIC method, QUALIFLEX method, green supplier selection

DOI: 10.3233/JIFS-191737

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6819-6831, 2020

Authors: Ye, Fei-Fei | Wang, Suhui | Yang, Long-Hao | Wang, Ying-Ming

Article Type: Research Article

Abstract: Air pollution management is becoming a major topic of political concern, and many studies have devoted to the efficiency measurement of air pollution management. However, several drawbacks must be overcome for better applying efficiency measurement to improve air pollution management, including neglect of the importance of different indicators, non-integrity of indicator information for efficiency measurement, and lack of analyzing regional factors in the efficiency of air pollution management. Accordingly, by utilizing the evidential reasoning (ER) approach with entropy weighting method to propose an ER-based indicator integration and introducing the slacks-based measure (SBM) model with consideration of undesirable outputs and the …regression model to propose an SBM-based efficiency analysis, a new air pollution management method, called integrated ER-SBM method, is developed in the present study. In the case study of Chinese 29 provinces, the application procedure and results are provided to illustrate how to apply the integrated ER-SBM method to integrate various air pollution indicators with different importance and further analyze the influence of regional factors, such as technological innovation, regional population density, import-export values, number of industries, and energy resources, on the efficiency of air pollution management. In addition, the policy recommendations targeting the results are concluded as well. Show more

Keywords: Air pollution, indicator integration, efficiency analysis, ER approach, SBM model

DOI: 10.3233/JIFS-191816

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6833-6848, 2020

Authors: Atmaca, S.

Article Type: Research Article

Abstract: In this manuscript, it is aimed to convert the topology on a set X which is on a nearness approximation space to new set families via indiscernibility relation. Then, if the open sets of the present topology are defined as the set of related elements, the set families, which have weakly related elements, will be obtained. Finally, the topological properties and concepts that these new families hold will be examined.

Keywords: Near set, near topology, topology

DOI: 10.3233/JIFS-191922

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6849-6855, 2020

Authors: Adhikary, Krishnendu | Roy, Jagannath | Kar, Samarjit

Article Type: Research Article

Abstract: Due to increasing difficulty and challenging issues of newsboy problem under uncertainty, managers seek newer and appropriate approaches to apprehend more accurately the demand for perishable products and or the products having a short shelf life. This paper investigates a newsboy problem with fuzzy random demand in a single product business scenario. The classical newsboy model is extended to a fuzzy random newsboy problem to determine the optimal order quantity and expected profit under hybrid uncertainty. To solve the proposed model, a new solution approach based on chance constraint programming is proposed to formulate the crisp equivalent form of the …fuzzy random newsboy model. Numerical examples and a real-life case study are presented to show the utility of the projected model. From the outcomes, decision makers can make comprehensive recommendations for the optimal order quantity and expected profit obtained by our proposed model under two-folded uncertainty. Also, a sensitivity analysis suggests that the profit and order quantity will increase (or decrease) with the increase (or decrease) of the mean demand. Show more

Keywords: Newsboy problem, uncertain demand, fuzzy random variable, expected value model

DOI: 10.3233/JIFS-192057

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6857-6868, 2020

Authors: Alsulami, S. H. | Ibedou, Ismail | Abbas, S. E.

Article Type: Research Article

Abstract: In this paper, we join the notion of fuzzy ideal to the notion of fuzzy approximation space to define the notion of fuzzy ideal approximation spaces. We introduce the fuzzy ideal approximation interior operator int Φ λ and the fuzzy ideal approximation closure operator cl Φ λ , and moreover, we define the fuzzy ideal approximation preinterior operator p int Φ λ and the fuzzy ideal approximation preclosure operator p cl Φ λ with respect …to that fuzzy ideal defined on the fuzzy approximation space (X , R ) associated with some fuzzy set λ  ∈ I X . Also, we define fuzzy separation axioms, fuzzy connectedness and fuzzy compactness in fuzzy approximation spaces and in fuzzy ideal approximation spaces as well, and prove the implications in between. Show more

Keywords: Fuzzy rough set, Fuzzy ideal approximation space, Fuzzy separation axioms, Fuzzy connectedness, Fuzzy compactness, 03E72, 03E02, 54C10, 03E20, 54D05, 54D10, 54D30)

DOI: 10.3233/JIFS-192072

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6869-6880, 2020

Authors: Wang, Jie | Yan, Linhuang | Tian, Jiayi | Yuan, Minmin

Article Type: Research Article

Abstract: In this paper, a bilateral spectrogram filtering (BSF)-based optimally modified log-spectral amplitude (OMLSA) estimator for single-channel speech enhancement is proposed, which can significantly improve the performance of OMLSA, especially in highly non-stationary noise environments, by taking advantage of bilateral filtering (BF), a widely used technology in image and visual processing, to preprocess the spectrogram of the noisy speech. BSF is capable of not only sharpening details, removing unwanted textures or background noise from the noisy speech spectrogram, but also preserving edges when considering a speech spectrogram as an image. The a posteriori signal-to-noise ratio (SNR) of OMLSA algorithm is …estimated after applying BSF to the noisy speech. Besides, in order to reduce computing costs, a fast and accurate BF is adopted to reduce the algorithm complexity O (1) for each time-frequency bin. Finally, the proposed algorithm is compared with the original OMLSA and other classic denoising methods using various types of noise with different signal-to-noise ratios in terms of objective evaluation metrics such as segmental signal-to-noise ratio improvement and perceptual evaluation of speech quality. The results show the validity of the improved BSF-based OMLSA algorithm. Show more

Keywords: Speech enhancement, bilateral filtering, optimally modified log-spectral amplitude, bilateral spectrogram filtering, spectrogram

DOI: 10.3233/JIFS-192088

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6881-6889, 2020

Authors: Oketch, Godrick | Karaman, Filiz

Article Type: Research Article

Abstract: Count data models are based on definite counts of events as dependent variables. But there are practical situations in which these counts may fail to be specific and are seen as imprecise. In this paper, an assumption that heaped data points are fuzzy is used as a way of identifying counts that are not definite since heaping can result from imprecisely reported counts. Because it is practically unlikely to report all counts in an entire dataset as imprecise, this paper proposes a likelihood function that not only considers both precise and imprecisely reported counts but also incorporates α  - cuts …of fuzzy numbers with the aim of varying impreciseness of fuzzy reported counts. The proposed model is then illustrated through a smoking cessation study data that attempts to identify factors associated with the number of cigarettes smoked in a month. Through the real data illustration and a simulation study, it is shown that the proposed model performs better in predicting the outcome counts especially when the imprecision of the fuzzy points in a dataset are increased. The results also show that inclusion of α  - cuts makes it possible to identify better models, a feature that was not previously possible. Show more

Keywords: Fuzzy α - cuts, fuzzy count data, fuzzy likelihood function, fuzzy probability, heaped data, poisson regression

DOI: 10.3233/JIFS-192094

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6891-6901, 2020

Authors: Riaz, Muhammad | Hamid, Muhammad Tahir | Athar Farid, Hafiz Muhammad | Afzal, Deeba

Article Type: Research Article

Abstract: In this article, we study some concepts related to q-rung orthopair fuzzy soft sets (q-ROFSSs) together with their algebraic structure. We present operations on q-ROFSSs and their specific properties and elaborate them with real-life examples and tabular representations to develop an influx of linguistic variables based on q-rung orthopair fuzzy soft (q-ROFS) information. We present an application of q-ROFSSs to multi-criteria group decision-making (MCGDM) process related to the university choice, accompanied by algorithm and flowchart. We develop q-ROFS TOPSIS method and q-ROFS VIKOR method as extensions of TOPSIS (a technique for ordering preference through the ideal solution) and VIKOR (Vlse …Kriterijumska Optimizacija Kompromisno Resenje), respectively. Finally, we tackle a problem of construction utilizing q-ROFS TOPSIS and q-ROFS VIKOR methods. Show more

Keywords: q-ROFNs, TOPSIS, aggregation operators, VIKOR, soft sets

DOI: 10.3233/JIFS-192175

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6903-6917, 2020

Authors: Guo, Xingru | Liu, Aijun | Li, Xia | Liu, Taoning

Article Type: Research Article

Abstract: Rh-negative rare blood inventory protection plays an important role in emergency blood protection. Normally, hospitals typically hold a fixed amount of daily reserve in response to emergency needs, but the measure can increase the unnecessary cost of repeated freezing and thawing. In order to save manpower, protect blood resources and reduce costs, a two-stage stochastic model is proposed to determine the optimal daily reserve of Rh-negative red blood cells, taking into account the uncertainty of demand. First, the model focuses on minimizing operational cost, shortage cost and damage caused by blood substitution. Then, the proposed model generates a series of …discrete scenarios to solve the uncertainty of demand and predict the demand. In addition, a case study is presented to prove the validity of the proposed model with real data. Sensitivity analysis is also established to observe the effect of parameter changes on the results. Finally, the results show that the proposed model can effectively reduce the cost and current waste. Show more

Keywords: Rh-negative, red blood cells, inventory management, stochastic demand, two-stage stochastic model

DOI: 10.3233/JIFS-192182

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6919-6933, 2020

Authors: Lee, Chang-Yong

Article Type: Research Article

Abstract: Under a flexible mass-production system, a manufacturer may need to provide highly customized products to meet customer satisfaction. It is likely that components in a customized product are correlated in such a way that the demands of some components depend on those of others. In order to cope with dependence in the demands, we proposed a continuous review multi-item inventory (Q , r ) model that included a general form of correlation and dependence in demands among components. We represented the proposed model by using a probabilistic graphical model under the assumption that the demands of all components and their …correlations were represented by a multivariate Gaussian probability distribution. By taking an advantage of a directed acyclic graph and its topological order, we demonstrated that the correlated demands among components in the proposed model could be solved without any approximation and assumption. As an illustration of the proposed method, we solved an inventory (Q , r ) model of eight correlated components and discussed the experimental results in terms of correlation and dependence in demand. Show more

Keywords: Inventory, continuous review multi-item inventory, directed acyclic graph, topological order, correlation and dependence

DOI: 10.3233/JIFS-200014

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6935-6947, 2020

Authors: Barlak, Damla

Article Type: Research Article

Abstract: In this study, we introduce the concepts of φ λ ,μ -double statistically convergence of order β in fuzzy sequences and strongly λ - double Cesaro summable of order β for sequences of fuzzy numbers. Also we give some inclusion theorems.

Keywords: Statistical convergence, Cesàro summability, Modulus function, 40A05, 40A25, 40A30, 40C05, 03E72

DOI: 10.3233/JIFS-200039

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6949-6954, 2020

Authors: Zhang, Nian | Han, Yunpeng | Si, Quanshen | Wei, Guiwu

Article Type: Research Article

Abstract: To consider the decision makers’ regret behavior and describe the hybrid evolution information in the risk decision-making problem, a new approach is proposed based on regret theory in this paper. Firstly, the probable value of different states are calculated by Pignistic probability transformation method. Secondly, the relative closeness formula of hybrid information are established and the utility values of alternatives are computed. Then, decision makers’ utility values are obtained according to the regret theory. Moreover, the overall perceived utility values of alternatives are obtained by weighted arithmetic mean and got the optimal one by the ranking order. Finally, an numerical …example is illustrated the method and comparative analysis are offered between the proposed approach and other existed methods to show that is feasible and usable. Show more

Keywords: Regret theory, hybrid information, multi-attribute risk decision-making

DOI: 10.3233/JIFS-200081

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6955-6964, 2020

Authors: Zhang, Xianquan | Yang, Ju | Dong, Yu | Yu, Chunqiang | Tang, Zhenjun

Article Type: Research Article

Abstract: Most data hiding methods have limitations in resisting cropping and noise attacks. Aiming at this problem, a robust data hiding with multiple backups and optimized reference matrix is proposed in this paper. Specifically, secret data is divided into a set of groups and multiple backups of each group data are generated according to the number of backups. The cover image is divided into several blocks. A reference matrix is constructed by four constraints to assist data hiding and data extraction. The proposed method aims to extract exactly at least one backup of each group data so that the correct backups …can construct the secret data well if the stego-image is corrupted. Experimental results show that the proposed algorithm is robust to cropping and noise attacks. Show more

Keywords: Data hiding, anti-cropping, anti-noise, multi-backup data, data security

DOI: 10.3233/JIFS-200089

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6965-6977, 2020

Authors: El Atik, Abd El Fattah A. | wahba, Ashgan S.

Article Type: Research Article

Abstract: Rough set theory is used in simple directed graphs to study nano topology. Adjacent vertices was used in digraphs only to define their neighborhoods. Four types of neighborhood systems for vertices are introduced in this article which depend on both adjacent vertices and associated edges. Additionally, the generalization of some notions presented by Pawlak and Lellis Thivagar and some of their properties are investigated. Finally, we present a new model of a blood circulation system of the human heart based on blood paths. Also, different kinds of topological separation axioms are presented and studied between vertices and edges of the …heart blood circulation model. Show more

Keywords: Graph theory, Rough sets, Nano topology, Human heart, Separation axioms

DOI: 10.3233/JIFS-200126

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6979-6992, 2020

Authors: Han, Lu | Su, Zhi | Lin, Jing

Article Type: Research Article

Abstract: Ever increasing ordinal variables are being collected by the Personal Credit Reference System in China, however this system suffers from analysis of this kind of data, which cannot be calculated by Euclidean distance. In this study, we put forward a hybrid KNN algorithm based on Sugeno measure, and we prove that the error of this algorithm is smaller than that of Euclidean distance, furthermore, we use real data obtained from the Personal Credit Reference System to perform experiments and get the user’s initial portrait. Through the comparisons with Kmeans algorithm and other different distance measures in KNN algorithm, we find …that the hybrid KNN algorithm is more suitable for clustering personal credit data. Show more

Keywords: Hybrid KNN clustering, personal credit reference system, Sugeno measure, user’s portrait

DOI: 10.3233/JIFS-200191

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6993-7004, 2020

Authors: Zhu, Zhanlong | Liu, Yongjun | Wang, Yuan

Article Type: Research Article

Abstract: Adding spatial penalty to fuzzy C-means (FCM) model is an important way to reduce the influence of noise in image segmentation. However, these improved algorithms easily cause segmentation failures when the image has the characteristics of unequal cluster sizes. Besides, they often fall into local optimal solutions if the initial cluster centers are improper. This paper presents a noise robust hybrid algorithm for segmenting image with unequal cluster sizes based on chaotic crow search algorithm and improved fuzzy c-means to overcome the above defects. Firstly, each size of clusters is integrated into the objective function of noise detecting fuzzy c-means …algorithm (NDFCM), which can reduces the contribution of larger clusters to objective function and then the new membership degree and cluster centers are deduced. Secondly, a new expression called compactness, representing the pixel distribution of each cluster, is introduced into the iteration process of clustering. Thirdly, we use two- paths to seek the optimal solutions in each step of iteration: one path is produced by the chaotic crow search algorithm and the other is originated by gradient method. Furthermore, the better solutions of the two-paths go to next generation until the end of the iteration. Finally, the experiments on the synthetic and non–destructive testing (NDT) images show that the proposed algorithm behaves well in noise robustness and segmentation performance. Show more

Keywords: Image segmentation, fuzzy clustering, chaotic crow search algorithm, unequal cluster sizes

DOI: 10.3233/JIFS-200197

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7005-7020, 2020

Authors: Li, Feng

Article Type: Research Article

Abstract: Mining maximal frequent patterns is significant in many fields, but the mining efficiency is often low. The bottleneck lies in too many candidate subgraphs and extensive subgraph isomorphism tests. In this paper we propose an efficient mining algorithm. There are two key ideas behind the proposed methods. The first is to divide each edge of every certain graph (converted from equivalent uncertain graph) and build search tree, avoiding too many candidate subgraphs. The second is to search the tree built in the first step in order, avoiding extensive subgraph isomorphism tests. The evaluation of our approach demonstrates the significant cost …savings with respect to the state-of-the-art approach not only on the real-world datasets as well as on synthetic uncertain graph databases. Show more

Keywords: Uncertain graph, maximal frequent pattern, data mining

DOI: 10.3233/JIFS-200237

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7021-7033, 2020

Authors: Parsa, Navid | Bahmani-Firouzi, Bahman | Niknam, Taher

Article Type: Research Article

Abstract: Distribution automation is well recognized as an effective solution to enhance the reliability and efficiency of these grids in a timely manner. This paper introduces an effective probabilistic operation framework for the automated distribution networks (ADNs) incorporating the plug-in electric vehicles (PEVs) charging/discharging schemes in the presence of different renewable energy sources (RESs). To this end, this paper pursues four different strategic approaches. Firstly, an effective fuzzy based probabilistic method is proposed to model the forecast error in the wind and solar units well as the load demand through the cloud theory. Secondly, an appropriate framework is devised to model …the PEVs random behaviour considering their essential parameters such as the charging/discharging rate and arrival/departure time to/from the parking lots (PLs), the discharging level at driving mode on the road and the effects of battery degradation. As the third goal, an appropriate objective function which can consider automation indices including the social welfare and reliability is considered. Since the operation problem is a nonlinear continuous non-numerical problem, it requires an applicable and effective optimization algorithm which is regarded as the fourth goal of this paper. In this regard, a new θ -modified bat algorithm is introduced to find the optimal solution of the problem. The proposed model is simulated and examined on the IEEE 69-bus standard test system wherein results reveal the effectiveness and applicability of the proposed operation management framework. Show more

Keywords: Automated distribution networks, reliability, electric vehicles, renewable energy sources, optimization and operation management

DOI: 10.3233/JIFS-200246

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7035-7051, 2020

Authors: Saini, Jagriti | Dutta, Maitreyee | Marques, Gonçalo

Article Type: Research Article

Abstract: Indoor air pollution (IAP) has become a serious concern for developing countries around the world. As human beings spend most of their time indoors, pollution exposure causes a significant impact on their health and well-being. Long term exposure to particulate matter (PM) leads to the risk of chronic health issues such as respiratory disease, lung cancer, cardiovascular disease. In India, around 200 million people use fuel for cooking and heating needs; out of which 0.4% use biogas; 0.1% electricity; 1.5% lignite, coal or charcoal; 2.9% kerosene; 8.9% cow dung cake; 28.6% liquified petroleum gas and 49% use firewood. Almost 70% …of the Indian population lives in rural areas, and 80% of those households rely on biomass fuels for routine needs. With 1.3 million deaths per year, poor air quality is the second largest killer in India. Forecasting of indoor air quality (IAQ) can guide building occupants to take prompt actions for ventilation and management on useful time. This paper proposes prediction of IAQ using Keras optimizers and compares their prediction performance. The model is trained using real-time data collected from a cafeteria in the Chandigarh city using IoT sensor network. The main contribution of this paper is to provide a comparative study on the implementation of seven Keras Optimizers for IAQ prediction. The results show that SGD optimizer outperforms other optimizers to ensure adequate and reliable predictions with mean square error = 0.19, mean absolute error = 0.34, root mean square error = 0.43, R2 score = 0.999555, mean absolute percentage error = 1.21665%, and accuracy = 98.87%. Show more

Keywords: Indoor air quality, pollutants, prediction system, optimizers

DOI: 10.3233/JIFS-200259

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7053-7069, 2020

Authors: Zhao, Ruirui | Luo, Minxia | Li, Shenggang

Article Type: Research Article

Abstract: The theory of single valued neutrosophic sets, which is a generalization of intuitionistic fuzzy sets, is more capable of dealing with inconsistent information in practice. In this paper, we propose reverse triple I method under single valued neutrosophic environment. Firstly, we give the definitions of single valued neutrosophic t-representation t-norms and single valued neutrosophic residual implications. Secondly, we develop a formula for calculating single valued neutrosophic residual implications. Then we propose reverse triple I method based on left-continuous single valued neutrosophic t-representation t-norms and its solutions. Lastly, we discuss the robustness of reverse triple I method based on the proposed …similarity measure. Show more

Keywords: Single valued neutrosophic sets, similarity measure, reverse triple I method

DOI: 10.3233/JIFS-200265

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7071-7083, 2020

Authors: Liu, Shuqi | Shao, Mingwen | Liu, Xinping

Article Type: Research Article

Abstract: In recent years, deep neural networks have made significant progress in image classification, object detection and face recognition. However, they still have the problem of misclassification when facing adversarial examples. In order to address security issue and improve the robustness of the neural network, we propose a novel defense network based on generative adversarial network (GAN). The distribution of clean - and adversarial examples are matched to solve the mentioned problem. This guides the network to remove invisible noise accurately, and restore the adversarial example to a clean example to achieve the effect of defense. In addition, in order to …maintain the classification accuracy of clean examples and improve the fidelity of neural network, we input clean examples into proposed network for denoising. Our method can effectively remove the noise of the adversarial examples, so that the denoised adversarial examples can be correctly classified. In this paper, extensive experiments are conducted on five benchmark datasets, namely MNIST, Fashion-MNIST, CIFAR10, CIFAR100 and ImageNet. Moreover, six mainstream attack methods are adopted to test the robustness of our defense method including FGSM, PGD, MIM, JSMA, CW and Deep-Fool. Results show that our method has strong defensive capabilities against the tested attack methods, which confirms the effectiveness of the proposed method. Show more

Keywords: Deep neural network, generative adversarial network, adversarial example, defense

DOI: 10.3233/JIFS-200280

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7085-7095, 2020

Authors: Nasr Saleh, Hayel | Imdad, Mohammad | Khan, Idrees | Hasanuzzaman, Md

Article Type: Research Article

Abstract: In the present article, inspired by the work of Jleli et al. [J. Inequal. Appl. 2014, 38 (2014)] and [J. Inequal. Appl. 2014, 439 (2014)] in metric spaces, we proposed a new class of contractive mappings termed as: fuzzy Θ f -contractive mappings by using an auxiliary function Θ f  : (0, 1) → (0, 1) satisfying suitable properties. This class has further been weakened by defining the class of fuzzy Θ f -weak contractive mappings to realize yet another class of contractive mappings. Thereafter, these two newly introduced classes of contractive mappings are utilized to establish some fixed point …theorems in M -complete fuzzy metric spaces (in the sense of George and Veeramani). In support of our newly obtained results, we provide some examples besides furnishing applications to dynamic programming. Show more

Keywords: Fixed point, fuzzy Θf-contractive mappings, fuzzy Θf-weak contractive mappings, fuzzy metric space, dynamic programming

DOI: 10.3233/JIFS-200319

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7097-7106, 2020

Authors: Chuanchao, Zhang

Article Type: Research Article

Abstract: In view of the characteristics with big data, high feature dimension, and dynamic for a large-scale intuitionistic fuzzy information systems, this paper integrates intuitionistic fuzzy rough sets and generalized dynamic sampling theory, proposes a generalized attribute reduction algorithm based on similarity relation of intuitionistic fuzzy rough sets and dynamic reduction. It uses dynamic reduction sampling theory to divide a big data set into small data sets and relative positive domain cardinality instead of dependency degree as decision-making condition, and obtains reduction attributes of big intuitionistic fuzzy decision information systems, and achieves the goal of extracting key features and fault diagnosis. …The innovation of this paper is that it integrates generalized dynamic reduction and intuitionistic fuzzy rough set, and solves the problem of big data set which cannot be solved by intuitionistic fuzzy rough set. Taking an actual data as an example, the scientificity, rationality and effectiveness of the algorithm are verified from the aspects of stability, diagnostic accuracy, optimization ability and time complexity. Compared with similar algorithms, the advantages of the proposed algorithm for big data processing are confirmed. Show more

Keywords: Intuitionistic fuzzy rough set, similarity relation, relative positive domain, generalized dynamic reduction, large fuzzy decision information system, attribute reduction

DOI: 10.3233/JIFS-200347

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7107-7122, 2020

Authors: Maryum, Ilsa | Nawaz, Waqas | Ud Din, Amad

Article Type: Research Article

Abstract: Non-uniformity in medical procedures, expensive medical treatments, and the shortage of medicines in different areas are health care problems in our country. This paper aims to resolve that problem by developing a web-based-application called Hospital Management Society (HMS) based on a novel Dynamic Optimized Fuzzy C-mean Clustering and Association Rule Mining (DOFCCARM). The purpose of HMS is to enhance the hospitals (and clinics) by regulating, overseeing and accrediting them to bring uniformity in health care facilities, to make the medical treatment cost effective, to find common diseases in a particular age and area, and to help government in identifying the …areas facing the shortage of licensed medicines. Therefore, HMS creates a single platform for both the doctors of central hospital (CH) and the doctors of member hospitals (MH). The CH provides clinical practice guidelines for various diseases. A team of doctors at CH evaluate the medical treatment provided by MH. If a hospital fails to maintain the standard then HMS blacklists such hospital. In our approach, we take a range of values to distinct successive partitions and generate a parallel membership function to make fuzzy sets of patients report, rather than single partitioning point. We determine the effectiveness of our approach through experiments on a dataset. The results revealed the most common age, symptoms and location for a particular disease and shortage of particular medicine in a specific area. Show more

Keywords: Fuzzy C-mean, association rule mining, hospital management society, intelligent system

DOI: 10.3233/JIFS-200349

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7123-7134, 2020

Authors: Li, Shugang | Zhu, Lirong | Zhu, Boyi | Wang, Ru | Zheng, Lingling | Yu, Zhaoxu | Lu, Hanyu

Article Type: Research Article

Abstract: 3D printing is the important part of the emerging industry, and the accurate prediction of technology hot spots (THS) in the 3D printing industry is crucial for the strategic technology planning. The patents of the THS are always in the minority and have outlier characteristics, so the existing single and rigid models cannot accurately and robustly predict the THS. In order to make up for the shortcomings of the existing research, this study proposes a model for robust composite attraction indicator (MRCAI), which avoids the impact of outlier patents on prediction accuracy depending on not only extracting the patent attraction …indicators (AIs) but also constructing the robust composite attraction indicator (CAI) according to the rough consensus of predicted results of CAIs with high generalization. Specifically, firstly, this study selects the patent AIs from the four dimensions of the attraction: technology group attraction, state attraction, enterprise attraction and inventor attraction. Secondly, in order to completely describe the attraction features of patent, AIs are directly and indirectly integrated into CAIs. Thirdly, we reduce the influence of outlier patents on prediction accuracy from two aspects: on the one hand, we initially select the CAIs with good generalization performance based on the prediction error fluctuation range. On the other hand, we build the robust CAIs by calculating the consensus of CAIs with high generalization performance based on the rough set. Fourthly, the 3D printing industry technology attention matrix is constructed to map the effective technology strategic planning based on predicted patent backward citation count by MRCAI in the short, medium and long term. Finally, the experimental results on 3D printing patent data show that MRCAI can effectively improve the efficiency in dealing with samples with outlier patents and has strong flexibility and robustness in predicting the THS in 3D printing industry. Show more

Keywords: Technology hot spots, outlier samples, robust CAI, 3D printing, technology attention matrix

DOI: 10.3233/JIFS-200404

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7135-7149, 2020

Authors: Lio, Waichon | Jia, Lifen

Article Type: Research Article

Abstract: Since the practical production is not continuously available and sometimes suffers unexpected breakdowns, this paper applies uncertainty theory to introducing an uncertain production risk process with breakdowns to handle the production problem with uncertain cycle times (consisting of uncertain on-times and uncertain off-times) and uncertain production amounts. The concept of shortage index of the uncertain production risk process with breakdowns is provided and some formulas for the calculation are given. Furthermore, the shortage time of the uncertain production risk process with breakdowns is proposed and its uncertainty distribution is obtained. Finally, some numerical examples are revealed.

Keywords: Production, risk process, uncertainty theory, uncertain renewal process

DOI: 10.3233/JIFS-200453

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7151-7160, 2020

Authors: Alberto Morales-Rosales, Luis | Algredo-Badillo, Ignacio | Lobato-Baez, Mariana | Hernández-Gracidas, Carlos | Rodríguez-Rangel, Héctor

Article Type: Research Article

Abstract: In this research, we implement an intelligent quantitative model to assess a specific qualitative intelligence scale in children between 5 and 8 years old, based on augmented reality and the well known WISC-IV test. The output of the model is a cognitive factor associated with the analogical reasoning level of the child, and the ulterior analysis of the evaluation measure is intended to serve as an aid for the teacher to discover problems related to the child’s ability to solve visual analogies. A quantitative approach to assess analogical reasoning is suitable to avoid ambiguous evaluations of qualitative results. Also, given …that the assessment employs a visual WISC subtest, it constitutes a non-verbal evaluation. Finally, the fact that the model is based on an intelligent approach guarantees that the assessment process is impartial, based on the quantitative scores obtained, instead of an interpretation of the results. The purpose of this work is to give evidence that a computer-aided adaption, employing augmented reality and a Fuzzy Petri Net, for the WISC test, will improve the teaching-learning process in children ranges from 5 to 8 years old. A case study is analyzed, where both the paper-based and the augmented reality versions are applied to five children with Spanish as their native tongue. We show the feasibility and potentiality of implementing the test in a multimedia version to provide teachers with a more reliable resource for the diagnosis and treatment of possible learning deficiencies in the child regarding disambiguation, non-verbality, and impartiality. Show more

Keywords: Intelligent quantitative model, analogical reasoning, WISC-IV test, augmented reality learning environment, computer-aided assessments

DOI: 10.3233/JIFS-200588

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7161-7175, 2020

Authors: Vijayabalaji, Srinivasan | Balaji, Parthasarathy | Ramesh, Adhimoolam

Article Type: Research Article

Abstract: The impetus of this paper is to broaden the structure of linguistic soft set (LSS) to a new domain namely sigmoid valued fuzzy soft set (SVFSS). Some operating laws on SVFSS are also provided. Using the complement concept on SVFSS we define maximum rejection. This maximum rejection paves a way for defining a new similarity measure on SVFSS termed as maximum likely ratio (MLR). A new MCGDM algorithm for SVFSS is proposed using MLR. An illustrative example of haze equipment problem on sigmoid valued fuzzy soft set setting is also given. A comparative analysis of our approach with the existing …approaches are also presented to justify our work. Show more

Keywords: Sigmoid valued fuzzy soft set, maximum rejection, maximum likely ratio, generalized maximum likely ratio, weighted maximum likely ratio

DOI: 10.3233/JIFS-200594

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7177-7187, 2020

Authors: Al-Zoubi, Ahmad | Tatas, Konstantinos | Kyriacou, Costas

Article Type: Research Article

Abstract: Heterogeneous systems featuring multiple kinds of processors are becoming increasingly attractive due to their high performance and energy savings over their homogeneous counterparts. With the OpenCL as a unified programming language providing program portability across different types of accelerators, finding the best task-to-device mapping will be the key to achieve such a high performance. We introduce in this work the design of a fuzzy logic classifier and the evaluation of its performance in classifying OpenCL workloads in a CPU-GPU-FPGA heterogeneous environment based on carefully analyzed kernel features. The classifier is designed as part of a scheduling scheme. Results demonstrate substantial …improvement in accuracy when compared to other classifiers such as the K-Nearest- Neighbor (KNN), Support-Vector-Machine (SVM), Random-Forest (RF), Naïve-Bayes (NB) and the Bayes-Network (BN) with low computational complexity, facilitating run-time operation. Show more

Keywords: Fuzzy Logic, Heterogeneous, Classification, OpenCL

DOI: 10.3233/JIFS-200616

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7189-7202, 2020

Authors: Ontiveros-Robles, Emanuel | Castillo, Oscar | Melin, Patricia

Article Type: Research Article

Abstract: In recent years, successful applications of singleton fuzzy inference systems have been made in a plethora of different kinds of problems, for example in the areas of control, digital image processing, time series prediction, fault detection and classification. However, there exists another relatively less explored approach, which is the use of non-singleton fuzzy inference systems. This approach offers an interesting way for handling uncertainty in complex problems by considering inputs with uncertainty, while the conventional Fuzzy Systems have their inputs with crisp values (singleton systems). Non-singleton systems have as inputs Type-1 membership functions, and this difference increases the complexity of …the fuzzification, but provides the systems with additional non-linearities and robustness. The main limitations of using a non-singleton fuzzy inference system is that it requires an additional computational overhead and are usually more difficult to apply in some problems. Based on these limitations, we propose in this work an approach for efficiently processing non-singleton fuzzy systems. To verify the advantages of the proposed approach we consider the case of general type-2 fuzzy systems with non-singleton inputs and their application in the classification area. The main contribution of the paper is the implementation of non-singleton General Type-2 Fuzzy Inference Systems for the classification task, aiming at analyzing its potential advantage in classification problems. In the present paper we propose that the use of non-singleton inputs in Type-2 Fuzzy Classifiers can improve the classification rate and based on the realized experiments we can observe that General Type-2 Fuzzy Classifiers, but with non-singleton fuzzification, obtain better results in comparison with respect to their singleton counterparts. Show more

Keywords: Type-2 fuzzy classifiers, Type-2 fuzzy logic, non-singleton

DOI: 10.3233/JIFS-200639

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7203-7215, 2020

Authors: Gao, Wenjing | Zhang, Wenjun | Gao, Haiyan | Zhu, Yonghua

Article Type: Research Article

Abstract: The increasing tendency of people expressing opinions via images online has motivated the development of automatic assessment of sentiment from visual contents. Based on the observation that visual sentiment is conveyed through many visual elements in images, we put forward to tackle visual sentiment analysis under multiple instance learning (MIL) formulation. We propose a deep multiple clustered instance learning formulation, under which a deep multiple clustered instance learning network (DMCILN) is constructed for visual sentiment analysis. Specifically, the input image is converted into a bag of instances through visual instance generation module, which is composed of a pre-trained convolutional neural …network (CNN) and two adaptation layers. Then, a fuzzy c-means routing algorithm is introduced for generating clustered instances as semantic mid-level representation to bridge the instance-to-bag gap. To explore the relationships between clustered instances and bags, we construct an attention based MIL pooling layer for representing bag features. A multi-head mechanism is integrated to form MIL ensembles, which enables to weigh the contribution of each clustered instance in different subspaces for generating more robust bag representation. Finally, we conduct extensive experiments on several datasets, and the experimental results verify the feasibility of our proposed approach for visual sentiment analysis. Show more

Keywords: Visual sentiment analysis, deep multiple clustered instance learning, fuzzy c-means routing, multi-head mechanism

DOI: 10.3233/JIFS-200675

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7217-7231, 2020

Authors: Yoseph, Fahed | Heikkilä, Markku

Article Type: Research Article

Abstract: Market Intelligence is knowledge extracted from numerous data sources, both internal and external, to provide a holistic view of the market and to support decision-making. Association Rules Mining provides powerful data mining techniques for identifying associations and co-occurrences in large databases. Market Basket Analysis (MBA) uses ARM to gain insights from heterogeneous consumer shopping patterns and examines the effects of marketing initiatives. As Artificial Intelligence (AI) more and more finds its way to marketing, it entails fundamental changes in the skills-set required by marketers. For MBA, AI provides important ways to improve both the outcomes of the market basket analysis …and the performance of the analysis process. In this study we demonstrate the effects of AI on MBA by our proposed new MBA model where results of computational intelligence are used in data preprocessing, in market segmentation and in finding market trends. We show with point-of-sale (POS) data of a small, local retailer that our proposed “Åbo algorithm” MBA model increases mining performance/intelligence and extract important marketing insights to assess both demand dynamics and product popularity trends. Additionally, the results show how, as related to the 80/20 percent rule, 78% of revenue is derived 16% of the product assortment. Show more

Keywords: Association rules mining, artificial intelligence, market intelligence, small and medium-sized retailer

DOI: 10.3233/JIFS-200707

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7233-7246, 2020

Authors: Xiao, Lu | Zhang, Siqi | Wei, Guiwu | Wu, Jiang | Wei, Cun | Guo, Yanfeng | Wei, Yu

Article Type: Research Article

Abstract: Since people around the world have gradually attached importance to resource conservation, various countries are actively taking measures to promote environmental protection and sustainable development. Green supply chain management (GSCM) have emerged in this context. Thus, in this essay, a novel intuitionistic fuzzy multiple attribute group decision making (MAGDM) method is designed to tackle this issue. First of all, CRITIC (Criteria Importance Through Inter-criteria Correlation) method is utilized to determine the weights of criteria. Later, the conventional Taxonomy method is extended to the intuitionistic fuzzy environment to compute the value of development attribute of each supplier. Then, the optimal one …can be determined. Eventually, an application about green supplier selection in steel industry is presented, and a comparative analysis is made to demonstrate the superiority of the proposed method. The main features of the proposed algorithm are that they provide a practical solution for selecting GSCM and presents an objective weighting method to enhance the effectiveness of the algorithm. Show more

Keywords: Multiple attribute group decision making (MAGDM), green supply chain management (GSCM), intuitionistic fuzzy sets (IFSs), taxonomy method, CRITIC method, steel industry

DOI: 10.3233/JIFS-200709

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7247-7258, 2020

Authors: Pan, Xingguang | Wang, Shitong

Article Type: Research Article

Abstract: The feature reduction fuzzy c-means (FRFCM) algorithm has been proven to be effective for clustering data with redundant/unimportant feature(s). However, the FRFCM algorithm still has the following disadvantages. 1) The FRFCM uses the mean-to-variance-ratio (MVR) index to measure the feature importance of a dataset, but this index is affected by data normalization, i.e., a large MVR value of original feature(s) may become small if the data are normalized, and vice versa. Moreover, the MVR value(s) of the important feature(s) of a dataset may not necessarily be large. 2) The feature weights obtained by the FRFCM are sensitive to the initial …cluster centers and initial feature weights. 3) The FRFCM algorithm may be unable to assign the proper weights to the features of a dataset. Thus, in the feature reduction learning process, important features may be discarded, but unimportant features may be retained. These disadvantages can cause the FRFCM algorithm to discard important feature components. In addition, the threshold for the selection of the important feature(s) of the FRFCM may not be easy to determine. To mitigate the disadvantages of the FRFCM algorithm, we first devise a new index, named the marginal kurtosis measure (MKM), to measure the importance of each feature in a dataset. Then, a novel and robust feature reduction fuzzy c-means clustering algorithm called the FRFCM-MKM, which incorporates the marginal kurtosis measure into the FRFCM, is proposed. Furthermore, an accurate threshold is introduced to select important feature(s) and discard unimportant feature(s). Experiments on synthetic and real-world datasets demonstrate that the FRFCM-MKM is effective and efficient. Show more

Keywords: Fuzzy c-means, feature reduction learning, marginal kurtosis measure, mean-to-variance ratio

DOI: 10.3233/JIFS-200714

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7259-7279, 2020

Authors: He, Tongze | Guo, Caili | Chu, Yunfei | Yang, Yang | Wang, Yanjun

Article Type: Research Article

Abstract: Community Question Answering (CQA) websites has become an important channel for people to acquire knowledge. In CQA, one key issue is to recommend users with high expertise and willingness to answer the given questions, i.e., expert recommendation. However, a lot of existing methods consider the expert recommendation problem in a static context, ignoring that the real-world CQA websites are dynamic, with users’ interest and expertise changing over time. Although some methods that utilize time information have been proposed, their performance improvement can be limited due to fact that they fail they fail to consider the dynamic change of both user …interests and expertise. To solve these problems, we propose a deep learning based framework for expert recommendation to exploit user interest and expertise in a dynamic environment. For user interest, we leverage Long Short-Term Memory (LSTM) to model user’s short-term interest so as to capture the dynamic change of users’ interests. For user expertise, we design user expertise network, which leverages feedback on users’ historical behavior to estimate their expertise on new question. We propose two methods in user expertise network according to whether the dynamic property of expertise is considered. The experimental results on a large-scale dataset from a real-world CQA site demonstrate the superior performance of our method. Show more

Keywords: Expert recommendation, user modeling, neural network, community question answering

DOI: 10.3233/JIFS-200729

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7281-7292, 2020

Authors: Xu, Junxiang | Zhang, Jin | Guo, Jingni

Article Type: Research Article

Abstract: Taking into account the uncertainties of the factors of in-transit transportation cost, hub transshipment cost, hub construction cost, in-transit transportation time, hub transshipment time, and demand, this study uses triangular fuzzy numbers, expected value criteria, and distribution of credibility measure to minimise the total transportation cost of the hub-and-spoke road-rail combined transport (RRCT) network and the maximum transportation limit time between the origin and destination of the network. Firstly, a non-linear programming mathematical model is constructed for the regional hub-and-spoke RRCT network based on uncertain cost-time-demand. Then, an improved genetic algorithm is designed to obtain an optimized scheme. The algorithm …uses genetic algorithm to search the global space, and uses two local search methods, i.e. shift and exchange, to search the local space. Finally, the RRCT network along the Yaan-Linzhi section of the Sichuan-Tibet Railway is used as the research object to verify the applicability and effectiveness of the regional hub-and-spoke RRCT network model and the algorithm proposed in the study. Show more

Keywords: Road-rail combined transport, hub-and-spoke network, uncertain factor, improved genetic algorithm, Sichuan-Tibet Railway

DOI: 10.3233/JIFS-200748

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7293-7313, 2020

Authors: Wei, Lixin | Zhang, JinLu | Fan, Rui | Li, Xin | Sun, Hao

Article Type: Research Article

Abstract: In this article, an effective method, called an adaptive covariance strategy based on reference points (RPCMA-ES) is proposed for multi-objective optimization. In the proposed algorithm, search space is divided into independent sub-regions by calculating the angle between the objective vector and the reference vector. The reference vectors can be used not only to decompose the original multi-objective optimization problem into a number of single-objective subproblems, but also to elucidate user preferences to target a preferred subset of the whole Pareto front (PF). In this respect, any single objective optimizers can be easily used in this algorithm framework. Inspired by the …multi-objective estimation of distribution algorithms, covariance matrix adaptation evolution strategy (CMA-ES) is involved in RPCMA-ES. A state-of-the-art optimizer for single-objective continuous functions is the CMA-ES, which has proven to be able to strike a good balance between the exploration and the exploitation of search space. Furthermore, in order to avoid falling into local optimality and make the new mean closer to the optimal solution, chaos operator is added based on CMA-ES. By comparing it with four state-of-the-art multi-objective optimization algorithms, the simulation results show that the proposed algorithm is competitive and effective in terms of convergence and distribution. Show more

Keywords: Multi-objective optimization problem, Reference point, Covariance matrix adaptation evolutionary strategy, Chaos operator

DOI: 10.3233/JIFS-200749

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7315-7332, 2020

Authors: Zuo, Mingcheng | Dai, Guangming

Article Type: Research Article

Abstract: When optimizing complicated engineering design problems, the search spaces are usually extremely nonlinear, leading to the great difficulty of finding optima. To deal with this challenge, this paper introduces a parallel learning-selection-based global optimization framework (P-lsGOF), which can divide the global search space to numbers of sub-spaces along the variables learned from the principal component analysis. The core search algorithm, named memory-based adaptive differential evolution algorithm (MADE), is parallel implemented in all sub-spaces. MADE is an adaptive differential evolution algorithm with the selective memory supplement and shielding of successful control parameters. The efficiency of MADE on CEC2017 unconstrained problems and …CEC2011 real-world problems is illustrated by comparing with recently published state-of-the-art variants of success-history based adaptative differential evolution algorithm with linear population size reduction (L-SHADE) The performance of P-lsGOF on CEC2011 problems shows that the optimized results by individually conducting MADE can be further improved. Show more

Keywords: Parallel optimization framework, real-world problems, learning-based differential evolution

DOI: 10.3233/JIFS-200753

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7333-7361, 2020

Authors: Chen, Chen | Ma, Feng | Liu, Jialun | Negenborn, Rudy R. | Liu, Yuanchang | Yan, Xinping

Article Type: Research Article

Abstract: Human experience is regarded as an indispensable part of artificial intelligence in the process of controlling or decision making for autonomous cargo ships. In this paper, a novel Deep Q-Network-based (DQN) approach is proposed, which performs satisfactorily in controlling a cargo ship automatically without any human experience. At the very beginning, we use the model of KRISO Very Large Crude Carrier (KVLCC2) to describe a cargo ship. To manipulate this ship has to conquer great inertia and relatively insufficient driving force. Subsequently, customary waterways, regulations, conventions are described with Artificial Potential Field and value-functions in DQN. Based on this, the …artificial intelligence of planning and controlling a cargo ship can be obtained by undertaking sufficient training, which can control the ship directly, while avoiding collisions, keeping its position in the middle of the route as much as possible. In simulation experiments, it is demonstrated that such an approach performs better than manual works and other traditional methods in most conditions, which makes the proposed method a promising solution in improving the autonomy level of cargo ships. Show more

Keywords: Deep Q-network, reinforcement learning, artificial intelligence, autonomous ships

DOI: 10.3233/JIFS-200754

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7363-7379, 2020

Authors: Hashmi, Masooma Raza | Riaz, Muhammad | Smarandache, Florentin

Article Type: Research Article

Abstract: This manuscript contributes a progressive mathematical model for the analysis of novel coronavirus (COVID-19) and improvement of the victim from COVID-19 with some suitable circumstances. We investigate the innovative approach of the m-polar neutrosophic set (MPNS) to deal with the hesitations and obscurities of objects and rational thinking in decision-making obstacles. In this article, we propose the generalized weighted aggregation and generalized Einstein weighted aggregation operators in the context of m-polar neutrosophic numbers (MPNNs). The motivational aim of this paper is that we present a case study based on data amalgamation for the diagnosis of COVID-19 and examine with the …help of MPN-data. By using the proposed technique on generalized operators, we discuss the recovery of the victim with the time factor, proper medication, and some suitable circumstances. Ultimately, we present the advantages and productiveness of the proposed algorithm under the influence of parameter ð to the recovery results. The versatility and superiority of the proposed methodology with some existing approaches can be observed by the comparative analysis. Show more

Keywords: m-polar neutrosphic set (MPNS), m-polar neutrosophic generalized weighted aggregation (MPNGWA) operator, m-polar neutrosophic generalized Einstein weighted aggregation (MPNGEWA) operator, multi-criteria decision-making (MCDM) for medical diagnosis, Recovery of patient, comparative analysis

DOI: 10.3233/JIFS-200761

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7381-7401, 2020

Authors: Huang, Yangke | Wang, Zhiming

Article Type: Research Article

Abstract: Network pruning has been widely used to reduce the high computational cost of deep convolutional neural networks(CNNs). The dominant pruning methods, channel pruning, removes filters in layers based on their importance or sparsity training. But these methods often give limited acceleration ratio and encounter difficulties when pruning CNNs with skip connections. Block pruning methods take a sequence of consecutive layers (e.g., Conv-BN-ReLu) as a block and remove entire block each time. However, previous methods usually introduce new parameters to help pruning and lead additional parameters and extra computations. This work proposes a novel multi-granularity pruning approach that combines block pruning …with channel pruning (BPCP). The block pruning (BP) module remove blocks by directly searches the redundant blocks with gradient descent and leaves no extra parameters in final models, which is friendly to hardware optimization. The channel pruning (CP) module remove redundant channels based on importance criteria and handles CNNs with skip connections properly, which further improves the overall compression ratio. As a result, for CIFAR10, BPCP reduces the number of parameters and MACs of a ResNet56 model up to 78.9% and 80.3% respectively with <3% accuracy drop. In terms of speed, it gives a 3.17 acceleration ratio. Our code has been made available at https://github.com/Pokemon-Huang/BPCP . Show more

Keywords: Neural network compression, network pruning, residual networks

DOI: 10.3233/JIFS-200771

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7403-7410, 2020

Authors: Nataraj, Sathees Kumar | Paulraj, M. P. | Bin Abdullah, Ahmad Nazri | Bin Yaacob, Sazali

Article Type: Research Article

Abstract: In this paper, a speech-to-text translation model has been developed for Malaysian speakers based on 41 classes of Phonemes. A simple data acquisition algorithm has been used to develop a MATLAB graphical user interface (GUI) for recording the isolated word speech signals from 35 non-native Malaysian speakers. The collected database consists of 86 words with 41 classes of phoneme based on Affricatives, Diphthongs, Fricatives, Liquid, Nasals, Semivowels and Glides, Stop and Vowels. The speech samples are preprocessed to eliminate the undesirable artifacts and the fuzzy voice classifier has been employed to classify the samples into voiced sequence and unvoiced sequence. …The voiced sequences are divided into frame segments and for each frame, the Linear Predictive co-efficients features are obtained from the voiced sequence. Then the feature sets are formed by deriving the LPC features from all the extracted voiced sequences, and used for classification. The isolated words chosen based on the phonemes are associated with the extracted features to establish classification system input-output mapping. The data are then normalized and randomized to rearrange the values into definite range. The Multilayer Neural Network (MLNN) model has been developed with four combinations of input and hidden activation functions. The neural network models are trained with 60%, 70% and 80% of the total data samples. The neural network architecture was aimed at creating a robust model with 60%, 70%, and 80% of the feature set with 25 trials. The trained network model is validated by simulating the network with the remaining 40%, 30%, and 20% of the set. The reliability of trained network models were compared by measuring true-positive, false-negative, and network classification accuracy. The LPC features show better discrimination and the MLNN neural network models trained using the LPC spectral band features gives better recognition. Show more

Keywords: Fuzzy voice classifier, Malaysian English pronunciation, linear predictive coefficients (LPCC), neural network models (MLNN).

DOI: 10.3233/JIFS-200780

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7411-7429, 2020