Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Rehabilitation Ergonomics
Article type: Research Article
Authors: Hagglund, Kara L.; | Jacobs, Karen
Affiliations: 1640 Worcester Road, D 209, Framingham, MA 01701, USA | Department of Occupational Therapy, Boston University, 635 Commonwealth Avenue, Boston, MA 02215, USA
Note: [] Corresponding author. Tel. and fax: + 1 508 8799878, email: [email protected]
Abstract: Objective: The purpose of this study was to examine wrist motions in video display terminal (VDT) workers using the Greenleaf Medical WristSystem. This study was developed because of the limited research about the effectiveness of ergonomic equipment for VDT operators, as well as the recent increase in cumulative trauma disorders (CTDs) among these workers. Study design: Twenty adult VDT operators with no history of CTD were recruited from Boston University and surrounding businesses. WristSensorTM gloves containing dual-axis sensors for detection of dynamic wrist movements were worn by participants. Calibrations were then performed through the Movement Analysis System (MAS) software, after which participants were requested to type using a wrist rest (condition A), using forearm supports (condition B), using the wrist rest and forearm supports together (condition C), and finally using no form of wrist or forearm support (condition D). It was assumed by the investigators that wrist extension and ulnar deviation would decrease when using the wrist rest or forearm support, with the greatest change occurring when using both types of support. Questionnaires requesting demographic information were completed by each participant. Contrast scores were also calculated and converted into t -tests and their corresponding P -values. Results: The average degrees of motion for both right and left hands were: flexion 4.5°, extension 18.9°, ulnar deviation 15.3°, and radial deviation 2.0°. P-values for all four conditions in the left hand were found to be significant and are as follows: extension t(19) = 2.35, P < 0.025, flexion t(19) = 2.17, P < 0.025, ulnar deviation t(19) = 3.41, P < 0.0025, and radial deviation t(19) = 2.5, P < 0.025. The only significant P-value in the right hand was during ulnar deviation: t(19) = 2.7, P < 0.01. Discussion: Research suggests that wrist extension greater than 15° and ulnar deviation greater than 20° can be predisposing factors to the development of CTDs. In this study, all four wrist motions remained under 20° during the three conditions using the wrist rest and forearm supports. A trend of continued decreases in ulnar deviation and wrist extension from using no supports to that requiring both types of supports was also observed. Specifically, the smallest degree of wrist extension appeared when participants used only the wrist rest; ulnar deviation was smallest when both supports were used. Right hand degree values were found to be generally larger than those for the left hand. It is hoped that these results can serve as a foundation for future investigation into the effectiveness of wrist and forearm supports in reducing CTDs.
Keywords: Constrained postures, Ergonomic support, Keyboard operators
DOI: 10.3233/WOR-1996-7302
Journal: Work, vol. 7, no. 3, pp. 145-162, 1996
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]