Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Arlati, Saraa; b; * | Spoladore, Danieleb | Mottura, Stefanob | Zangiacomi, Andreab | Ferrigno, Giancarloa | Sacchetti, Rinaldoc | Sacco, Marcob
Affiliations: [a] Department of Electronics, Information and Bioengineering, Politecnico di Milano, Milan, Italy | [b] Institute of Industrial Technologies and Automation, National Research Council, Milan, Italy | [c] National Institute for Insurance against Accidents at Work, Budrio, Bologna, Italy
Correspondence: [*] Address for correspondence: Sara Arlati, Institute of Intelligent Industrial Technologies and Systems for Advanced Manufacturing, Italian National Research Council (CNR),Via Previati 1/E, 23900 Lecco, Italy. Tel.: +39 0341 2350202; E-mail: [email protected].
Abstract: BACKGROUND:Return to work represents an important milestone for workers who were injured during a workplace accident, especially if the injury results in needing a wheelchair for locomotion. OBJECTIVE:The aim of the study was to design a framework for training novice wheelchair users in regaining autonomy in activities of daily living and in the workplace and for providing medical personnel with objective data on users’ health and work-related capabilities. METHODS:The framework design was accomplished following the “Usability Engineering Life Cycle” model. According to it, three subsequent steps defined as “Know your User”, “Competitive Analysis” and “Participatory Design” have been carried out to devise the described framework. RESULTS:The needs of the end-users of the framework were identified during the first phase; the Competitive Analysis phase addressed standard care solutions, Virtual Reality-based wheelchair simulators, the current methodologies for the assessment of the health condition of people with disability and the use of semantic technologies in human resources. The Participatory Design phase led to the definition of an integrated user-centred framework supporting the return to work of wheelchair users. CONCLUSION:The results of this work consists in the design of an innovative training process based on virtual reality scenarios and supported by semantic web technologies. In the near future, the design process will proceed in collaboration with the Italian National Institute for Insurance against Accidents at Work (INAIL). The whole framework will be then implemented to support the current vocational rehabilitation process within INAIL premises.
Keywords: Virtual reality, vocational rehabilitation, semantic web, work reintegration, ICF
DOI: 10.3233/WOR-182829
Journal: Work, vol. 61, no. 4, pp. 603-625, 2018
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]