Affiliations: George W. Woodruff School of Mechanical Engineering and Parker H. Petit Institute for Bioengineering and Bioscience, Georgia Institute of Technology, Atlanta, GA 30332‐0405, USA
Note: [] Address for correspondence: Georgia Institute of Technology, 315 Ferst Dr, IBB rm 2312, Atlanta, GA 30332‐0405, USA. Tel.: +1 404 894 4219; Fax: +1 404 385 1397; E‐mail: [email protected].
Abstract: While not generally viewed as physiologically significant in articular cartilage, substantial tension can develop in fibrocartilage structures and in articular cartilage injuries. This study examined how different amplitudes of cyclic tension influence chondrocyte matrix synthesis. Bovine articular chondrocytes seeded in fibrin gels were loaded continuously for 48 hours at 1.0 Hz with displacements of 5%, 10%, or 20%. Protein and proteoglycan synthesis were measured by 3H‐proline and 35S‐sulfate incorporation, respectively. A poroelastic finite element model of the fibrin gel was developed to determine the strain distributions, hydrostatic pressures, and fluid velocities within the constructs at the various levels of displacement. Compared to unloaded controls, 10% and 20% displacements inhibited proteoglycan synthesis to the same extent, while 5% displacement had no effect. Tensile loading did not significantly affect protein synthesis. The finite element model predicted a wide range of strains and fluid velocities within the region of the gel analyzed for matrix synthesis, and the ranges overlapped for the different levels of displacement. These results indicate that the cyclic tension amplitude influences chondrocyte proteoglycan synthesis and that there may be a threshold in the response.
