Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Nasseri, Simin | Bilston, Lynne; | Tanner, Roger
Affiliations: School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW 2006, Australia | Prince of Wales Medical Research Institute, University of New South Wales, Randwick, NSW 2031, Australia
Note: [] Address for correspondence: Dr Lynne Bilston, Prince of Wales Medical Research Institute, University of New South Wales, Barker St., Randwick, NSW 2031, Australia. Tel: +61 2 9382 7924; Fax: +61 2 9382 2643; E‐mail: [email protected].
Abstract: Conducting experiments on very soft biological tissues can be difficult. Traditionally, unconfined compression and shear have been used. Here, an improved method of compression testing, lubricated squeezing flow is described. This gives a uniform compression along the squeezing axis and almost uniform equi‐biaxial elongation at right angles to the squeezing axis, with minimal shear deformation due to the constant lubrication of the sample surfaces during testing. Sample results for porcine liver obtained using this method are described here.
Keywords: Viscoelastic, compression, liver, rheology
Journal: Biorheology, vol. 40, no. 5, pp. 545-551, 2003
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]