Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2023: 2
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Mathi, Senthilkumar | Jothi, Uma | Saravanan, G. | Ramalingam, Venkadeshan | Sreejith, K.
Article Type: Research Article
Abstract: Mobile devices have risen due to internet growth in recent years. The next generation of internet protocol is evolving for mobile devices to generate their addresses and get continuous services across networks to support the enormous number of addresses in network-based mobility. The mobile device updates its current location to its home network and the correspondent users through a binding update scheme in the visited network. Numerous studies have investigated binding update schemes to verify the reachability of the mobile device at its home network. However, most schemes endure security threats due to the incompetence of authenticating user identity and …concealing the temporary location of mobile devices. To address these issues, this paper proposes a secure and efficient binding update scheme (One-CLU) by incorporating a one-key-based cryptographically generated address (CGA) to validate and conceal the address ownership of mobile devices with minimal computations. The security correctness of the proposed One-CLU scheme is verified using AVISPA – a model checker. Finally, the simulation and the numerical results showthat the proposed scheme significantly reduces communication payloads and costs for the binding update, binding refresh, and packet delivery. Show more
Keywords: Mobile communication, routing, privacy, cryptography, communication security
DOI: 10.3233/JIFS-219422
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Al-Azani, Sadam | Almeshari, Ridha | El-Alfy, El-Sayed
Article Type: Research Article
Abstract: Speaker demographic recognition and segmentation analytics play a key role in offering personalized experiences across different automated industries and businesses. This paper aims at developing a multi-label demographic recognition system for Arabic speakers from audio and associated textual modalities. The system can detect age groups, genders, and dialects, but it can be easily extended to incorporate more demographic traits. The proposed method is based on deep learning for feature learning and recognition. Representations of audio modality are learned through 3D spectrogram and AlexNet CNN-based architecture. An AraBERT transformer is employed for learning representations of the textual modality. Additionally, a method …is provided for fusing audio and textual representations. The effectiveness of the proposed method is evaluated using the Saudi Audio Dataset for Arabic (SADA), which is a recently published database containing audio recordings of TV shows in different Arabic dialects. The experimental findings show that when using models with standalone modalities for multi-label demographic classification, textual modality using AraBERT performed better than the audio modality represented using 3D spectrogram along with AlexNet CNN-based architecture. Furthermore, when combining both modalities, audio and textual, significant improvement has been attained for all demographic traits. Show more
Keywords: Demographic, 3D spectrogram, AraBERT, multi-label classification, Arabic LLMs, multimodal deep learning
DOI: 10.3233/JIFS-219389
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Midula, P. | Shine, Linu | George, Neetha
Article Type: Research Article
Abstract: Fabrication of semiconductor wafers is a complex process and chances of defect wafers are high. Because of defective wafers the circuit patterns will not be created correctly and it is necessary to identify them. Manual identification of defects are time consuming and expensive. Deep learning methods are widely used for defect detection. In this paper we propose a simple Convolutional Neural Network (CNN) model for classification of nine defects in wafers. A custom CNN consisting of 9 layers is used for the classification of defects as Center, Donut, Edge-Loc, Edge-Ring, Loc, Random, Scratch, Near-full, and None. Performance of the model …is evaluated using WM-811K dataset. Results shows that the model classifies the defects with high confidence score and an accuracy of 99.1% is achieved using this method. Further, the convolution operation in the CNN is realized using Coordinate Rotation Digital Computer (CORDIC) algorithm. The model is implemented in Field Programmable Gate Arrays (FPGA) and proved less complex method and consume less computational power than conventional methods. Show more
Keywords: CNN, CORDIC, FPGA, wafer maps
DOI: 10.3233/JIFS-219430
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-9, 2024
Authors: Kaur, Amandeep | Rama Krishna, C. | Patil, Nilesh Vishwasrao
Article Type: Research Article
Abstract: Software-Defined Networking (SDN) is a modern networking architecture that segregates control logic from data plane and supports a loosely coupled architecture. It provides flexibility in this advanced networking paradigm for any changes. Further, it controls the complete network in a centralized using controller(s). However, it comes with several security issues: Exhausting bandwidth and flow tables, Distributed Denial of Service (DDoS) attacks, etc. DDoS is a powerful attack for Internet-based applications and services, traditional and SDN paradigms. In the case of the SDN environment, attackers frequently target the central controller(s). This paper proposes a Kafka Streams-based real-time DDoS attacks classification approach …for the SDN environment, named KS-SDN-DDoS. The KS-SDN-DDoS has been designed using highly scalable H2O ML techniques on the two-node Apache Hadoop Cluster (AHC). It consists of two modules: (i) Network Traffic Capture (NTCapture) and (ii) Attack Detection and Traffic Classification (ADTClassification). The NTCapture is deployed on the two nodes Apache Kafka Streams Cluster (AKSC-1). It captures incoming network traffic, extracts and formulates attributes, and publishes significant network traffic attributes on the Kafka topic. The ADTClassification is deployed on the two nodes Apache Kafka Streams Cluster (AKSC-2). It consumes network flows from the Kafka topic, classifies it based on the ten attributes, and publishes it to the decision Kafka topic. Further, it saves attributes with outcome to the Hadoop Distributed File System (HDFS). The KS-SDN-DDoS approach is designed and validated using the recent “DDoS Attack SDN dataset”. The result shows that the proposed system gives better classification accuracy (100%). Show more
Keywords: Control plane, real-time, dynamic network, Apache Hadoop, data plane, Kafka streams
DOI: 10.3233/JIFS-219405
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Xu, Ying | Ji, Xinrong | Zhu, Zhengyang
Article Type: Research Article
Abstract: With the increasing penetration of distributed energy resources (DER) in microgrids, DER power inverters have become a critical asset for providing power support to these microgrids. Meanwhile, the grid-forming (GFM) inverters, among these DER inverters, have gained significant attention in microgrid applications for their capability to enable the DERs to operate in different microgrid conditions and various operation modes. Moreover, with the implementation of these GFM inverters, smooth operation mode transition, GFM functions as well as black start functions can be obtained to improve the operation of the microgrid systems. In this article, a generalized control method for a single-phase …GFM inverter is developed for community microgrid applications, facilitating smooth operation behavior in both operation modes with grid support functions and stable transition for different microgrid conditions. The control design procedure and function analysis of the proposed control method are explained in detail based on the community microgrid system. The effectiveness of the method in this paper is demonstrated on a 10 kW single-phase GFM inverter prototype with comparison to a model predictive method in recent literature. Show more
Keywords: Grid-forming inverter, microgrid, grid-support function, stable transition
DOI: 10.3233/JIFS-236902
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-18, 2024
Authors: Tian, Jing | Zhao, Ziqi | Lin, Zheng | Zhang, Fengling | Chen, Renzhen
Article Type: Research Article
Abstract: Inter-shaft bearings are an essential component of aircraft engines, and their operational status determines the safety of aircraft engine operation. Therefore, to improve the accuracy of fault type prediction and enrich the feature information in vibration signals of aircraft engine inter-shaft bearings, this paper proposes an STFT-CNN model based on the AlexNet architecture, extending its application to the research of aircraft engine inter-shaft bearing fault diagnosis. This approach addresses the common reliance on personnel experience for fault type diagnosis in traditional aircraft engine inter-shaft bearing fault diagnosis. Firstly, real vibration fault signals from inter-shaft bearings are collected through experiments to …enrich feature information in non-stationary signals using STFT time-frequency methods. Secondly, utilizing the high interpretability of the STFT-CNN model, fault feature data from inter-shaft bearings under various operating conditions are extracted to refine our understanding of fault feature information. Finally, leveraging the robustness of the STFT-CNN model, fault types are classified and predicted. The training process involves comparative analysis using different pooling algorithms, time-frequency analysis methods, and various deep learning network models. The results demonstrate that the STFT-CNN model, employing the maximum pooling algorithm, outperforms other models in predicting inter-shaft bearing faults, achieving an average fault prediction accuracy of 98.8% . Show more
Keywords: Inter-shaft bearings, STFT-CNN model, pooling algorithms, feature extraction, classification prediction
DOI: 10.3233/JIFS-240044
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Li, Yibing | Jiang, Shijin | Wang, Lei
Article Type: Research Article
Abstract: With explosive growth of industrial big data, workshop scheduling faces problems such as high complexity, multi-dimensionality and low stability. Recent years, the wide application of deep learning provides new idea for scheduling problem. In this paper, a hybrid deep convolution network and differential evolution algorithm is proposed to solve the non-permutation flow shop scheduling problem with the goal of minimizing total completion time. Mining relationship between job attributes and process priority by deep convolutional network is core idea of this method. In this paper, differential evolution algorithm is used to obtain the data set for deep learning, and neighborhood search …algorithm is used to optimize scheduling solution. Additionally, a method combining k-means algorithm and data statistics is proposed, which provides a reasonable way for priority division. The experimental results show that this method can greatly improve scheduling efficiency. Show more
Keywords: Differential evolution algorithm, convolutional neural network, K-means algorithm; priority, flow shop scheduling
DOI: 10.3233/JIFS-236874
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-17, 2024
Authors: Duvvuri, Kavya | Kanisettypalli, Harshitha | Masabattula, Teja Nikhil | Amudha, J. | Krishnan, Sajitha
Article Type: Research Article
Abstract: Glaucoma is an eye disease that requires early detection and proper diagnosis for timely intervention and treatment which can help slow down further progression and to manage intraocular pressure. This paper aims to address the problem by proposing a novel approach that combines a model-based Reinforcement Learning (RL) approach, called DynaGlaucoDetect, with ocular gaze data. By leveraging the RL algorithms to simulate and predict the dynamics of glaucoma, a model-based approach can improve the accuracy and efficiency of glaucoma detection by enabling better preservation of visual health. The RL agent is trained using real experiences and synthetic experiences which are …generated using the model-based algorithm Dyna-Q. Two different Q-table generation methods have been discussed: the Direct Synthesis Method (DSM) and the Indirect Synthesis Method (IdSM). The presence of glaucoma has been detected by comparing the reward score a patient obtains with the threshold values obtained through the performed experimentation. The scores obtained using DSM and IdSM have been compared to understand the learning of the agent in both cases. Finally, hyperparameter tuning has been performed to identify the best set of hyperparameters. Show more
Keywords: Glaucoma detection, model-based RL, Dyna-Q algorithm, reward system
DOI: 10.3233/JIFS-219400
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Wang, Jing | Gao, Tingting | Du, Hongxu | Tu, Chuang
Article Type: Research Article
Abstract: To address the issue of final delivery route planning in the community group purchase model, this study takes into full consideration logistics vehicles of different energy types. With the goal of minimizing the sum of vehicle operating costs, delivery timeliness costs, goods loss costs, and carbon emissions costs, a multi-objective optimization model for community group purchase final delivery route planning is constructed. An improved genetic algorithm with a hill-climbing algorithm is utilized to enhance adaptive genetic operators, preventing the algorithm from getting stuck in local optima and improving the solution efficiency. Finally, a case study simulation is conducted to validate …the feasibility of the model and algorithm. Experimental results indicate that currently, among the three types of vehicles, fuel logistics vehicles still have an advantage in terms of vehicle usage cost. Electric logistics vehicles exhibit the poorest performance with the highest cost per hundred kilometers, but their sole advantage lies in their high energy release efficiency, enabling optimal low-carbon vehicle performance. Battery-swapping logistics vehicles perform the best in terms of carbon emissions, combining the advantages of both fuel-based and electric logistics vehicles. Therefore, battery-swapping logistics vehicles are a favorable choice for replacing fuel-based logistics vehicles in the future, offering promising prospects for future development. Show more
Keywords: Community group-buying, the route problem of end-distribution, improved genetic algorithm, carbon emission cost
DOI: 10.3233/JIFS-234773
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Gao, Dongling | Ma, Suhong | Kong, Xiangchuan
Article Type: Research Article
Abstract: In today’s Higher Education System (HES), Smart Learning (SL), also known as Intelligent Learning (IL) or Adaptive Learning (AL), plays an increasingly vital role. No longer is the traditional, one-size-fits-all method of education suitable for filling the several demands of students. Using SL technologies powered by Artificial Intelligence (AI) and Machine Learning (ML) algorithms can potentially revolutionize the HES. An emerging area of study, edge-based SL helps use Edge Computing (EC) to provide learners with instantaneous, specialized, and context-aware learning. Internet of Things (IoT) devices are becoming increasingly well-liked, and data is proliferating. Using video data as a primary source …of learning content and delivering it via EC infrastructure is what is referred to as “Video Streaming (VS)” in Edge-Based Learning (EBL). By examining the importance of providing mobile video clients with a high-quality visual experience—especially considering that video streaming (VS) traffic makes up a significant amount of mobile network traffic—the research gap is filled. The proposed Content Delivery Scheme (CDS), which is based on long short-term memory, is intended to improve security and privacy protocols, accelerate network service response times, and increase application intelligence. The project intends to close the current gap in edge-based Smart Learning (SL) technologies, namely in the distribution of video material for adaptive learning in higher education, by concentrating on these elements. Given that VS traffic forms a considerable portion of mobile network traffic, this paper aims to investigate the significance of delivering a performing visual experience to mobile video clients. Fast network service response, enhanced application intelligence, and enhanced security and privacy are all made possible by the proposed LSTM-based Content Delivery Scheme (CDS). The proposed approach attains minimal stall time of 2347 ms, which outperforms the existing techniques. Show more
Keywords: Higher education system, IoT, machine learning, e-Learning, edge computing, content delivery scheme, security
DOI: 10.3233/JIFS-237485
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-11, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]