Journal of Intelligent & Fuzzy Systems - Volume 45, issue 3

Authors: Muthulakshmi, S. | Chitra, R.

Article Type: Research Article

Abstract: Smart grid is proposed as a solution to the problems of production, distribution, monitoring, and control of the electricity in traditional power grids. Smart grid networks place IoT sensor nodes at various grid lines and collect large volume of data about power flow, usage etc. The collected data are analyzed for various applications like demand forecasting, fault diagnosis and fault prediction etc. The sensor nodes and the communication links can be compromised affecting the privacy of consumers. False data can be propagated with malicious intentions. This work proposes a secure and privacy preserving framework for smart grid IoT networks to …secure the data and decision at sensor nodes and communication links. The work proposes a novel Data and Decision rules Secure Efficient Smart Grid (DDSESG) framework integrating secure compressive sensing technique with blockchain and interplanetary file system (IPFS) for securing both data and decision. Through experimental analysis, the proposed solution is found to provide higher resiliency against data security attacks at comparative 12.4% lower computation cost, 15% lower communication cost, 19.9% lower storage cost. Forecasting on transformed data in proposed solution had only a marginal 1.08 % difference in accuracy compared to forecasting on original data. Show more

Keywords: Internet of things, blockchain, IPFS, smart grid, compressive sensing, transform coding

DOI: 10.3233/JIFS-231792

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3701-3714, 2023

Authors: Bhuvaneswary, N. | Deny, J. | Lakshmi, A.

Article Type: Research Article

Abstract: Universal Verification Methodology (UVM) caters to an essential role in verifying the different categories of circuits ranging from small-scale chips to complex system-on-chip architectures. Constrained random simulations are an indispensable part of UVM and are often used for design verification. However, the effort and time spent manually updating and analyzing the design input constraints result in high time complexity, which typically impacts the coverage goal and fault verification ratio. To overcome this problem, this paper proposes a novel hybrid optimized verification framework that combines Reinforcement Learning (RL) and Deep Neural Networks (DNN) for automatically optimizing the input constraints, accelerating faster …verification with a high coverage ratio. The proposed algorithm uses reinforcement learning to generate all possible vector sequences needed for testing the target devices and corresponding outputs of the target devices and potential design errors. Furthermore, the framework intends to use high-speed deep-feedforward neural networks to automate and optimize the constraints during runtime. The proposed framework was developed using Python interfaced with the TCL environment. Extensive experimentation was carried out using several circuits, including multi-core designs, and performance parameters such as coverage accuracy, speed, and computational complexity were calculated and analyzed. The experiment demonstrated the proposed framework remarkable results, showing its superior performance in faster coverage and fewer misclassification errors. Furthermore, the proposed framework is compared with existing verification frameworks and other classical learning models. Good results demonstrate that the proposed framework increases the 4.5x speed for verifying multi-core designs and the 99% accuracy of detection and coverage. Show more

Keywords: Universal verification methodology, reinforcement learning, deep feed forward neural network, multi-core designs

DOI: 10.3233/JIFS-232132

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3715-3728, 2023

Authors: Yuan, Ting | Qu, Huizhen | Pan, Dong

Article Type: Research Article

Abstract: The current article explores the affects of space-time discrete stochastic competitive neural networks. In line with a discrete-space and discrete-time constant variation formula, boundedness and stability are addressed to the space-time discrete stochastic competitive neural networks. Notably, the best convergence speed can be computed by a non-linear optimization problem. In the end, random periodic sequences with respect to time variable of the discrete-space and discrete-time stochastic competitive neural networks are discussed. The results indicate that spatial diffusion with non-negative density factors has no effect on the global mean square boundedness and stability and random periodicity of the network model. The …current article is precursory in consideration of space-time discrete competitive neural networks. Show more

Keywords: Competitive neural networks, space, random, periodicity, exponential difference

DOI: 10.3233/JIFS-230821

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3729-3748, 2023

Authors: Li, Zhaowen | Luo, Damei | Yu, Guangji

Article Type: Research Article

Abstract: Attribute reduction for incomplete data is a hot topic in rough set theory (RST). A fuzzy probabilistic information system (FPIS) combines of fuzzy relations that satisfy the probability distribution about objects, which can be regarded as an information system (IS) with fuzzy relations. This paper studies attribute reduction in an FPIS. Based on the available information of objects on an ISVIS, the probability distribution formula of objects is first defined. Then, an FPIS can be induced by an ISVIS. Next, attribute reduction in a FPIS is proposed similar to an IS. Moreover, information granulation and information entropy in an FPIS …is defined, and the corresponding algorithms are constructed. Finally, the effectiveness of the constructed algorithms is verified by k-means clustering, Friedman test and Nemenyi test. Show more

Keywords: Incomplete set-valued data, FPIS, attribute reduction, core, algorithm

DOI: 10.3233/JIFS-230865

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3749-3765, 2023

Authors: Turanoğlu Şirin, Betül

Article Type: Research Article

Abstract: The use of Unmanned Aerial Vehicle (UAV) platforms has been increasing day by day and it has become an important technology. In this study, how the engines should be selected in the design of a rotary wing UAV system is considered a multi-criteria decision-making (MCDM) problem. This MCDM problem has not yet been encountered in the literature. Therefore, a hybrid MCDM approach based on the fuzzy Best Worst Method (BWM) and Multi Attributive Ideal-Real Comparative Analysis (MAIRCA) is proposed to solve this problem. In the proposed approach, the decision makers determine 6 criteria (KV value, thrust, weight, efficiency, battery, electronic …speed controller (ESC)) and 6 different engine (A1 , A2 , A3 , A4 , A5 , A6 ) alternatives. The fuzzy BWM was used to calculate the weights of criteria, while the MAIRCA was used for the selection of alternatives. According to the results obtained, the three most effective criteria were thrust, KV value, and weight, respectively. The three best engine options were found as A3 , A1 , and A6 . Moreover, sensitivity analysis was performed to observe the change in the ranking of alternatives according to different weights of criteria. MABAC, MARCOS, and COPRAS methods were used to compare the alternative rankings found with the MAIRCA. Show more

Keywords: Multi criteria decision making, rotary wing unmanned aerial vehicle, selection of appropriate engine, fuzzy BWM, MAIRCA

DOI: 10.3233/JIFS-231143

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3767-3778, 2023

Authors: Xiang, Yan | Liu, Wei | Guo, Junjun | Zhang, Li

Article Type: Research Article

Abstract: Chinese medical named entity recognition (CMNER) aims to extract entities from Chinese unstructured medical texts. Existing character-based NER models do not comprehensively consider character’s characteristics from different perspectives, which limits their performance in applying to CMNER. In this paper, we propose a local and global character representation enhanced model for CMNER. For the input sentence, the model fuses the spacial and sequential character representation using autoencoder to get the local character representation; extracts the global character representation according to the corresponding domain words; integrates the local and global representation through gating mechanism to obtain the enhanced character representation, which has …better ability to perceive medical entities. Finally, the model sent the enhanced character representation to the Bi-LSTM and CRF layers for context encoding and tags decoding respectively. The experimental results demonstrate that our model achieves a significant improvement over the best baseline, increasing the F1 values by 1.04% and 0.62% on the IMCS21 and CMeEE datasets, respectively. In addition, we verify the effectiveness of each component of our model by ablation experiments. Show more

Keywords: Named entity recognition, Chinese characters, medical entity, local and global representation

DOI: 10.3233/JIFS-231554

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3779-3790, 2023

Authors: Geng, Xiaona | Geng, Xiaonan

Article Type: Research Article

Abstract: With the continuous deepening of higher education management reform, university leaders have realized that the merger of universities, annual expansion of enrollment, and expansion of educational scale have broadened the development space for universities. At the same time, many management problems have also emerged, and education management problems are particularly prominent, such as some decisions, plans, instructions, etc. of the school level education management department not being well implemented in various departments, and the channels for the school level education management department to understand the true situation of each department are not smooth. Therefore, deepening reform provides a good opportunity …for universities to strengthen management and streamline relationships. Teaching and scientific research must be upgraded, and the quality of teaching management must be improved. Establishing an education management quality evaluation system and emphasizing the quality of education management work are the key. The higher education management quality evaluation is affirmed as multi-criteria group decision-making (MCGDM). Interval-valued neutrosophic sets (IVNSs) have been widely used and researched in MCGDM. The interval-valued neutrosophic sets (IVNSs) could depict the uncertain information within the higher education management quality evaluation. The purpose of this article is to proposed a new improved grey relation analysis (GRA) method based on prospect theory (PT-GRA) to solve the MCGDM under IVNSs. At the end of this paper, an example for higher education management quality evaluation is illustrated through the built method and the comparison. Thus, the main contribution of this study is: (1) the PT-GRA method is used to deal with the MCGDM problems under IVNSs; (2) the weight information is obtained through entropy method; (3) an empirical example for higher education management quality evaluation has been given. (4) some comparative algorithms are given to show the rationality of PT-GRA method with IVNSs. Show more

Keywords: Multi-criteria group decision-making (MCGDM), interval-valued neutrosophic sets (IVNSs), grey relation analysis (GRA), prospect theory (PT), higher education management quality

DOI: 10.3233/JIFS-232146

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3791-3805, 2023

Authors: Sun, Yanling | Liu, Xiaojing | Chen, Haoyue | Zhu, Li | Li, Yingji

Article Type: Research Article

Abstract: Brand authenticity perception is essential for territorial characteristic agricultural product e-commerce studies. From the complexity of consumer perception of brand authenticity, an e-commerce brand authenticity perception (EBAP) analysis model is proposed based on fuzzy cognitive map (FCM) and emotional analysis of online comments. Firstly, LDA model and snowNLP tools extract consumer perception attributes and their emotional inclination. After that, FCM and improved Bonferroni mean (BM) operator are used to accurately analyze the interrelationships between different attributes and comprehensively evaluate the brand authenticity of different enterprises under the same characteristic agricultural product. Finally, the model comparison experiment results show that the …model proposed can reflect the “attribute importance” and “emotional inclination” of the e-commerce brand authenticity perception of territorial characteristic agricultural products. Among them, “platform logistics” and “product benefits” are essential in promoting the authenticity of brand-consumer relationships. Meanwhile, “e-commerce aftersales service” is closely related to the positive evaluation of “platform logistics” and “product benefits.” This study expands the methodical approach to brand authenticity perception research; it provides a valuable reference for developing modern fine granularity management of e-commerce brand authenticity for characteristic agricultural products. Show more

Keywords: E-commerce brand authenticity, emotional analysis, fuzzy cognitive map

DOI: 10.3233/JIFS-230251

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3807-3822, 2023

Authors: Javaid, Sameena | Rizvi, Safdar

Article Type: Research Article

Abstract: Sign language recognition is a significant cross-modal way to fill the communication gap between deaf and hearing people. Automatic Sign Language Recognition (ASLR) translates sign language gestures into text and spoken words. Several researchers are focusing either on manual gestures or non-manual gestures separately; a rare focus is on concurrent recognition of manual and non-manual gestures. Facial expression and other body movements can improve the accuracy rate, as well as enhance signs’ exact meaning. The current paper proposes a Multimodal –Sign Language Recognition (MM-SLR) framework to recognize non-manual features based on facial expressions along with manual gestures in Spatio temporal …domain representing hand movements in ASLR. Our proposed architecture has three modules, first, a modified architecture of YOLOv5 is defined to extract faces and hands from videos as two Regions of Interest. Second, refined C3D architecture is used to extract features from the hand region and the face region, further, feature concatenation of both modalities is applied. Lastly, LSTM network is used to get spatial-temporal descriptors and attention-based sequential modules for gesture classification. To validate the proposed framework we used three publically available datasets RWTH-PHONIX-WEATHER-2014T, SILFA and PkSLMNM. Experimental results show that the above-mentioned MM-SLR framework outperformed on all datasets. Show more

Keywords: C3D, LSTM, manual gestures, non-manual gestures, sign language recognition, YOLOv5

DOI: 10.3233/JIFS-230560

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3823-3833, 2023

Authors: Shi, Qingguo | Hu, Yihuai | Yan, Guohua

Article Type: Research Article

Abstract: The failure mode and effect analysis (FMEA) is an effective tool to analyze risks and potential effects of complex systems, and it is one of the most widely used risk analysis methods for complex systems as there often exists various factors that could affect the operation of the complex systems. Conventional FMEA methods have been limited to using crisp values to represent the assessments, which has been criticized for having many deficiencies. Marine diesel fuel injection system is an important part of marine diesel engine, and its failure could directly affect the performance of the marine diesel engine and even …impact the safe operation of the ship. However, little attention has been paid to the FMEA of the marine diesel fuel injection system. To this end, this paper presents a novel FMEA method based on the best-worst method (BWM) and TOPSIS method with probabilistic linguistic term set (PLTS). Firstly, the PLTS is used to represent the uncertain and linguistic judgments of experts. Then, the BWM is extended with PLTS to determine the weights of different elements for FMEA, and the TOPSIS is extended with PLTS to assess and rank different failure modes. Finally, a case study on marine diesel fuel injection is presented, and the most critical failures are identified for improvement measures. The results show that the proposed method could help managers and engineerings identify the most important failure modes for marine diesel fuel injection system. Show more

Keywords: Failure mode and effect analysis, risk analysis, probabilistic linguistic term set, marine diesel fuel injection system

DOI: 10.3233/JIFS-230870

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3835-3854, 2023

Authors: Kaladevi, P. | Punitha, V.V. | Muthusankar, D. | Praveen, R.

Article Type: Research Article

Abstract: Early detection and classification of breast cancer can be facilitated to initiate the most effective treatment. As the second leading cause of death among women, early breast cancer screening is essential for reducing mortality rates. In this context, Convolutional neural networks (CNNs) are the ideal candidate for increasing the rate of identification and classification of tumours with efficiency, particularly in medical imaging. This research proposes a hybridised CNN with the Orca Predation Optimization Algorithm (OPOA) as a novel classification model for the effective detection of abnormalities in breast cancer diagnosis. Specifically, the OPOA technique is used to determine the optimal …hyperparameter values for the hybrid CNN architecture being deployed. As the pretrained CNN model, the suggested model utilizeds a ResNet50 residual network. It merged OPOA with the ResNet50 residual network to construct the OPOA-ResNet-50 Architecture. The experimental validation of the proposed OPOA-ResNet-50 model utilising the datasets of curated breast imaging subset of DDSM (CBIS-DDSM) shown improved classification accuracy of 99.04%, specificity of 98.56%, and sensitivity of 97.78% in comparison to the baseline techniques. The results also revealed that the proposed under mammographic image analysis society (MIAS) OPOA-ResNet-50 model demonstrated superior classification accuracy of 98.64%, specificity of 98.79%, and sensitivity of 98.82% compared to the benchmarked methods. The adopted OPOA algorithm is determined to achieve more optimal hyperparameter values for the ResNet50 architecture than the comparative algorithms Improved Marine Predator Optimization Algorithm (IMPOA), Whale Optimization Algorithm (WOA), Harris hawk’s optimization (HHO), and gravitational search algorithm (GSA). Show more

Keywords: Deep Learning Architecture, ResNet-50 model, Convolutional neural networks (CNNs), Hyperparameters Optimization, Orca Predation Optimization Algorithm (OPOA)

DOI: 10.3233/JIFS-231176

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3855-3873, 2023

Authors: Mao, Bingbo | Feng, Tao | Su, Hang | Ma, Xicheng

Article Type: Research Article

Abstract: With the continuous extension and deepening of college education reform, the research on the future employment of college students and the evaluation of employment quality has become a major focus topic. The traditional evaluation system for the employment quality of college graduates is relatively outdated and unitary, lacking a vision of the future development status of college graduates, as well as an effective understanding and mastery of the overall feedback and evaluation of the entire employment market for college graduates. Moreover, most colleges and universities mainly focus on the level of competence that college graduates should achieve five years after …graduation from college in terms of talent cultivation goals, The lack of specific evaluation work for long-term employment tracking of graduates has resulted in universities being unable to grasp and understand the degree of fit and matching between the comprehensive abilities of university graduates and the future employment market, and thus unable to provide effective feedback and summary of talent cultivation and innovation strategies. Therefore, it is imperative to comprehensively innovate the employment quality evaluation system and methods for college graduates. The employment quality evaluation of college graduates is a classical multiple attribute group decision making (MAGDM) problems. Recently, the TODIM and VIKOR method has been used to cope with MAGDM issues. The probabilistic linguistic term sets (PLTSs) are used as a tool for characterizing uncertain information during the employment quality evaluation of college graduates. In this manuscript, the probabilistic linguistic TODIM-VIKOR (PL-TODIM-VIKOR) method is built to solve the MAGDM under PLTSs. In the end, a numerical case study for employment quality evaluation of college graduates is given to validate the proposed method. Show more

Keywords: Multiple attribute group decision making (MAGDM), probabilistic linguistic term sets (PLTSs), information entropy, TODIM, VIKOR, employment quality evaluation

DOI: 10.3233/JIFS-231388

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3875-3886, 2023

Authors: Jaikumar, R.V. | Raman, Sundareswaran | Pal, Madhumangal

Article Type: Research Article

Abstract: The picture fuzzy set (PFS) is a more frequent platform for describing the degree of positive, neutral, and negative membership functions that generalizes the concept of fuzzy sets (FSs) and intuitionistic fuzzy sets (IFSs). Neutrality is a crucial component of PFS, and the score function plays a crucial role in ranking the alternatives in decision-making situations. In the decision-making process, some researchers concentrate on the various aggregation operators’ development while ignoring the development of score functions. This factor causes several errors in the existing score function. If there are two separate picture fuzzy numbers (PFNs), there should be two different …scores or accuracy values. Some researchers failed to rank the alternatives when the score and accuracy values for various PFNs were equal. To overcome the shortcomings, we proposed the perfect score function in this paper for ranking PFNs and introduced strong and weak PFSs. The shortcoming of the existing score function in PFNs has been highlighted in this paper. Furthermore, the decision-making approach has been depicted based on the proposed score function, and real-world applications have been shown by ranking the COVID-19 affected regions to demonstrate its efficacy. Show more

Keywords: Decision-making problem, perfect score function, strong perfect score, strong PFS, weak perfect score, weak PFS

DOI: 10.3233/JIFS-223234

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3887-3900, 2023

Authors: Amshi, Ahmad Hauwa | Prasad, Rajesh | Sharma, Birendra Kumar

Article Type: Research Article

Abstract: Throughout history, cholera has posed a public health risk, impacting vulnerable populations living in areas with contaminated water and poor sanitation. Many studies have found a high correlation between the occurrence of cholera and environmental issues such as geographical location and climate change. Developing a cholera forecasting model might be possible if a relationship exists between the cholera epidemic and meteorological elements. Given the auto-regressive character of cholera as well as its seasonal patterns, a seasonal-auto-regressive-integrated-moving-average (SARIMA) model was utilized for time-series study from 2017 to 2022 cholera datasets obtained from the NCDC. Cholera incidence correlates positively to humidity, precipitation, …minimum temperature, and maximum temperature with r  = 0.1045, r  = 0.0175, r  = 0.0666, and r  = 0.0182 respectively. Improving a SARIMA model, autoregressive integrated moving average (ARIMA), and Long short-term memory (LSTM) with the k-means clustering and discrete wavelet transform (DWT) for feature selection, the improved model is known as MODIFIED SARIMA Outperforms the LSTM, ARIMA, and SARIMA and also outperformed both the modified LSTM and ARIMA with an RSS = 0.502 and an accuracy = 97%. Show more

Keywords: Cholera forecasting, SARIMA, K-means clustering, discrete wavelet transform

DOI: 10.3233/JIFS-223901

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3901-3913, 2023

Authors: Zhu, Shuaiwei | Fan, Xiaobin | Qi, Gengxin | Wang, Pan | Chen, Xinbo

Article Type: Research Article

Abstract: Aiming at the problem that the current ABS control algorithm cann’t make full use of the ground braking force to complete the braking when the complex road surface is in emergency braking, the ABS sliding mode variable structure control method based on road surface identification is proposed. Combined with the in-wheel motor of in-wheel motor electric vehicle, a coordinated control method of motor hydraulic composite is designed. Based on the fuzzy logic control method, the road adhesion coefficient is estimated to realize the identification of typical roads and dynamically obtain the optimal slip rate of different roads. The ABS sliding …mode variable structure controller is designed with the optimal slip ratio and the actual slip ratio as input, and the saturation function is used to replace the sign function in the traditional sliding mode variable structure control to weaken the ’ chattering ’ phenomenon in the sliding mode variable structure control, and then the ABS controller is designed. Taking the experimental prototype vehicle driven by four-wheel hub motor as the research object, an eight-degree-of-freedom dynamic simulation model of the whole vehicle is established. Compared with the traditional PID controller, the braking time is shortened by 0.2 s and the braking distance is shortened by 2.3 m, which shows the feasibility of the designed controller. Through the simulation braking experiment of the docking road, the adaptability and real-time performance of the ABS sliding mode controller are verified, and the importance of the road adhesion coefficient identification to the ABS controller is verified. Show more

Keywords: Vehicle engineering, vehicle anti-lock braking system, road identification system, sliding mode control, slip rate

DOI: 10.3233/JIFS-220989

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3915-3928, 2023

Authors: Zhang, Zhuo | Zhang, Ning | Sun, Jing-he | Wang, Jian-ling

Article Type: Research Article

Abstract: Green supplier management (GSM) gained significant importance in addressing environmental concerns, promoting resource efficiency, and enhancing eco-efficiency within the green supply chain system. This study presents a systematic review to provide insights into the current research status and prospects in GSM literature. Results indicate that the research about GSM is gaining consistently growing attention over the past decades. However, there exists a regional imbalance in academic research, with a substantial portion of the authors originating from developing countries in China and India. The topics of green supplier selection and evaluation have received considerable attention in academia. In addition, the multi-attribute …decision-making methods, such as TOPSIS, VIKOR, and AHP, and some mathematical modeling approaches have played a crucial role in the methodology employed for GSM research. As a fundamental algorithm in the artificial intelligence area, fuzzy sets theory has also been extensively employed in supplier selection and evaluation studies, whereas other big data analysis approaches have received little attention. Considering the inherent risks and uncertainties in the business strategy environment and developing more big data and artificial intelligence techniques represent promising avenues for future research in the field. Show more

Keywords: Green supplier management, bibliometric, literature review, green supplier selection and evaluation

DOI: 10.3233/JIFS-222019

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3929-3949, 2023

Authors: Zhao, Jin | Wang, Zhaohan | Jianjun, Zhang

Article Type: Research Article

Abstract: In the Big-data Era, the construction of precise personalized learning evaluation system forms an important part of analyzing learners’ learning behavior and predicting precise personalized learning performance. The CIPP evaluation model is introduced into the precise personalized learning evaluation, and 3 first-level indicators, 9 second-level indicators and 25 third-level indicators are designed to evaluate the learning process in terms of pre-class preview, in-class teaching and after-class consolidation. And then through the application of questionnaire survey, AHP method and fuzzy comprehensive evaluation method, the indicators are condensed and weighted, and the corresponding fuzzy comprehensive judgment matrix is figured out. Finally, a …learning evaluation system for the whole process of precise personalized learning is constructed. An empirical study based on the learning behavior data of a certain number of online learners is carried out to test the value and feasibility of this learning evaluation system. Show more

Keywords: CIPP evaluation model, learning evaluation, precise personalized learning, analytic hierarchy process, fuzzy comprehensive evaluation method

DOI: 10.3233/JIFS-230004

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3951-3963, 2023

Authors: Li, Guo | Geng, Xiuli | Yuan, Yong

Article Type: Research Article

Abstract: Under the COVID-19 pandemic, sports event is facing enormous challenges. Logistics and security are affected seriously. The ability of service suppliers to deal with uncertainty is critical. Considering complex uncertainty, evaluating the service suppliers of sports events is reasonable. This study proposes a new framework for selecting sports suppliers, which combines a hesitant fuzzy set (HFS) and Measurement of Alternatives and Ranking according to the Compromise Solution (MARCOS) method. MARCOS is based on determining the reference values of alternatives about the ideal and is a comprehensively rational and reasonable application methodology. HFS has the advantage of expressing fuzzy and hesitant …evaluation information, which is seldom used in the MARCOS framework. A case study of a sports supplier selection for the 2022 China National Youth U Series Floorball Championship is given to demonstrate the practicability of the proposed approach. Finally, a comprehensive sensitivity analysis is performed to verify the proposed methodology’s stability and effectiveness. Show more

Keywords: Sports suppliers selection, COVID-19, hesitant fuzzy set, MARCOS, multi-criteria decision-making

DOI: 10.3233/JIFS-230601

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3965-3984, 2023

Authors: Barokab, Omar M. | Khan, Asghar | Khan, Sher Afzal | Jun, Young Bae | Rushdi, Ali Muhammad Ali

Article Type: Research Article

Abstract: In comparison to intuitionistic fuzzy set (IFS) and Pythagorean fuzzy set (PFS), the Fermatean Fuzzy Set (FFS) is more efficacious in dealing ambiguous and imprecise data when making decisions. In this paper, we propose unique operations on Fermatean fuzzy information based on prioritized attributes, as well as Einstein’s operations based on adjusting the priority of characteristics in the Fermatean fuzzy environment. We use Einstein’s operations with prioritized attributes to propose new operations on Fermatean fuzzy numbers (FFNs), and then introduce basic aspects of these operations. Motivated by Einstein operations on FFNs, we develop Fermatean fuzzy Einstein prioritized arithmetic and geometric …aggregation operators (AOs). In the first place, the concepts of a Fermatean fuzzy Einstein prioritized average (FFEPA), Fermatean fuzzy Einstein prioritized weighted average (FFEPWA), and Fermatean fuzzy Einstein prioritized ordered weighted average (FFEPOWA)-operators are introduced. Then, Fermatean fuzzy Einstein prioritized geometric (FFEPG) operator, Fermatean fuzzy Einstein prioritized weighted geometric (FFEPWG) operator, Fermatean fuzzy Einstein prioritized ordered weighted geometric (FFEPOWG) operator, and Fermatean fuzzy Einstein hybrid geometric (FFEHG) operator are given. We also go through some of the key characteristics of these operators. Moreover, using these operators, we establish algorithm for addressing a multiple attribute decision-making issue using Fermatean fuzzy data and attribute prioritizing. The case of university faculty selection is taken as a scenario to analyze and demonstrate the applicability of our suggested model. In addition, a comparison of the proposed and current operators is conducted, and the impact of attribute priority on the ranking order of alternatives is explored. Show more

Keywords: MADM, FFE prioritized average (FFEPA) operator, FFE prioritized weighted average (FFEPWA) operator, FFE prioritized ordered weighted average (FFEPOWA) operator, FFE prioritized geometric (FFEPG) operator, FFE prioritized weighted geometric (FFEPWG) operator, FFE prioritized ordered weighted geometric (FFEPOWG) operator

DOI: 10.3233/JIFS-230681

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 3985-4008, 2023

Authors: He, Keke | Tang, Haojun | Gou, Fangfang | Wu, Jia

Article Type: Research Article

Abstract: Artificial intelligence image processing has been of interest to research investigators in tumor identification and determination. Magnetic resonance imaging for clinical detection is the technique of choice for identifying tumors because of its advantages such as accurate localization with tomography in any orientation. Nevertheless, owing to the complexity of the images and the heterogeneity of the tumors, existing methodologies have insufficient field of view and require expensive computations to capture semantic information in the view, rendering them lacking in universality of application. Consequently, this thesis developed a medical image segmentation algorithm based on global field of view attention network (GVANet). …It focuses on replacing the original convolution with a transformer structure and views in a larger field-of-view domain to build a global view at each layer, which captures the refined pixel information and category information in the region of interest with fewer parameters so as to address the defective tumor edge segmentation problem. The dissertation exploits the pixel-level information of the input image, the category information of the tumor region and the normal tissue region to segment the MRI image and assign weights to the pixel representatives. This medical image recognition algorithm enables to undertake the ambiguous tumor edge segmentation task with low computational complexity and to maximize the segmentation accuracy and model property. Nearly four thousand MRI images from the Monash University Research Center for Artificial Intelligence were applied for the experiments. The outcome indicates that the approach obtains outstanding classification capability on the data set. Both the mask (IoU) and DSC quality were improved by 7.6% and 6.3% over the strong baseline. Show more

Keywords: Tumor recognition, image analysis, atention, companion diagnostics, global view

DOI: 10.3233/JIFS-231053

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4009-4021, 2023

Authors: Crnković, Dean | Švob, Andrea

Article Type: Research Article

Abstract: Tolerance graphs were introduced in 1982 by M. C. Golumbic and C. L. Monma as a generalization of interval graphs. In this paper, we introduce tolerance fuzzy graphs as a generalization of tolerance graphs, and apply them to a modeling of a transmission of airborne diseases.

Keywords: tolerance graph, fuzzy graph, random graph, airborne disease

DOI: 10.3233/JIFS-231606

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4023-4029, 2023

Authors: Bipin Nair, B.J. | Shobha Rani, N. | Khan, Mustaqeem

Article Type: Research Article

Abstract: The method for document image classification presented in this paper mainly focuses on six different Malayalam palm leaf manuscripts categories. The proposed approach consists of three phases: dataset analysis, building a bag of words repository followed by recognition and classification using a voting approach. The palm leaf manuscripts are initially subject to pre-processing and subjective analysis techniques to create a bag of words repository during the dataset analysis phase. Next, the textual components from the manuscripts are extracted for recognition using Tesseract 4 OCR with default and self-adapted training sets and a deep-learning algorithm. The Bag of Words approach is …used in the third phase to categorize the palm leaf manuscripts based on textual components recognized by OCR using a voting process. Experimental analysis was done to analyze the proposed approach with and without the voting techniques, varying the size of the Bag of Words with default/self-adapted training datasets using Tesseract OCR and a deep learning model. Experimental analysis proves that the proposed approach works equally well with/ without voting with a bag of words technique using Tesseract OCR. It is noticed that, for document classification, an overall accuracy of 83% without voting and 84.5% with voting is achieved with an F-score of 0.90 in both cases using Teserract OCR. Overall, the proposed approach proves to be high generalizable based on trial wise experiments with Bag of Words, offering a reliable way for classifying deteriorated Malayalam handwritten palm manuscripts. Show more

Keywords: Document image classification, palm leaf manuscripts, handwritten document analysis, Tesseract OCR, deep learning, ancient document images

DOI: 10.3233/JIFS-223713

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4031-4049, 2023

Authors: An, Qing | Gao, Cuifen | Deng, Qian

Article Type: Research Article

Abstract: Due to the corrosion and aging caused by the special oceanic environment, the characteristic of coastal photovoltaic (PV) system significantly drift after years of operation. In this study, the maximum power point tracking (MPPT) problem for coastal PV system is addressed and a novel MPPT methodology based on deep neural network (DNN) integrated with the corrosion evaluation index (CE-index) and dynamic training-sample (DTS) mechanism is developed. To be specific, the detailed effect of corrosion and aging for the PV modules installed in coastal areas is comprehensively analysed, and a composite indicator for evaluating the PV parameter drift, namely CE-index, is …proposed. Then, a novel DNN-based offline MPPT methodology for the large-scale coastal PV system is developed, in which the DTS mechanism is also introduced for overcoming the effect caused by PV module corrosion and aging phenomenon. Finally, the optimal length of DTS for different degrees of CE-index is comprehensively verified by case studies. Experimental result shows that the developed DNN-based MPPT methodology can accurately forecast the maximum power point (MPP) voltage for large-scale coastal PV-system with robust performance, and cooperation of the developed DTS-mechanism and CE-index corrosion evaluation strategy can also effectively overcome the disturbance caused by the harsh oceanic environment. Show more

Keywords: Coastal PV system, PV module corrosion, corrosion evluation, maximum power point tracking, deep neural network

DOI: 10.3233/JIFS-223428

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4051-4070, 2023

Authors: Van Pham, Hai | Thuy, Linh Hoang Thi | Hung, Nguyen Chan | Dich, Nguyen Quang | Ngoc, Son Luong | Moore, Philip

Article Type: Research Article

Abstract: Pedagogic systems are gaining traction in the provision of training, learning, and continuing professional development (often required to maintain professional qualifications). An essential element in pedagogic systems is the matching of teachers (mentors) and students (mentees). In this paper we present an intelligent context-aware learning system based on profile criteria developed using big data analytic solutions. The proposed system is designed to provide systematic support for mentors based on student profiles. The goal of the proposed system is to match the mentor profiles with the type of pedagogic system, the student profile, the student requirements, and the student’s goals and …expectations. The proposed system is predicated on the use of fuzzy logic definitions with a maximal length matching algorithm using expert knowledge. The proposed system implements a mentor (teacher) and mentee (student) matching algorithm based on their profile criteria. The proposed system has been successfully tested by matching mentor and mentee profiles and preferences. Experimental results show that the proposed system can access multi-factorial mentor and mentee profiles, effectively match suitable mentors (teachers) with appropriate mentees (students), and meet the mentee expectations. Show more

Keywords: Mentor, Mentee, Mentoring, context awareness, profile matching, intelligent pedagogic systems

DOI: 10.3233/JIFS-223820

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4071-4087, 2023

Authors: Zhao, Jin | Shi, Liying

Article Type: Research Article

Abstract: This paper uses two optimizers (Improved Gray Wolf Optimizer (I_GWO) and Dragonfly Optimization Algorithm (DA)) for the sensitivity and robustness of artificial intelligence (AI) techniques, namely radial basis functions (RBFs). The purpose is to evaluate and analyze the predictive strength of high-performance concrete (HPC). 170 samples were collected for this purpose. This includes eight input parameters, cement, silica fume, fly ash, water, coarse aggregate, total aggregate, high water reducing agent, concrete age, and one output parameter, the compressive strength, to produce Increase learning and validation data sets. The proposed AI model was validated against several standard criteria: coefficient of determination …(R2), root mean square error (RMSE), scatter index (SI), RMSE-observations standard deviation ratio (RSR), and coefficient of persistence (CP), n10_index. Many runs were performed to analyze the sensitivity and robustness of the model. The results show that I_GWO using RBF performs better than DA. Furthermore, sensitivity analysis indicated that cement content and HPC test age are the most essential and sensitive factors for predicting the compressive strength of HPC, according to the evaluations performed on the models, it was seen that the IGWO_RBF model provided better results compared to other models and can be introduced as the practical model for the prediction of HPC’s CS. In conclusion, this study can help to select appropriate AI models and suitable input parameters to accurately and quickly estimate the compressive strength of HPC. Show more

Keywords: High-performance concrete, compressive strength, improved Grey Wolf optimizer, Dragonfly optimization algorithm, radial basis function

DOI: 10.3233/JIFS-224382

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4089-4103, 2023

Authors: Arukonda, Srinivas | Cheruku, Ramalingaswamy

Article Type: Research Article

Abstract: Disease diagnosis is very important in the medical field. It is essential to diagnose chronic diseases such as diabetes, heart disease, cancer, and kidney diseases in the early stage. In recent times, ensembled-based approaches giving effective predictive performance than individual classifiers and gained attention in assisting doctors with early diagnosis. But one of the challenges in these approaches is dealing with class-imbalanced data and improper configuration of ensemble classifiers with optimized parameters. In this paper, a novel 3-level stacking approach with ADASYN oversampling technique with PSO Optimized SVM meta-model (Stacked-ADASYN-PSO) is proposed. Our proposed Stacked-ADASYN-PSO model uses base models such …as Logistic regression(LR), K-Nearest neighbor (KNN), Support Vector Machine (SVM), Decision Tree (DT), and Multi-Layer Perceptron (MLP) in layer-0. In layer-1 three meta classifiers namely LR, KNN, and Bagging DT are used. In layer-2 PSO optimized SVM used as the final meta-model to combine the previous layer predictions. To evaluate the robustness of the proposed model It is tested on five benchmark disease datasets from the UCI machine learning repository. These results are compared with state-of-the-art ensemble models and non-ensemble models. Results demonstrated that the proposed model performance is superior in terms of AUC, accuracy, specificity, and precision. We have performed statistical analysis using paired T -tests with a 95% confidence level and our proposed stacking model is significantly differs when compared to base classifiers. Show more

Keywords: Disease diagnosis, particle swarm optimization, oversampling, stacking, class imbalance, ensemble

DOI: 10.3233/JIFS-232268

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4105-4123, 2023

Authors: Chen, Jilan

Article Type: Research Article

Abstract: The vast usage of concrete made it the second most used material after water. This volume of concrete consumes an enormous number of natural sources and chronically enhances environmental pollution by CO2 emission. Cementitious supplementary materials such as fly ash and micro silica help decrease the usage of cohesive materials in the concrete and improve concrete’s properties, specifically compressive strength. In addition, due to being the by-product materials of other industries, applying these materials contribute to the decline of environmental pollution. On the other hand, fly ash and micro silica decrease the ratio of water to cement and increase the …compressive strength (CS) of concrete. High-Performance Concrete (HPC) is one of the types of concrete used in dams, bridges, etc. In order to achieve the compressive strength of HPC, it is necessary to conduct laboratory tests, which are not economical in terms of time and cost. For this reason, in the present study, the prediction of the CS of the mentioned concrete can be done based on soft-based and artificial intelligence. Furthermore, various mixed designs of HPC, such as fly ash and silica fume coupled with different percentages of plasticizers, are considered the base dataset for developing the prediction models. Neural network-based model hybridized with antlion optimization algorithm and biography-based optimization algorithm developed for compressive strength estimation. The result showed that the AMLP-I model with R2 and RMSE values of 0.9879 and 1.9003 accurately predicted compressive strength and can be referred to as the most qualitative prediction model compared to the BMLP model. Show more

Keywords: Compressive strength, high-performance concrete, antlion optimization, biography-based optimization, artificial neural network

DOI: 10.3233/JIFS-221544

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4125-4138, 2023

Authors: Huo, Xiaoyan

Article Type: Research Article

Abstract: Automated visual inspection on PCB boards is a critical process in electronic industries. Misalignment component detection is one of the challenging tasks in the PCB inspection process. Defects during the production process might include missing and misaligned components as well as poor solder connections. Inspection of PCB is therefore required to create practically defect-free products. There are various methods have been developed to perform this task in literature. The significance of this research is to propose an efficient with low-cost system is still require in small scale manufacturing to perform the misalignment or missing component detection on PCB boards. However, …an efficient, low-cost system is still required in small-scale manufacturing to perform the misalignment or missing component detection on PCB boards. In this study, a real-time visual inspection system is developed for misalignment component detection. The proposed system consists of hardware and software frameworks. The hardware framework involves the setup of devices and modules. The software framework is composed of pre-processing and post-processing. In pre-processing, image enhancement is applied to remove noises from captured images and You Only Look Once (YOLO) object detector for components detection. Subsequently, the detected components are compared to the corresponding defined pattern using a template-matching algorithm. As experimental shown, the proposed system satisfies the requirement of missing component detection on PCB boards. Show more

Keywords: Surface defect detection, visual inspection, PCB, YOLO, fuzzy logic

DOI: 10.3233/JIFS-223773

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4139-4145, 2023

Authors: Yadav, Shilpi | Patel, Raj K. | Singh, Vijay P.

Article Type: Research Article

Abstract: The study introduces a novel approach to classify faulty bearings using a combination of the Teager-Kaiser Energy Operator (TKEO) and Artificial Intelligence. The TKEO signal is used for statistical feature extraction to distinguish between healthy and abnormal bearings and two datasets were used to evaluate the proposed method. Total 11 statistical features were extracted from the raw and processed signals using the TKEO operator. The obtained feature set was used as input for various machine learning algorithms, and their performance was compared. Additionally, statistical features were calculated using the Hilbert Transform and compared to the proposed method. The study found …that when the TKEO features were used as input for the classifier in the acoustic signal, the CART model achieved the highest accuracy of 99.62% compared to the raw and Hilbert transform signal features. In the case of vibration signals, the TKEO signal feature outperformed the raw signal feature with 100% accuracy for all artificial intelligence models. The proposed methodology revealed that using TKEO signal features as input significantly enhanced the classification accuracy. Show more

Keywords: Statistical feature, hilbert transform, TKEO, artificial intelligence, CART

DOI: 10.3233/JIFS-224221

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4147-4164, 2023

Authors: Zhu, Yinghui | Jiang, Yuzhen

Article Type: Research Article

Abstract: This article has been retracted. A retraction notice can be found at https://doi.org/10.3233/JIFS-219433 .

DOI: 10.3233/JIFS-230517

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4165-4177, 2023

Authors: Zheng, Yue | Xing, Cheng | Wang, Jie-Sheng | Song, Hao-Ming | Bao, Yin-Yin | Zhang, Xing-Yue

Article Type: Research Article

Abstract: The reptile search algorithm (RSA) is a dynamic and effective meta-heuristic algorithm inspired by the behavior of crocodiles in nature and the way of hunting prey. Unlike other crawler search algorithms, it uses four novel mechanisms to update the location of the solutions, such as walking at high or on the belly, and hunting in a coordinated or cooperative manner. In this algorithm, the total number of iterations is divided into four intervals, and different position-updating strategies are used to make the algorithm easily fall into the local optimum. Therefore, an improved reptile search algorithm based on a mathematical optimization …accelerator (MOA) and elementary functions is proposed to improve its search efficiency and make it not easily fall into local optimum. MOA was used to realize the switching of RSA’s four searching modes by introducing random perturbations of six elementary functions (sine function, cosine function, tangent function, arccosine function, hyperbolic secant function and hyperbolic cosecant function), four mechanisms are distinguished by random number instead of the original RSA algorithm’s inherent four mechanisms by iteration number, which increases the randomness of the algorithm and avoids falling into local optimum. The random perturbations generated by elementary functions are added to the variation trend of parameter MOA to improve the optimization accuracy of the algorithm. To verify the effectiveness of the proposed algorithm, 30 benchmark functions in CEC2017 were used for carrying out simulation experiments, and the optimization performance was compared with BAT, PSO, ChOA, MRA and SSA. Finally, two practical engineering design problems are optimized. Simulation results show that the proposed sechRSA has strong global optimization ability. Show more

Keywords: Reptile search algorithm, mathematically optimized accelerator, elementary function, function optimization, engineering optimization

DOI: 10.3233/JIFS-223210

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4179-4208, 2023

Authors: Cai, Huiwang | Luan, Ji | Zhou, Changlin | Zhang, Ji | Ma, Lu

Article Type: Research Article

Abstract: High-performance concrete (HPC) is one of the most important elements in constructing bridges, skyscrapers, and dams. This concrete additive plays a very important role in performance and response to inflow loads such as earthquakes and dead loads. Fly ash (Fa) and Micro-silica (Ms) are additives added to concrete by cement to reduce water to cement. Increase the ratio and increase the hardening of the cement. This will improve the compressive strength (Cs) of the concrete. Modeling is required for this type of structure. The radial basis function (RBF) is one of the models that can produce better and more rational …results. This model combines two optimizers, the Sine Cosine Algorithm (SCA) and the Artificial hummingbird algorithm (AHA), in the framework of RBF-SCA and RBF-AHA, which are considered to be new and effective initiatives in the field of algorithms. The lowest amount of error parameters contains: (RMSE = 2.58), (NMSE = 6.59), and (U95 = 7.16) for RBF-AHA in the train section and the test section (MBE = – 0.1929). The (Tstate = 0.285) in the train section of the RBF-SCA has the lowest compared to another section. RBF-AHA has the highest R2 value of 97.15% in the training area. Both hybrid models can have the desired error and the correct percentage based on the given output. However, the RBF-AHA model may look more powerful in this modeling. Show more

Keywords: High-performance concrete, compressive strength, radial basis function, artificial hummingbird algorithm, sine cosine algorithm

DOI: 10.3233/JIFS-224343

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4209-4221, 2023

Authors: Wu, Cuiling | Duan, Xiaodong | Ning, Tao

Article Type: Research Article

Abstract: Machine vision-based semi-automatic sorting in parcel sorting relies on specific sensors to read form information and synchronize it to the control system to complete a sort. The cost of traditional Faster RCNN parameter calculation is high, and the requirements for hardware equipment are high. In order to reduce the consumption of hardware resources and improve efficiency, we redesigned the traditional Faster RCNN to reduce the hardware cost requirements. The number of categories in package data sets varies greatly, and category imbalance is also one of the problems. To solve the express parcel category imbalance problem, an adaptive Mosaic method is …proposed to improve the recognition accuracy of fine-grained similar parcels. To be deployed on edge devices with limited computational resources, a new lightweight network, Reparameterization Large Depthwise conv Normalization-based Attention (ReLDWNAM), is proposed. The experimental results show that compared with MobileNetV2, the number of parameters is reduced by 3.07M, and the computing resources are reduced by more than twice, 10 times faster time for feature extraction network, and more than double the overall detection speed of Faster RCNN with little difference in accuracy. Show more

Keywords: Parcel detection, form recognition, Mosaic method, faster RCNN

DOI: 10.3233/JIFS-230255

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4223-4238, 2023

Authors: Zhou, Shaoling | Tan, Xiaoman | Wang, Xiaosheng

Article Type: Research Article

Abstract: Uncertain differential equations are widely used in the fields of finance, chemistry, and so forth. In this paper, the problem of parameter estimation in uncertain differential equations is discussed. The trapezoidal scheme is derived to approximate the uncertain differential equations, then a difference scheme named the composite Heun scheme is proposed to obtain the difference equations of uncertain differential equations. The method of moments based on the composite Heun scheme is given to estimate the parameters in uncertain differential equations. Several examples are used to illustrate the viability of the composite Heun scheme.

Keywords: Composite Heun scheme, uncertain differential equation, method of moments, parameter estimation

DOI: 10.3233/JIFS-230288

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4239-4248, 2023

Authors: Yang, Wenguang | Ren, Baitong | Xu, Bingbing | Pang, Xiaona | Liu, Ruitian

Article Type: Research Article

Abstract: In this study, a novel approach based on the reduction of the attribution and the rank preservation is analyzed, which intends to solve the issue of multi-attribute decision making (MADM) with the hesitant fuzzy information. Firstly, several new concepts are shown to simplify the representation of hesitant fuzzy information, such as single point fuzzification estimated value, and single point fuzzification weighted Euclidean distance. Secondly, a new improved HF-TOPSIS method based on the overall situation and these new concepts are put forward, in which the positive and negative ideal solutions are fixed to calculate the complex hesitant fuzzy decision process. The …proposed method in this paper achieves the purpose of compression of the complex hesitant fuzzy information, and the calculation is relatively simple and easy to operate. Finally, two examples are presented to test and verify the credibility and effectiveness of the TOPSIS-Based rank preservation approach, which can achieve the consistency of results before and after evaluation, as well as ensuring rank preservation, while other HF-TOPSIS methods may cause rank reversal problems. Show more

Keywords: Rank preservation, TOPSIS, MADM, hesitant fuzzy set, single point fuzzification

DOI: 10.3233/JIFS-230713

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4249-4260, 2023

Authors: Sugumaran, V.R. | Rajaram, A.

Article Type: Research Article

Abstract: This paper focuses on achieving high-level security in Mobile Adhoc Networks (MANET) by incorporating Blockchain technology-based Intrusion Detection systems (IDS). The existing works on MANET security focus on either security prevention or detection. Thus, the security level attained by the prior works is unable to cope with the increasing attacks. To resolve this main issue, this research paper introduces Lightweight Blockchain assisted Intrusion Detection System (LB-IDS) which jointly prevents and detects the attacks held on mobile networks. Initially, the network nodes are authenticated by a lightweight Blockchain-based Multi-Factor Authentication (LBMFA) scheme. This procedure prevents the malicious nodes entry to the …network. Then, data packets are transmitted through the optimal route which is selected by Multi-Objective Strawberry Optimization (MOSO) algorithm. The collected data packets are fed into IDS which classifies the data into normal and malicious packets. For IDS, we proposed Deep Q-Learning (DQL) algorithm which takes actions by learning the environment. As the mitigation step, the Blockchain is updated with the trust value according to the data packet classification. For such continuous monitoring, K-Mode Clustering (KMC) algorithm is proposed. On the whole, the proposed work improves the network security in MANET through Prevention, Detection, and Mitigation. The results of the presented work attains better security level, packet delivery ratio (PDR), energy efficiency, delay, and detection accuracy. Show more

Keywords: Blockchain, Mobile Adhoc Network (MANET), Deep Q-Learning (DQL), energy efficient, security

DOI: 10.3233/JIFS-231340

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4261-4276, 2023

Authors: Liu, Anlei | Ma, Xun | Jia, Xuchao | Liu, Kai | Ji, Ming | Feng, Jian | Wang, Junlong

Article Type: Research Article

Abstract: In order to ensure the efficiency of power user’s requirements processing, an automatic classification method for demand test of power users based on parallel naive Bayesian algorithm is proposed. Polynomial naive Bayes is selected to build Hadoop cluster, and the feature words of power user’s requirements are selected through chi square test. The weight of each feature item is calculated by word frequency-inverse text frequency index method, and the weight sum of each category is calculated. The weight sum is input into naive Bayes algorithm to output the text classification results of power user’s requirements. At the same time, The …naive Bayes classification algorithm is parallelized and encapsulated to reduce the cost of data movement and exchange in the classification process, and improve the operation efficiency of demand text classification of power user. The experimental results show that this method can accurately extract the feature words of power user’s requirements, effectively realize the automatic classification of power user’s requirements text, and have a more accurate classification effect. The average fitness value of the proposed method tends to be stable after more than 20 training times, and the number of network convergence steps is 7. When the ratio of energy function is about 0.4 and 0.6, the average IU value is the highest. When the required number of texts ranges from 500 to 1500, the delay time of text classification is 0.02 s, and the peak signal-to-noise ratio is more than 33, among which the highest peak signal-to-noise ratio is 42.52, and the normalization coefficient is 1. Show more

Keywords: MapReduce, Naive Bayes, power user’s requirements, automatic text classification, parallel processing

DOI: 10.3233/JIFS-224170

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4277-4289, 2023

Authors: Cui, Zheng | Li, Xiaoqi | Guo, Jie | Lu, Yunhang

Article Type: Research Article

Abstract: Basketball has always been a relatively hot sport. However, the level of basketball in China does not maintain the synchronous development trend with competitive sports, which can be seen from the achievements of various international competitions. Many basketball players have retired due to sports injuries. How to avoid and delay the occurrence of injuries to the maximum extent, and make the best competitive state to get the longest time is an urgent problem to be solved in the current basketball training and competition process. Therefore, how to reduce sports damage in basketball sports has become a crucial problem. The …artificial neural network algorithm is widely used in complex system hardware fault detection, medical diagnosis, medical image processing and other complex task, to classify and forecast, and achieved good results. But in the use of the sports injury risk prevention is very limited, in sports injury risk early warning research, predecessors to sports injury factors made a lot of research and the qualitative model was established, but no quantitative evaluation research, and artificial neural network algorithm has good performance in complex system classification and prediction, so the artificial neural network algorithm is applied to sports injury risk early warning study is a very meaningful work, can carry on the accurate to the athlete sports injury risk assessment. Using RBF neural network to achieve dimensional reduction preprocessing of high-dimensional data not only has sufficient theoretical basis, but also it is more superior. Based on the optimization study of RBF neural network algorithm, we study the data-based feature selection RBF neural network, and apply it in the high-dimensional multi-objective optimization decision space and pare to quality and disadvantages prediction. Through the evaluation of the test sample, the early warning model achieves ideal results, so it is feasible to apply to the sports injury risk warning. Show more

Keywords: Keywords. Basketball, RBF neural network algorithm, sports injury early warning, athletes

DOI: 10.3233/JIFS-224601

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4291-4300, 2023

Authors: Li, Hao | Niu, Haisha | Zhang, Yong | Yu, Zhengxian

Article Type: Research Article

Abstract: Traditional mechanical models and sensors face challenges in obtaining the dynamometer diagram of the sucker rod pump system (SRPS) due to difficulties in model solving, high application costs, and maintenance difficulties. Since the electric motor powers the SRPS, its power output is highly correlated with the working state of the entire device. Therefore, a hy-brid method based on electric motor power and SPRS mechanical parameter prediction is proposed to predict the dyna-mometer diagram. First, a long short-term memory neural network (LSTM) is used to establish the LSTM-L model for predicting the dynamometer load based on electric motor power. Then, a …mathematical and physical calculation model (FLM-D) of the dynamometer diagram displacement at the hanging point is constructed by combining the four-bar linkage structure of the sucker rod pump. Finally, the experimental production data of oil wells are collected through an edge computing device to verify the prediction performance of the LSTM-L&FLM-D hybrid model. Experimental results show that the proposed LSTM-L&FLM-D model has a high fitting degree of 99.3%, which is more robust than other models considered in this study, and exhibits better generalization ability. Show more

Keywords: Long-short term memory neural network, dynamometer diagram, indirect measurement, edge computing

DOI: 10.3233/JIFS-230253

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4301-4313, 2023

Authors: Guo, Fu-Jun | Sun, Wei-Zhong | Wang, Jie-Sheng | Zhang, Min | Hou, Jia-Ning | Song, Hao-Ming | Wang, Yu-Cai

Article Type: Research Article

Abstract: Dealing with classification problems requires the crucial step of feature selection (FS), which helps to reduce data dimensions and shorten classification time. Feature selection and support vector machines (SVM) classification method for banknote dirtiness recognition based on marine predator algorithm (MPA) with mathematical functions was proposed. The mathematical functions were mainly used to improve the optimizatio of MPA for feature parameter selection, and the loss function and kernel function parameters of the SVM are optimized by slime mold optimization algorithm (SMA) and marine predator algorithm. According to the experimental results, the accuracy of identifying dirtiness on the entire surface of …the banknote reaches 89.07%. At the same time, according to the image pattern distribution of the banknoteS, the white area image in the middle left of the collected banknote is selected by the same method to select the feature parameters and identify the dirtiness of the banknoteS. The accuracy of dirtiness recognition in the middle left white area reached 86.67%, this shows that the white area in the middle left can basically completely replace the entire banknote. To confirm the effectiveness of the feature selection method, the proposed optimization method has been compared with four other swarm intelligent optimization algorithms to verify its performance. The experiment results indicate that the enhanced strategy is successful in improving the performance of MPA. Moreover, the robustness analysis proves its effectiveness. Show more

Keywords: Banknote dirtiness, marine predator algorithm, feature selection, mathematical function, support vector machine

DOI: 10.3233/JIFS-230459

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4315-4336, 2023

Authors: Ye, Qiang | Zhang, Juwei | Chen, Quankun

Article Type: Research Article

Abstract: Different number of broken wires produce different grooves on the surface of steel wire rope. Based on the local structural features of these grooves, a new broken wire identification method is proposed. By comparing the processing effects of various image enhancement methods, a processing method called adaptive histogram equalization is selected to process the broken wire image. Aiming at a large amount of useless information in structural features extracted by HOG algorithm, a encoder-decoder neural network is designed to reduce the dimension of features. In addition, to effectively avoid information loss caused by the output layer of the BP neural …network, a joint algorithm of the BP neural network and the support vector machine is proposed. The experimental results show that using image enhancement technology to process broken wire images can effectively improve the recognition rate of broken wires; The structural features extracted by HOG algorithm are more beneficial to the quantitative recognition of broken wires than the texture features extracted by LBP operator; Compared with various dimensionality reduction methods, neural network can retain more effective information; The joint algorithm can improve the recognition rate of broken wire by at least 0.25% on the basis of BP neural network. Show more

Keywords: Steel wire rope, neural network, HOG, support vector machine

DOI: 10.3233/JIFS-231259

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4337-4347, 2023

Authors: Dingjun, He | Liang, Xu | Hui, Yang

Article Type: Research Article

Abstract: Box girders are commonly utilized in bridge engineering because of their economical and visually appealing form. Due to recent advancements in the design sector. However, safety in the economy is the fundamental demand of the current generation, therefore, it is vital to pick an optimal design. Prestrained concrete is used for large-span bridges. Standard heuristic optimization is frequently used to do structural optimization because of how complex structural concerns remain. However, traditional heuristic optimization still takes a significant amount of time. Particle Swarm trained Hierarchically Stepped Adversarial Networks (PS-HSAN) are presented as an alternative approach to speeding up the optimization …of complex problems, and their use reduces the cost of computation for optimization. To find the best design for “a three-span continuous box-girder pedestrian bridge, this research” will apply both classical heuristic optimization and PS-HSAN. This will include analyzing and assessing a variety of crime types and sample sizes. Particle swarm optimization is shown to be as effective as conventional heuristic optimization but with significant time savings. Therefore, using a PS-HSAN in structural design challenges provides an original method for handling certain structural difficulties that need a great degree of computing power while simplifying the solution of other problems. Show more

Keywords: Box girder bridge, Particle Swarm trained hierarchically stepped adversarial networks (PS-HSAN), Particle swarm optimization, structural optimization, the optimal solution

DOI: 10.3233/JIFS-231309

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4349-4360, 2023

Authors: Xia, Zhile | Mou, Jinping

Article Type: Research Article

Abstract: In this paper, the containment control problem of second-order nonlinear heterogeneous multi-agent system is studied. In order to deal with complex uncertainties such as unknown parts, uncertainties, and input constraints in the system, we designed a distributed fuzzy adaptive controller. The interval type-II (IT2) fuzzy set is adopted to deal with the uncertainty of membership functions. We construct a matrix equality and a matrix inequality to deal with the asymmetric Laplace matrix. The controller designed is simple and the designed controller only uses the information of itself and its neighbors. Therefore, it is very easy to be compensated in practice. …Finally, a simulation example is introduced to verify the effectiveness of the proposed methods. Show more

Keywords: Containment problem, fractional-order systems, heterogeneous multi-agent systems, distributed type-II fuzzy adaptive controller

DOI: 10.3233/JIFS-231350

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4361-4370, 2023

Authors: Pushpa, M. | Sornamageswari, M.

Article Type: Research Article

Abstract: The requisite of detecting Autism in the initial stage proposed dataset is exceptionally high in the recent era since it affects children with severe impacts on social and communication developments by damaging the neural system in a broader range. Thus, it is highly essential to identify this Autism in the primary stage. So many methods are employed in autism detection but fail to produce accurate results. Therefore, the present study uses the data mining technique in the process of autism detection, which provides multiple beneficial impacts with high accuracy as it identifies the essential genes and gene sequences in a …gene expression microarray dataset. For optimally selecting the genes, the Artificial Bee Colony (ABC) Algorithm is utilized in this study. In contrast, the feature selection process is carried out by five different algorithms: tabu search, correlation, information gain ratio, simulated annealing, and chi-square. The proposed work utilizes a hybrid Extreme Learning Machine (ELM) algorithm based Adaptive Neuro-Fuzzy Inference System (ANFIS) in the classification process, significantly assisting in attaining high-accuracy results. The entire work is validated through Java. The obtained outcomes have specified that the introduced approach provides efficient results with an optimal precision value of 89%, an accuracy of 93%, and a recall value of 87%. Show more

Keywords: Autism, data mining, gene expression, gene selection, hybrid classifier

DOI: 10.3233/JIFS-231608

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4371-4382, 2023

Authors: Prasad, Padavala Sai | Nair, Prabha Shreeraj | Patil, Anagha | Patil, Nilesh Madhukar | Chaturvedi, Abhay | Taqui, Syed Noeman | Almoallim, Hesham S. | Alharbi, Sulaiman Ali | Raghavan, S.S.

Article Type: Research Article

Abstract: For many, Covid-19 is a short-term, mildly debilitating disease. But some people are still struggling with monthly symptoms with persistent inflammation, chronic pain and shortness of breath. The situation of “long-term cowardice” has become so debilitating that it is now common for some to say that they are tired even if they walk a short distance. So far, the focus has been on saving lives from the plague. But now there are growing concerns about people facing the long-term consequences of the COVID epidemic. The fundamental question, with the uncertainty of whether those with chronic goiter, or all those affected, …will fully recover is raised. In this paper a smart monitoring model was proposed to keep monitoring the COVID patient’s health conditions. The smart method keep on watching the different changes reflected in the body conditions and ensure the changes in the database. In case any emergency is raised, then these smart monitoring tools inform the information to the doctors. This can very much helpful for the patients to communicate with the doctors. Show more

Keywords: Health care, inflammation, chronic pain, long-term consequences, COVID epidemic

DOI: 10.3233/JIFS-231899

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4383-4393, 2023

Authors: Dou, Weiwei

Article Type: Research Article

Abstract: The so-called “college English” teaching quality evaluation is to provide a basic, comprehensive, and realistic evaluation of the relevant aspects and management of teaching implementation on the basis of following the general laws of higher education; It is a comprehensive inspection of “College English” teaching and an important means of quality monitoring and policy adjustment for “College English”. As mentioned earlier, teaching evaluation is a comprehensive evaluation of teaching. Therefore, our evaluation of the quality of university public education is actually an examination of our specific measures in evaluating teaching, teaching methods and methods, teaching literature, and other aspects. The …college public English teaching quality evaluation is a classical multiple attribute decision making (MADM). In this paper, we define the triangular Pythagorean fuzzy sets (TPFSs) and investigate the MADM problems under TPFSs. Based on the traditional dual generalized weighted Bonferroni mean (DGWBM) operator and dual generalized weighted geometric Bonferroni mean (DGWGBM) operator, some triangular Pythagorean fuzzy operators are proposed: triangular Pythagorean fuzzy DGWBM (TPFDGWBM) operator and triangular Pythagorean fuzzy DGWGBM (TPFDGWGBM) operator. Accordingly, we have took advantage of these operators to develop some approaches to work out the triangular Pythagorean fuzzy MADM. Ultimately, a practical example for college public English teaching quality evaluation is took advantage of to validate the developed approach, and an influence analysis of the parameter on the final results is been presented to attest its availability and validity. Show more

Keywords: Multiple attribute decision making (MADM), Triangular Pythagorean fuzzy set, Dual generalized weighted Bonferroni mean (DGWBM) operator, Dual generalized weighted geometric Bonferroni mean (DGWGBM) operator, English teaching quality evaluation

DOI: 10.3233/JIFS-232581

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4395-4414, 2023

Authors: Shi, Huanyu | Li, Ning | Liu, Yinuo

Article Type: Research Article

Abstract: In the wake of the wide promotion of 5G network, the era of super-high-speed networks and the Internet of Everything is approaching. Combining digital technologies led by 5G with landscape architecture has become an important way for the sustainable development of garden ecology. In order to achieve refined management of gardens and improve the accuracy and consistency of garden environmental data monitoring, this study constructs a new IoT sensor multi data fusion algorithm model. Considering the high redundancy and large error data collected by multiple sensors, this paper proposes a multi data fusion algorithm based on adaptive trust estimation and …improved D-S evidence theory. The experimental data demonstrates that matched with IGA-BP, algorithm in this paper obtained the largest fitness value and the fastest convergence speed in three sensor application scenarios with different numbers of nodes. The lowest values were obtained in terms of unit energy consumption and network latency indicators. In the monitoring experiment for environmental data of landscape architecture, the algorithm obtained lower relative error and mean square error than IGA-BP in four environmental parameters of temperature, humidity, light intensity and carbon dioxide concentration. Therefore, the algorithm is effective in real-time monitoring of landscape garden environmental data, and can provide decision-making data for garden management as a reference. Show more

Keywords: 5G, sensor, multi-data fusion algorithm, internet of things, landscape architecture

DOI: 10.3233/JIFS-223961

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4415-4425, 2023

Authors: Kumar, Amit | Dhiman, Pooja

Article Type: Research Article

Abstract: The reliability of an industrial system plays a significant role in new technological era where everyone is concerned about the performance of associated industry. With the frequent demands of the customers, the job of the production industries becomes more tedious to produce the required products at a high rate. To fulfill the customer’s demand, the initial focus of the industries is to work well without any interruption/failure in the entire production process. In this paper, Reliability, Availability, MTTF, MTTR, MTBF, ENOF is proposed for an industrial system namely “Injection moulding machine”. For this, the membership function for right triangular generalized …fuzzy numbers (RTrGFN) is proposed with the certain level of confidence. The real data of the Injection moulding machine is taken to validate the proposed methodology. The input data is extracted from the records/maintenance sheets of several years and found uncertainty due to the loss of any information or human mistakes. The parameters of the system like failure rate and repair time is retrieved. Based on data, AND-OR combination for the system is constructed. The lambda-tau methodology along with RTrGFN and its corresponding arithmetic operations is used for the performance analysis of the considered “Injection moulding machine”. For better understanding the results are discussed with the aid of graphs. Also after seeing the result one can conclude that this methodology is one of the best methodology for the performance analysis of a conventional system. Also authors have added the highlights and future scope of the research work at the end of the manuscript. Show more

Keywords: Reliability indicators, right triangular generalized fuzzy number, alpha cuts, injection moulding machine

DOI: 10.3233/JIFS-224022

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4427-4445, 2023

Authors: Karunanidhi, Bavithra | Ramasamy, Latha | Sathiasamuel, Charles Raja | Manivannan Sudha, Vasanth

Article Type: Research Article

Abstract: Among the list of reliability issues in Photovoltaic (PV) systems, partial shading is one of the crucial issues that affect the row current creating a wide range of current differences between rows these results in reduced output power and panel life span by creating hotspots. It also creates difficulty in tracking the power, because of multiple hotspot peaks obtainable in PV and IV (Current-Voltage) curves. Physical relocation of panels during shade occurrence is not an encouraging solution because of rooftop solar and domestic PV systems, where the area for PV installation is a ceiling. The optimization-based controller is retrofitted for …the electrical relocation of panels. It is developed based on the Cuckoo Search Algorithm (CSA), which aims to reduce the row current difference with a minimum reposition of panels as constraints. For the 9*9 PV arrangement, the row current ranges from 3.747 A to 8.424 A. It is reduced and almost made zero. Hence, the Fill factor raises from 38.073 to 51.707%. The power output is enhanced by about 20%. To prove the algorithm’s novelty a shading case for 4*3 asymmetric array arrangement is also considered for simulation studies. The proposed system proves to be economically beneficent for PV users. The performance of CSA is compared with PSO, Skyscraper, and SuDoKu. An economic analysis is carried out that adds the PV efficiency value to the proposed CSA algorithm. The real-time experimental validation holds good for 3*3 solar array agreement with theoretically simulated results. Show more

Keywords: Optimization-based shade dispersion controller, Cuckoo Search Algorithm, power output enhancement, fill factor, mismatch losses

DOI: 10.3233/JIFS-224137

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4447-4468, 2023

Authors: Huang, Ke | Zhang, Limin

Article Type: Research Article

Abstract: In the construction process, wearing a safety helmet is an important guarantee for personnel safety. However, manual detection is time-consuming, labor-intensive, and unable to provide real-time monitoring. To address this issue, a helmet-wearing detection algorithm has been proposed based on YOLOv5s. The algorithm uses the YOLOv5s network and introduces the CoordAtt coordinate attention mechanism module into its backbone to consider global information and improve the network’s ability to detect small targets. To improve feature fusion, the residual block in the backbone network has been replaced by a Res2NetBlock structure. The experimental results show that compared to the original YOLOv5 algorithm, …the accuracy and speed of the self-made helmet data set have improved by 2.3 percentage points and 18 FPS, respectively. Compared to the YOLOv3 algorithm, accuracy and speed have improved by 13.8 percentage points and 95 FPS, respectively, resulting in a more accurate, lightweight, efficient, and real-time helmet-wearing detection. Show more

Keywords: Helmet wearing detection, YOLOv5s, CoordAtt, Res2NetBlock

DOI: 10.3233/JIFS-230666

Citation: Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4469-4482, 2023