Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Zeverdegani, Sara Karimia; 1 | Mohebian, Zohrehb; *
Affiliations: [a] Department of Occupational Health Engineering, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran | [b] Department of Occupational Health Engineering, Student Research Committee, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran
Correspondence: [*] Correspondence to: Zohreh Mohebian, Ph.D student, Department of Occupational Health Engineering,Student Research Committee, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran. E-mail: [email protected]; ORCID: 0000-0002-8255-786X.
Note: [1] ORCID: 0000-0002-3859-839X
Abstract: BACKGROUND:Nail salon technicians are susceptible to potential exposure to a diverse array of hazardous chemicals in the form of dust or vapors. One of the main routes of exposure is dermal contact. OBJECTIVE:The aim of present study was to health risk assessment of dermal exposure to dust containing heavy metals in nail salon technicians. METHODS:Dust sampling was done on the work surface of 20 available nail salon technicians. The concentration of five metals including cadmium, lead, chromium, nickel, and manganese were determined using ICP-MS. Afterwards, the United States Environmental Protection Agency (USEPA) guideline was used to estimate the potential health risks, including carcinogenic and non-carcinogenic risks, associated with the analyzed metals. RESULTS:Results indicated the mean concentrations of Pb, Cd, Ni, Cr and Mn were 0.7953±0.4373, 0.0952±0.0264, 0.7666±0.8629, 0.4900±0.5994 and 1.134±0.4736, respectively. The hazard quotient (HQ) of all metals was within the permissible value, while hazard index (HI) was greater than 1. The probability of cancer risk (CR) resulting from dermal exposure to Ni, Cd and Cr exceeded the acceptable risk levels (10-6–10–4), but CR calculated for Pb was less than allowable value. CONCLUSION:Implementation of engineering controls such as downdraft vented nail tables and portable source capture systems is necessary. Besides, the use of personal protective equipment such as disposable nitrile gloves, N95 respirator masks, and ensuring proper training on safe work practices is recommended.
Keywords: Health risk assessment, dermal exposure, nail technicians, heavy metals, average daily dose, hazard quotient
DOI: 10.3233/WOR-230336
Journal: Work, vol. 78, no. 4, pp. 1069-1079, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]