Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Soltanzadeh, Ahmada | Mahdinia, Mohsena | Nikbakht, Nedab | Hosseinzadeh, Kianac | Sadeghi-Yarandi, Mohsend; *
Affiliations: [a] Department of Occupational Health and Safety Engineering, Faculty of Health, Qom University of Medical Sciences, Qom, Iran | [b] Department of Mechanical, Industrial and Aerospace Engineering, Gina Cody School of Engineering and Computer Science, Concordia University, Montreal, Canada | [c] Department of Occupational Health and Safety Engineering, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran | [d] Department of Occupational Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
Correspondence: [*] Address for correspondence: Mohsen Sadeghi-Yarandi, Department of Occupational Health Engineering, School of Public Health, Tehran University of Medical Sciences, P.O. Box: 37156-14566, Tehran, Iran. Tel.: (+98) 9120872898; E-mail: [email protected], ORCID ID: 0000-0002-2512-8591.
Abstract: BACKGROUND:The hazardous material release has frequently occurred worldwide. As a respiratory stimulant and a toxic substance, ammonia has numerous adverse effects on human health. OBJECTIVE:The purpose of this study was to evaluate the human vulnerability and toxic effects of both chronic and acute respiratory exposure to ammonia. METHODS:This study was conducted in an ice factory. Ammonia reservoirs were selected as the danger center. The scenarios were evaluated from the perspective of the worst-case. The Emergency Response Planning Guidelines 1–3 was used to predict the dangerous concentrations in acute exposure. The probability of human vulnerability was estimated using the Probit model. PHAST 7.2 software was used to model consequences. As a measure of chronic exposure to ammonia, NMAM 6016 was used. A respiratory symptom questionnaire developed by the American Thoracic Society was used for collecting respiratory symptom histories. RESULTS:The ERPG3 level or concentration of 750 ppm was found at a distance of 617.71 and 411.01 meters from tanks, respectively, as a result of a rupture in reservoir 1 over a period of two halves of the year. It was found that the highest probit values for tank 2 at distances of zero, 25, 50, 75, 100, 125, and 150 meters were 9.55, 5.92, 5.47, 4.82, 4.23, 3.56 and 2.96, respectively. The prevalence of pulmonary symptoms, which include coughing, dyspnea, phlegm, and wheezing, was 28%, 19%, 15%, and 26% in the chronic exposure group. CONCLUSION:In the event that an ammonia reservoir ruptures catastrophically, it may cause human injury at ERPG-2 or ERPG-3 levels. Results revealed that exposure to this substance can impose many pulmonary symptoms on the respiratory system of workers in industries. In order to reduce the vulnerability of humans to potential release scenarios, control measures must be implemented. Also, preventive and mitigation measures can be designed to enhance safety and resilience against the release of hazardous materials.
Keywords: Human vulnerability, consequence modeling, toxicity, respiratory symptoms, ammonia, ice factory
DOI: 10.3233/WOR-230106
Journal: Work, vol. 78, no. 4, pp. 1021-1033, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]