Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Roberts, T.G.a; | Cox, S.J.a | Lewis, A.L.b | Jones, S.A.b
Affiliations: [a] Department of Mathematics, Aberystwyth University, UK | [b] Biocompatibles UK Ltd, a Boston Scientific Company, Lakeview, Camberley, Surrey, UK
Correspondence: [*] Corresponding author: T.G. Roberts. E-mail: [email protected]
Abstract: BACKGROUND:Foam sclerotherapy is the process of using an aqueous foam to deliver surfactant to a varicose vein to damage vein wall endothelial cells, causing the vein to spasm, collapse and ultimately be re-absorbed into the body. Aqueous foams are complex fluids that can exhibit a significant yield stress and high effective viscosity which depend on their composition, particularly the bubble size and liquid fraction. OBJECTIVE:To characterise the properties of foams used for varicose vein sclerotherapy and determine their effectiveness in the displacement of blood during sclerotherapy. METHODS:Foams are modelled as yield stress fluids and their flow profiles in a model vein are predicted. Values of the yield stress are determined from experimental data for three different foams using the Sauter mean of the bubble size distribution. Along with the measured liquid fraction of the foams, this information is collected into a Bingham number which entirely characterises the process of sclerotherapy. RESULTS:Polydispersity in bubble size has a strong effect on the yield stress of a foam and the Sauter mean of the size distribution better captures the effects of a few large bubbles. Reducing the polydispersity increases the yield stress, and a higher yield stress results in a larger plug region moving along the vein, which is more effective in displacing blood. The width of the plug region is proportional to the Bingham number, which also has a quadratic dependence on the liquid fraction of the foam. Assuming typical values for the rate of injection of a foam, we predict that for a vein of diameter 5 mm, the most effective foams have low liquid fraction, a narrow size distribution, and a Bingham number B ≈ 4.5. CONCLUSIONS:The Sauter mean radius provides the most appropriate measure of the bubble size for sclerotherapy and the Bingham number then provides a simple measure of the efficacy of foam sclerotherapy in a vein of a given size, and explains the ability of different foams to remove varicose veins. Foams containing small bubbles, with a narrow size distribution, and a low liquid fraction are beneficial for sclerotherapy.
Keywords: Foam, sclerotherapy, yield stress, varicose veins
DOI: 10.3233/BIR-201004
Journal: Biorheology, vol. 57, no. 2-4, pp. 77-85, 2021
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]