Custom-designed sensors embedded 3D-printed wearable device for improving the hemodialysis-related vascular dysfunction detection

Article type: Research Article

Authors: Chen, Wei-Ling^{a; b} | Lin, Chia-Hung^c | Yang, Tsung-Lung^d | Lin, Che-Wei^e | Kan, Chung-Dann^{f; *}

Affiliations: [a] School of Biomedical Engineering, College of Biomedical Engineering, Taipei Medical University, Taipei, Taiwan | [b] Institute of Food and Drug Administration, Ministry of Health Welfare, Taipei, Taiwan | [c] Department of Electrical Engineering, National Chin-Yi University of Technology, Taichung, Taiwan | [d] KSVGH Originals and Enterprises, Kaohsiung Veterans General Hospital, Kaohsiung, Taiwan | [e] Department of Biomedical Engineering, College of Engineering, National Cheng Kung University, Tainan, Taiwan | [f] Division of Cardiovascular Surgery, Department of Surgery, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan, Taiwan

Correspondence: [*] Corresponding author: Chung-Dann Kan, Division of Cardiovascular Surgery, Department of Surgery, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan, Taiwan. E-mail: [email protected].

Abstract: BACKGROUND: The increasing prevalence of end-stage renal disease (ESRD) imposes a substantial economic burden on public health-care systems. Hemodialysis (HD) is a pivotal treatment modality for patients with ESRD. However, prolonged use of HD vessels may result in stenosis, thrombosis, and occlusion due to repeated daily punctures. Thus, early detection and prevention of the dysfunction of dialysis routes are crucial. OBJECTIVE: In this study, we designed a wearable device for the early and accurate detection of arteriovenous access (AVA) stenosis in HD patients. METHODS: A personalized three-dimensional (3D) printed wearable device was designed by combining the phonoangiography (PAG) and photoplethysmography (PPG) techniques. The capability of this device to monitor AVA dysfunction before and after percutaneous transluminal angioplasty (PTA) was evaluated. RESULTS: After PTA, the amplitudes of both PAG and PPG signals increased in patients with arteriovenous fistulas and those with arteriovenous grafts; this might be due to increased blood flow. CONCLUSION: Our designed multi-sensor wearable medical device using PAG, PPG, and 3D printing appears suitable for early and accurate detection of AVA stenosis in HD patients.

Keywords: Hemodialysis, personalized 3D printed device, phonoangiography

DOI: 10.3233/THC-235000

Journal: Technology and Health Care, vol. 31, no. 5, pp. 1969-1979, 2023