Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: van der Linde, R.Q.
Affiliations: Delft University of Technology, Man-Machine Systems and Control group, Faculty of Design, Engineering and Production, Mekelweg 2, 2628CD Delft, The Netherlands. E-mail: [email protected]
Abstract: Ballistic walking has been a topic of research in biomechanics and robotics several times. The main advantages of this approach are: self-organizing properties, minimal energetic expenditure, and natural movement. This would make ballistic walking a perfect physical principle for application in rehabilitation, and robotics. However a typical shortcoming of this approach is that it does not explicitly involve actuation (e.g., muscles or motors). In this work ballistic walking is extended with variable intrinsic system parameters, which can be used as an energy input and for disturbance control. With a limit cycle approach walking cycles can be synthesized and cycle controllers can be designed. Experiments with a bipedal robot and simulations illustrate the route towards more robust, and applicable ballistic walking.
DOI: 10.3233/THC-1999-7611
Journal: Technology and Health Care, vol. 7, no. 6, pp. 449-453, 1999
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]