Comparison of Force Reconstruction Methods for a Lumped Mass Beam

Article type: Research Article

Authors: Bateman, Vesta I.^; | Mayes, Randall L. | Carne, Thomas G.

Affiliations: Sandia National Laboratories, Albuquerque, NM 87185-0555, USA

Note: [] This work was supported by the US Department of Energy under Contract DE-AC04-76-DP00789.

Abstract: Two extensions of the force reconstruction method, the sum of weighted accelerations technique (SWAT), are presented in this article. SWAT requires the use of the structure's elastic mode shapes for reconstruction of the applied force. Although based on the same theory, the two new techniques do not rely on mode shapes to reconstruct the applied force and may be applied to structures whose mode shapes are not available. One technique uses the measured force and acceleration responses with the rigid body mode shapes to calculate the scalar weighting vector, so the technique is called SWAT-CAL (SWAT using a calibrated force input). The second technique uses the free-decay time response of the structure with the rigid body mode shapes to calculate the scalar weighting vector and is called SWAT-TEEM (SWAT using time eliminated elastic modes). All three methods are used to reconstruct forces for a simple structure.

DOI: 10.3233/SAV-1997-4403

Journal: Shock and Vibration, vol. 4, no. 4, pp. 231-239, 1997