Exact and Direct Modeling Technique for Rotor-Bearing Systems with Arbitrary Selected Degrees-of-Freedom

Article type: Research Article

Authors: Chen, Shilin | Géradin, Michel

Affiliations: Aerospace Laboratory (LTAS), University of Liège, 21 Rue E. Solvay, 4000 Liège, Belgium

Abstract: An exact and direct modeling technique is proposed for modeling of rotor-bearing systems with arbitrary selected degrees-of-freedom. This technique is based on the combination of the transfer and dynamic stiffness matrices. The technique differs from the usual combination methods in that the global dynamic stiffness matrix for the system or the subsystem is obtained directly by rearranging the corresponding global transfer matrix. Therefore, the dimension of the global dynamic stiffness matrix is independent of the number of the elements or the substructures. In order to show the simplicity and efficiency of the method, two numerical examples are given.

DOI: 10.3233/SAV-1994-1601

Journal: Shock and Vibration, vol. 1, no. 6, pp. 497-506, 1994