In-plane free vibration analysis of an annular disk with point elastic support

Article type: Research Article

Authors: Bashmal, S. | Bhat, R. | Rakheja, S.

Affiliations: Department of Mechanical and Industrial Engineering, Concordia University, 1455 De Maisonneuve Blvd. W., Montreal, QC, H3G 1M8, Canada

Note: [] Corresponding author. E-mail: [email protected]

Abstract: In-plane free vibrations of an elastic and isotropic annular disk with elastic constraints at the inner and outer boundaries, which are applied either along the entire periphery of the disk or at a point are investigated. The boundary characteristic orthogonal polynomials are employed in the Rayleigh-Ritz method to obtain the frequency parameters and the associated mode shapes. Boundary characteristic orthogonal polynomials are generated for the free boundary conditions of the disk while artificial springs are used to account for different boundary conditions. The frequency parameters for different boundary conditions of the outer edge are evaluated and compared with those available in the published studies and computed from a finite element model. The computed mode shapes are presented for a disk clamped at the inner edge and point supported at the outer edge to illustrate the free in-plane vibration behavior of the disk. Results show that addition of point clamped support causes some of the higher modes to split into two different frequencies with different mode shapes.

Keywords: Rayleigh-Ritz method, in-plane free vibration, natural frequencies, boundary characteristic orthogonal polynomials

DOI: 10.3233/SAV-2010-0578

Journal: Shock and Vibration, vol. 18, no. 4, pp. 627-640, 2011