Abstract: Inadequate attention during design and construction of some of
reinforced concrete (RC) buildings in Cyprus has raised questions about the
performance level of these existing buildings under future earthquakes. This
study aimed to assess the seismic structural response of a four story existing
RC building. For this purpose, first, the weak structural elements (e.g.\ the
not safety column-beam joints and weak columns) were detected using linear
static procedure (LSP) analyses on the basis of Turkish earthquake code. Then,
two different strengthening methods were examined. In the first method which is
common in Cyprus, the existing building was strengthened based on LSP, using
column jacketing to satisfy seismic code requirements to remove the weak
elements. The second strengthening method was carried out using nonlinear
static procedures (NSP) to achieve the basic safety objective (BSO) performance
level described in FEMA 356. For existing and both strengthened structures,
pushover curves were obtained and following FEMA 356, performance points were
calculated and compared. The seismic responses of existing and strengthened
buildings were also assessed using incremental dynamic analyses (IDA).
Nonlinear dynamic time history analyses have been performed by using SDOF
models of these buildings under action of different scales of 20 ground motion
records. Then IDA curves for each earthquake have been constructed. Limit –
states at each performance level have been defined and summarizing the multi –
record IDA curves, 16%, 50% and 84% fractile curves were obtained.
Since selected structure represents common existing buildings in Cyprus,
probabilistic structural damage estimation fragility curves were also obtained
in terms of peak ground acceleration (PGA) for each considered performance
level. Results showed that the strengthening method based on the NSP to satisfy
the BSO requirements is much more effective than the one based on the LSP to
improve the building performance and to reduce the probability of exceeding of
limit states IO, LS and CP at any seismic zone.
