An inelastic beam element with hysteretic damping

Issue title: The International Conference on Engineering Dynamics 2007

Article type: Research Article

Authors: Papakonstantinou, K.G. | Dimizas, P.C. | Koumousis, V.K.

Affiliations: Institute of Structural Analysis and Aseismic Research, National Technical University of Athens, NTUA, Zografou Campus GR -15773, Athens, Greece

Note: [] Corresponding author. Tel.: +30 2107721657; Fax: +30 2107721651; E-mail: [email protected]

Abstract: In this work, an inelastic beam macro-element that incorporates hysteretic damping is presented. Based on classical theory of plasticity, a Bouc-Wen type model is utilized that simulates the hysteretic behavior of an inelastic spring element. Using this model, an inelastic nonlinear beam element is formulated based on the appropriate combination of two coupled nonlinear spring elements. The equations of motion are determined and are cast in a state-space form for the vector of the end displacements, velocities and hysteretic forces. The system is solved by employing a Runge-Kutta type of algorithm. The proposed inelastic beam model is then employed to simulate the experimental dynamic behavior of steel beams. The model parameters are estimated with the aid of a nonlinear system identification algorithm using existing experimental data. The proposed element approximates the inelastic behavior of steel beams adequately within plastic regions that do not undergo substantial stiffness degradation, or other relevant phenomena. Finally, the hysteretic damping features of the model are demonstrated.

Keywords: Hysteretic damping, Bouc-Wen model, nonlinear system identification, beam vibrations

Journal: Shock and Vibration, vol. 15, no. 3-4, pp. 273-290, 2008