Effect of lumbar support on human-head movement and discomfort in whole-body vibration
Abstract
BACKGROUND:
It is well known that prolonged sitting can elicit low back pain as a result of the abnormal shape of the spine. This problem becomes worse in whole-body vibration environments where a rocking motion of the pelvis can occur and may amplify the vibration motion transmitted to the lumbar spine.
OBJECTIVE:
Although the use of lumbar supports is common in static environments, little is known about how the use of such supports changes the biodynamic response and discomfort of the person in whole-body vibration environments.
METHODS:
The motion at the head and the discomfort of ten participants were recorded under five back-support conditions, including three commercially available lumbar supports.
RESULTS:
The results indicated significantly lower head motion and discomfort (p < 0.05) with the use of the lumbar supports than with a simple flat backrest.
CONCLUSIONS:
All lumbar supports used in this study combined the advantages of reduced head motion and reduced discomfort during whole-body vibration.
References
[1] | Wilder D.G., and Pope M.H., Epidemiological and aetiological aspects of low back pain in vibration environments - an update, Clinical Biomechanics, 11: (2) ((1996) ), pp. 61-73. |
[2] | Anderson G., , Murphy R.W., , Orengren R., and Nachemson A.L., The influence of Backrest Inclination and Lumbar Support on Lumbar Lordosis, Spine, 4: (1) ((1979) ). |
[3] | Makhsous M., , Lin F., , Bankard J., , Hendrix R.W., , Hepler M., and Press J., Biomechanical effects of sitting with adjustable ischial and lumbar support on occupational low back pain: evaluation of sitting load and back muscle activity, BMC Musculoskeletal Disorders, 10: (17) ((2009) ). |
[4] | Coleman N., , Hull B.P., and Ellitt G., An empirical study of preffed settings for lumbar support on adjustable chairs, Ergonomics, 41: (4) ((1998) ), pp. 401-419. |
[5] | Bhise V.D., Ergonomics in the Automotive Design Process, Boca Raton, FL: CRC Press, (2011) . |
[6] | Chaffin D.B., , Andersson G., and Martin B.J., Occupational Biomechanics, New York: John Wiley and Sons, (1999) . |
[7] | Snijders C.J., , Hermans P.F., , Niesing R., , Spoor C.W., and Stoeckart R., The influence of slouching and lumbar support on iliolumbar ligaments, intervertebral discs and sacroiliac joints, Clinical Biomechanics, 19: ((2004) ), pp. 323-329. |
[8] | Wilder D.G., , Pope M.H., and Magnusson M., Mechanical Stress Reduction During Seated Jolt/Vibration Exposure, Seminars in Perinatology, 20: (1) ((1996) ), pp. 54-60. |
[9] | Dupuis H., and Zerlett G., Whole-body vibration and disorders of the spine, Int Arch Occup Environ Health, 59: ((1987) ), pp. 323-336. |
[10] | Kittusamy N.K., A Checklist for Evaluating Cab Design of Construction Equipment, Applied Occupational and Environmental Hygiene, 18: (10) ((2003) ), pp. 721-723. |
[11] | Srdjevic Z., Operators' Participation in Selecting the Most Ergonomic Driver Seat, Journal of Agricultural Safety and Health, 11: (3) ((2005) ), pp. 347-352. |
[12] | Griffin M.J., Discomfort from feeling vehicle vibration, Vehicle System Dynamics, 45: ((2007) ), pp. 679-698. |
[13] | Maeda S., , Mansfield N.J., and Shibata N., Evaluation of subjective response to whole-body vibration exposure: Effect of frequency content, International Journal of Industrial Ergonomics, 38: ((2008) ), pp. 509-515. |
[14] | Schust M., , Bluthner R., and Seidel H., Examination of perceptions (intensity, seat comfort, effort) and reaction time (brake and accelerator) during low-frequency vibration in x- or y-direction and biaxial (xy-) vibration of driver seats with activated and deactivated suspension, Journal of Sound and Vibration, 298: ((2006) ), pp. 606-626. |
[15] | Subashi G., , Nawayeh N., , Matsumoto Y., and Griffin M.J., Nonlinear subjective and dynamic responses of seated subjects exposed to horizontal whole-body vibration, Journal of Sound and Vibration, 321: ((2009) ), pp. 416-434. |
[16] | Organization I.S., Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General Requirements, (1997) . |
[17] | DeShaw J., and Rahmatalla S., Predictive discomfort in single- and combined-axis whole-body vibration considering different seated postures, Human Factors, 56: (5) ((2014) ), pp. 850-863. |
[18] | DeShaw J., and Rahmatalla S., Effective Seat-to-head Transmissibility under Combined-Axis Vibration and Multiple Postures, Int. J. Vehicle Performance, 1: (3/4) ((2014) ). |
[19] | Griffin M., Handbook of Human Vibration, London: Academic Press, (1990) . |
[20] | Demic M., and Lukic J., Investigation of the transmission of fore and aft vibration through the body, Applied Ergonomics, 40: ((2009) ), pp. 622-629. |
[21] | Paddan G.S., and Griffin M.J., A review of the transmission of translational seat vibration to the head, Journal of Sound and Vibration, 21: ((1998) ), pp. 863-882. |
[22] | Wang W., , Rakheja S., and Boileau P.E., Relationship between measured apparent mass and seat-to-head transmissibility responses of seated occupants exposed to vertical vibration, Journal of Sound and Vibration, 314: ((2008) ), pp. 907-922. |
[23] | Jack R.J., and Eger T., The effects of posture on seat-to-head Whole-body vibration transmission, Journal of Low Frequency Moise, Vibration and Active Control, 27: (4) ((2008) ), pp. 309-325. |
[24] | Niekerk J.L., , Pielemeier W.J., and Greenberg J.A., The use of seat effective amplitude transmissibility (SEAT) values to predict dynamic seat comfort, Journal of Sound and Vibration, 260: ((2003) ), pp. 867-888. |
[25] | Westhuizen A., and Niekerk J.L., Verification of seat effective amplitude transmissibility (SEAT) value as a reliable metric to predict seat comfort, Journal of Sound and Vibration, 295: ((2006) ), pp. 1060-1075. |
[26] | Qiu Y., and Griffin M.J., Transmission of fore-aft vibration to a car seat using field tests and laboratory simulation, Journal of Sound and Vibration, 264: ((2003) ), pp. 135-155. |
[27] | Dickey J.P., , Eger T.R., and Oliver M.L., A systematic approach to simulating field-based occupational whole-body vibration exposure in the lab using a 6df robot, Work, 35: (1) ((2010) ), pp. 15-26. |
[28] | Hinz B., , Menzel G., , Bluthner R., and Seidel H., Seat-to-head Transfer Function of Seated Men - Determination with Single and Three Axis Excitations at Different Magnitudes, Industrial Health, 48: ((2010) ), pp. 615-627. |
[29] | Borg G., Psychophysical bases of perceived exertion, Medicine and Science in Sports and Exercise, 14: (5) ((1982) ), pp. 377-381. |
[30] | Dickey J.P., , Oliver M.L., , Boileau P.E., , Eger T.R., , Trick L.M., and Edwards A.M., Multi-axis sinusoidal whole-body vibrations: Part I - How long should the vibration and rest exposures be for reliable discomfort measures? Journal of Low Frequency Noise, Vibration and Active Control, 25: ((2006) ), pp. 175-184. |
[31] | DeShaw J., and Rahmatalla S., Comprehensive measurement in whole-body vibration, Journal of Low Frequency Noise, Vibration and Active Control, 31: (2) ((2012) ), pp. 63-74. |
[32] | Wang W., , Rakheja S., and Boileau P., Effect of back support condition on seat to head transmissibilities of seated occupants under vertical vibration, Journal of Low Frequency Noise, Vibration and Active Control, 25: ((2006) ), pp. 239-259. |
[33] | Newland D.E., An Introduction to random vibrations and spectral analysis, New York: Longman Inc., (1984) . |
[34] | Rahmatalla S., and DeShaw J., Effective seat-to-head transmissibility in whole-body vibration: Effects of posture and arm position, Journal of Sound and Vibration, 330: (25) ((2011) ), pp. 6277-6286. |
[35] | Hibbeler R.C., Mechanics of Materials, Seventh Edition, New Jersey: Pearson Prentice Hall, (2008) . |
[36] | Mansfield N.J., , Mackrill J., , Rimell A.N., and MacMull S.J., Combined Effects of Long-Term Sitting and Whole-Body Vibration on Discomfort Onset for Vehicle Occupants, Automotive Engineering, 2014: ((2014) ), pp. 1-8. |
[37] | Rahmatalla S., , Smith R., , Meusch J., , Xia T., , Marler T., and Contratto M., A Quasi-static discomfort measure in whole-body vibration, Industrial Health, 48: (5) ((2010) ), pp. 645-653. |
