Visualization Study on Suppression of Vortex Shedding from a Cylinder

Article type: Research Article

Authors: Shao, C. P. | Wang, J. M. | Wei, Q. D.

Affiliations: Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China. E-mail: [email protected] | State Key Laboratory of Turbulence and Complex Systems, Peking University, Beijing 100871, China. E-mail: [email protected]

Abstract: A narrow strip has been introduced as a control element to suppress vortex shedding from a cylinder. The strip is set parallel to the cylinder axis, and the key parameter of control in this study is the strip position, which is determined by the angle of attack of the strip and the distance between the strip and the cylinder axis. A circular cylinder and a square cylinder were tested respectively. Flow visualization and hot-wire measurement were performed in a low turbulence wind tunnel in the range of Reynolds number Re=4.0 × 10^3 ∼ 2.0 × 10^4. Test results show that, vortex shedding from both sides of the cylinder can be effectively suppressed if the strip is located in a certain zone in the wake. The effective zones in circular cylinder wakes at different Reynolds numbers have been found out, and the mechanism of the suppression has been discussed.

Keywords: Visualization, Flow control, Bluff-body, Vortex shedding, High Reynolds number

Journal: Journal of Visualization, vol. 10, no. 1, pp. 57-64, 2007