Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Fredrikze, Henk
Affiliations: Interfacultair Reactor Instituut, Technische Universiteit Delft, 2629 JB Delft, The Netherlands
Abstract: Two methods to measure neutron specular reflectivity at a steady state reactor are considered: the time of flight (TOF) method, where the time of flight of neutrons from a chopper to a detector is used to determine the wavelength and the LARMOR method, where the precession of the polarization of a neutron beam around an applied magnetic induction is used to determine the wavelength. Using computer simulations Poisson distributed ‘experimental data’ are generated taking into account the wavelength dependent flux, transmissions and detector efficiencies. Statistical accuracies for the ‘experimental’ neutron reflectivities are estimated from ‘experimental’ numbers of counts. Resolution effects due to finite widths of time channels for TOF and due to the Fourier Transform algorithm for LARMOR are taken into account properly. Numerical results show that, although both methods are feasible, the TOF method has advantages over the LARMOR method.
DOI: 10.1080/10238169708200224
Journal: Journal of Neutron Research, vol. 5, no. 4, pp. 201-226, 1997
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]