Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Bowles, Thomas J.
Affiliations: Los Alamos National Laboratory
Abstract: Ultra Cold Neutrons (UCN) can be produced at spallation sources using a variety of techniques. To date the technique used has been to Bragg scatter and Doppler shift cold neutrons into UCN from a moving crystal. This is particularly applicable to short-pulse spallation sources and is the method planned for a UCN source that is under construction at LANSCE. However, large gains should be possible using cryogenic UCN sources. Spallation sources are particularly well suited for such sources given the lower heat loads and simpler engineering requirements than are possible at a reactor. The most attractive cryogenic source appears to be a frozen deuterium source and research is under way at Gatchina to demonstrate technical feasibility. If successful, a source of this type could be implemented at future spallation sources with a UCN density that may be two orders of magnitude higher than that presently available at reactors.
DOI: 10.1080/10238169608200084
Journal: Journal of Neutron Research, vol. 4, no. 1-4, pp. 191-196, 1996
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]