Detector for the FSD Fourier-diffractometer Based on ZnS(Ag)/⁶LiF Scintillation Screen and Wavelength Shifting Fiber Readout

Article type: Research Article

Authors: Kuzmin, E.S. | Balagurov, A.M. | Bokuchava, G.D. | Zhuk, V.V. | Kudryashev, V.A. | Bulkin, A.P. | Trounov, V.A.

Affiliations: Condensed Matter Department, Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, 6 Joliot-Curie, 141 980 Dubna, Moscow Region, Russia | Petersburg Nuclear Physics Institute of Russian Academy of Science, 188 350 Gatchina, St. Petersburg Region, Russia

Note: [] Corresponding author. Fax: +7-09621-65-882. E-mail: [email protected]

Abstract: At the IBR-2 pulsed reactor (FLNP, JINR, Dubna), a specialized time-of-flight instrument, the Fourier-Stress-Diffractometer (FSD), is under construction. This instrument is intended for the measurement of internal stresses in bulk samples by using high-resolution neutron diffraction. One of the main components of the diffractometer is a new-type of detector with combined electronic–geometric focusing, uniting a large solid angle and a small geometric contribution to the instrumental resolution. The first two modules of the detector, based on ZnS(Ag)/6LiF scintillation screen with wavelength shifting fiber readout have been developed and tested. In this paper, the design of the detector and associated electronics are described. The method of time focusing surface approximation using the screen flexibility is proposed. Characteristics of tested modules in comparison with a detector of previous generation are presented and advantages of the new detector design for high-resolution diffractometry are discussed.

Keywords: Scintillation detector, Neutron diffraction, ZnS(Ag), Fourier diffractometer, WLS-fibers

DOI: 10.1080/10238160290027748

Journal: Journal of Neutron Research, vol. 10, no. 1, pp. 31-41, 2002