Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Xiao, Yanjuna; b; c; *; 1 | Pei, Eryuea | Shi, Linhana | Peng, Kaia | Liu, Weilinga; *; 1
Affiliations: [a] School of Mechanical Engineering, Hebei University of Technology, Tianjin, China | [b] Career Leader Intelligent Control Automation Company, Suqian, Jiangsu Province, China | [c] Tianjin Key Lab Power Transmiss & Safety Technol, Dept State Key Lab Reliabil & Intellectual Elect, Tianjin, China
Correspondence: [*] Corresponding authors. Yanjun Xiao, E-mail: [email protected] and Weiling Liu, School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China. E-mail: [email protected].
Note: [1] These authors contributed equally to this work.
Abstract: In order to solve the problem that Switched Reluctance Motor (SRM) generates torque pulsation phenomenon during operation, which reduces the stability of loom spindle operation, this paper proposes and designs a multi-algorithm fusion-based SRM control strategy from the point of view of control strategy research. Combined with the operating characteristics of the loom, the causes of SRM torque pulsation are analyzed from the point of view of SRM control strategy, and combined with the spindle control indexes, the voltage chopper control and torque distribution function are introduced to construct the SRM control strategy scheme for the loom. On this basis, an optimization strategy based on the fusion of fuzzy control algorithm, particle swarm algorithm and simulated annealing algorithm is proposed to optimize the torque distribution function, and the algorithmic process of SRM control strategy is verified through comparative tests. The results show that the control strategy can make its torque pulsation reduced to less than 10%, the speed rise time is less than 0.1 s, and the relative error of the speed is less than 0.05%, which meets the index requirements of the spindle drive. This proves that the SRM torque pulsation can be reduced by the multi-algorithm fusion control strategy without increasing the hardware cost, which provides a useful reference for solving the SRM torque pulsation problem under the requirement of low cost.
Keywords: Rapier loom, switched reluctance motor, torque distribution function, multi-algorithm fusion
DOI: 10.3233/JIFS-233138
Journal: Journal of Intelligent & Fuzzy Systems, vol. 46, no. 4, pp. 7933-7957, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]