A Fuzzy controlled high gain DC–DC converter for renewable power generation

Issue title: Special Section: Intelligent, Smart and Scalable Cyber-Physical Systems

Guest editors: V. Vijayakumar, V. Subramaniyaswamy, Jemal Abawajy and Longzhi Yang

Article type: Research Article

Authors: Arunkumari, T.^a | Indragandhi, V.^{b; *}

Affiliations: [a] School of Electrical Engineering, Research Scholar, VIT University, Vellore | [b] School of Electrical Engineering, Associate Professor, VIT University, Vellore

Correspondence: [*] Corresponding author. V. Indragandhi, School of Electrical Engineering, Associate Professor, VIT University, Vellore. E-mail: [email protected].

Abstract:  In this manuscript a DC non-isolated converter model with high static voltage gain module is presented. The proposed converter has the feature of stable frequency and stable output voltage. It also achieves high voltage conversion, high efficiency, low voltage stress and less switching loss. The voltage tripler technique is implemented in the proposed model. The designed converter model attains high static gain with reduced duty cycle. The proposed single switch converter is controlled by fuzzy-PI controlled technique. The working process of the converter under Continuous Conduction Mode (CCM) is explained. The 30 V input source is boosted up to 400 V. The simulation of the presented converter is done with MATLAB simulink. The hardware prototype is also tested and results are analysed.

Keywords: Continuous conduction mode, duty-cycle, high voltage gain, fuzzy-PI, voltage tripler

DOI: 10.3233/JIFS-169975

Journal: Journal of Intelligent & Fuzzy Systems, vol. 36, no. 5, pp. 4165-4176, 2019