Removal of disinfection by-products formation potential by biologically intensified process

Article type: Research Article

Authors: AN, Dong | LI, Wei-guang | CUI, Fu-yi | HE, Xin | ZHANG, Jin-song

Affiliations: School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China | Shenzhen Water Group, Shenzhen 518031, China

Note: [] Corresponding author. E-mail: [email protected]

Abstract: The removal of disinfection by-products formation potential (DBPFP) in artificially intensified biological activated carbon (IBAC) process which is developed on the basis of traditional ozone granular activated carbon was evaluated. By IBAC removals of 31% and 68% for THMFP and HAAFP were obtained respectively. Under identical conditions, the removals of the same substances were 4% and 32% respectively only by the granular activated carbon (GAC) process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. A clear linear correlation (R^2 = 0.9562 and R^2 = 0.9007) between DOC HAAFP removal rate and Empty Bed Contact Time(EBCT) of IBAC process was observed, while that between THMFP removal rate and EBCT of GAC was R^2 = 0.9782. In addition certain linear correlations between THMFP, HAAFP and UV_{254} (R^2 = 0.855 and R^2 = 0.7702) were found for the treated water. For IBAC process there are also more advantages such as long backwashing cycle time, low backwashing intensity and prolonging activated carbon lifetime and so on.

Keywords: intensified biological activated carbon (IBAC), by-products formation potential (DBPFP), empty bed contact time, water treatment

Journal: Journal of Environmental Sciences, vol. 17, no. 2, pp. 315-318, 2005