Immobilization study of biosorption of heavy metal ions onto activated sludge

Article type: Research Article

Authors: WU, Hai-suo | ZHANG, Ai-qiang | WANG, Lian-sheng

Affiliations: State Key Laboratory of Pollution Control and Resources Reuse, School of the Environment, Nanjing University, Nanjing 210093, China

Note: [] Corresponding author. E-mail: [email protected]

Abstract: Activated sludge was immobilized into Ca-alginate beads via entrapment, and biosorption of three heavy metal ions, copper(II), zinc(II), and chromimum(II), from aqueous solution in the concentration range of 10-100 mg/L was studied by using both entrapped activated sludge and inactivated free biomass at pH ⩽ 5. A biphasic metal adsorption pattern was observed in all immobilized biomass experiments. The biosorption of metal ions by the biosorbents increased with the initial concentration increased in the medium. The adsorption rate of immobilized pretreated activated sludge (PAS) was much lower than that of free PAS due to the increase in mass transfer resistance resulting from the polymeric matrix. Biosorption equilibrium of beads was established in about 20 h and the adsorbed heavy metal ions did not change further with time. No significant effect of temperature was observed in the test for free biomass while immobilized PAS appeared to be strong temperature dependent in the test range of 10 and 40°C. Besides, the content of activated sludge in the calcium alginate bead has an influence on the uptake of heavy metals. The sorption equilibrium was well modeled by Langmuir isotherm, implying monomolecular adsorption mechanism. Carboxyl group in cell wall played an important role in surface adsorption of heavy metal ions on PAS.

Keywords: biosorption, alginate beads, immobilization, heavy metal, activated sludge, wastewater treatment

Journal: Journal of Environmental Sciences, vol. 16, no. 4, pp. 640-645, 2004