Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Rele, Rajesh R.a; * | Balmukund, Ranjana | Mitoulis, Stergios A.b | Bhattacharya, Subhamoyb
Affiliations: [a] R. R Consulting Engineers, Mumbai, India | [b] University of Surrey, Guildford, UK
Correspondence: [*] Corresponding author. Rajesh R. Rele, R. R Consulting Engineers, Mumbai, India. E-mail: [email protected].
Abstract: The conventional design philosophy of bridges allows damage in the pier through yielding. A fuse-like action is achieved if the bridge piers are designed to develop substantial inelastic deformations when subjected to earthquake excitations. Such a design can avoid collapse of the bridge but not damage. The damage is the plastic hinge formation formed at location of maximum moments and stresses that can lead to permanent lateral displacement which can impair traffic flow and cause time consuming repairs. Rocking can act as a form of isolation by means of foundation uplifting which act as a mechanical fuse, limiting the forces transferred to the base of the structure. In this context, this paper proposes a novel resilient controlled rocking bridge pier foundation, which uses elastomeric pads incorporated beneath the footing of the bridge piers and external restrainer in the form of shape memory alloy bar (SMA). The rocking mechanism is achieved by restricting the horizontal movement of footing by providing stoppers at all sides of footing. The pads are designed to remain elastic without allowing their shearing. The pier, the footing and the elastomeric pads are assumed to be supported on firm rigid concrete sub base resting on hard rock. By performing nonlinear dynamic time history analysis in the traffic direction of the bridge, the proposed pier with the novel resilient foundation is compared against a fixed-based pier and classical rocking pier (CC). The proposed pier rocking on elastomeric pads and external restrainer (CP+SMA) has good re-centering capability during earthquakes with negligible residual drift and footing uplift. In this new rocking isolation technique, the forces in the piers are also reduced and thus leading to reduced construction cost with enhanced post-earthquake serviceability.
Keywords: Bridges, pier, rocking isolation, stoppers, elastomeric pad, resilient, shape memory alloy bar
DOI: 10.3233/BRS-200174
Journal: Bridge Structures, vol. 16, no. 2-3, pp. 85-103, 2020
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]