Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Rudov, Sergej; * | Kunickaya, Ol’gaa | Burgonutdinov, Albertb | Kruchinin, Igorc | Prosuzhih, Alexeyd | Dolmatov, Nikolaye | Dmitrieva, Nataliaf | Grigorev, Igora
Affiliations: Military Academy of Communications named after Marshal of the Soviet Union S.M. Budyonny, Saint-Petersburg, Russian Federation | [a] Yakut State Agricultural Academy, Yakutsk, Russian Federation | [b] Perm National Research Polytechnic University, Perm, Russian Federation | [c] Ural State Forestry University, Ekaterinburg, Russian Federation | [d] Ukhta State Technical University, Ukhta, Russian Federation | [e] Don State Agrarian University, Novocherkassk, Russian Federation | [f] Petrozavodsk State University, Petrozavodsk, Russian Federation
Correspondence: [*] Corresponding Author. [email protected]
Abstract: In the Russian Federation, the permafrost zone are gaining increasing importance due to wood procurement operations. Active timber harvesting, accompanied by the simultaneous development of wood processing enterprises in the Far Eastern Federal District, leads to the depletion of available and exploitable forests in southern and central Siberia, Buryatia, and Khabarovsk territory. The exploitation of modern forestry machines, wheeled forwarders, in particular, broadens the question of their effectiveness. In specific production and geotechnical conditions, the cross-country ability and technological productivity of wheeled forwarders are of particular relevance. These circumstances, combined with the need to minimise technological pressure on the ecological environment raise the problem of optimisation of the forest machines. We developed a mathematical model for calculating parameters of the defrosting soil destruction process occurring at the border with the permafrost zone. The mathematical model allows assessment of the possible value depth of the induced track at the stage of the project design. The assessment is conducted with the account of the forest machine’s technical and maneuvering capabilities in specific natural and industrial conditions.
Keywords: Forestry machines, forests, mathematical model, wood, wood processing
DOI: 10.3233/AJW200055
Journal: Asian Journal of Water, Environment and Pollution, vol. 17, no. 4, pp. 89-95, 2020
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]