Equilibrium Partitioning Approach to Define Sediment Quality Guideline of Some Metals in Chao Phraya Estuary, Thailand

Article type: Research Article

Authors: Jiwarungrueangkul, Thanakorn^a | Dharmavanij, Sirichai^{a; *} | Sompongchaiyakul, Penjai^{a; b} | Kornkanitnan, Narumol^c

Affiliations: [a] Department of Marine Science, Faculty of Science, Chulalongkorn University Phya Thai Rd., Bangkok 10330, Thailand | [b] Center of Excellence on Hazardous Substance Management, Chulalongkorn University Phya Thai Rd., Bangkok 10330, Thailand | [c] Marine and Coastal Resources Research and Development Center (Upper Gulf of Thailand) 120/1, Village No. 6, Bangyaprak Sub-district, Mueang district, Samut Sakhon 74000, Thailand

Correspondence: [*] Corresponding Author. [email protected]

Abstract: This study aims to define numerical sediment quality guideline (SQG) based on equilibrium partitioning approach that represents availability of metal in estuarine sediment. The labile-phase metal was used in calculating the partition coefficient caused by remobilization of this fraction in the sediment-interstitial water system as a result of changing physicochemical condition in sediment. In addition, the metal bound with sulphide fraction was taken into account in calculating the SQG since this fraction is potentially available to interstitial water when oxidation process occurs in anoxic sediment. The SQG values for Chao Phraya estuarine sediment for cadmium, copper, lead and zinc were found in the range of 1.2–3.1, 7–105, 23–86 and 16–125 mg/kg dry weight in <63 μm fraction and CaCO3 free basis, respectively. However, in order to support the calculated SQG value, toxicity test for metal using the same sediment should be further studied.

Keywords: Sediment quality guideline, equilibrium partitioning approach, metal, Chao Phraya estuary

DOI: 10.3233/AJW-150004

Journal: Asian Journal of Water, Environment and Pollution, vol. 12, no. 3, pp. 23-31, 2015