Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2024: 1.7
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Beheshti, Maedeh | Ashapure, Akash | Rahnemoonfar, Maryam | Faichney, Jolon
Article Type: Research Article
Abstract: Accurate segmentation of fluorescence images has become increasingly important for recognizing cell nucleus that have the phenotype of interest in biomedical applications. In this study an ensemble based method is proposed for the segmentation of cell cancer microscopy images. The ensemble is constructed and compared using Bayes graph-cut algorithm, binary graph-cut algorithm, spatial fuzzy C-means, and fuzzy level set algorithm, which were chosen for their accuracy and efficiency in the segmentation area. We investigate the performance of each method separately and finally compare the results with the ensemble method. Experiments are conducted over two datasets with different cell types. At …95% confidence level, the ensemble based method represents the best among all the implemented algorithms. Also ensemble method depicts better results in comparison with other state-of-the-art segmentation methods. Show more
Keywords: Bayes graph-cut models, image segmentation, ensemble methods, fluorescence microscopy images, spatial fuzzy c-means
DOI: 10.3233/JIFS-17466
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2563-2578, 2018
Authors: Ju, Dawei | Ju, Yanbing | Wang, Aihua
Article Type: Research Article
Abstract: Maclaurin symmetric mean (MSM) operator is a powerful tool to integrate multiple input arguments, which has the characteristic of considering the interrelationships among the input arguments. In this paper, we extend the traditional MSM operator to the single-valued neutrosophic interval 2-tuple linguistic environment, propose some novel aggregation operators, and develop a novel method to solve multiple attribute group decision making (MAGDM) problems. Firstly, we put forward the concept of single-valued neutrosophic interval 2-tuple linguistic sets (SVN-ITLSs) by combining the definitions of single-valued neutrosophic sets and interval 2-tuple. Secondly, the Maclaurin symmetric mean is extended to the single-valued neutrosophic interval 2-tuple …linguistic environment and three new aggregation operators are proposed, such as the single-valued neutrosophic interval 2-tuple linguistic Maclaurin symmetric mean (SVN-ITLMSM) operator, the single-valued neutrosophic interval 2-tuple linguistic weighted average (SVN-ITLWA) operator and the single-valued neutrosophic interval 2-tuple linguistic weighted Maclaurin symmetric mean (SVN-ITLWMSM) operator. Some desirable properties of the proposed SVN-ITLMSM operator are investigated. Thirdly, an approach to solve MAGDM problem is developed based on the proposed operators. Finally, a numerical example is given to illustrate the application and the effectiveness of the proposed method. Show more
Keywords: Multiple attribute group decision making, single-valued neutrosophic interval 2-tuple linguistic sets, single-valued neutrosophic interval 2-tuple linguistic Maclaurin symmetric mean (SVN-ITLMSM) operator, single-valued neutrosophic interval 2-tuple linguistic weighted Maclaurin symmetric mean (SVN-ITLWMSM) operator
DOI: 10.3233/JIFS-17496
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2579-2595, 2018
Authors: Onar, Serkan | Yavuz, Sanem | Ersoy, Bayram Ali | Hila, Kostaq
Article Type: Research Article
Abstract: In this paper, the study of vague soft structures of modules is initiated by introducing the concepts of vague soft module, vague soft module homomorphism and vague soft exactness. In the meantime, some of their properties and structural characteristics are investigated and discussed. Thereafter, several illustrative examples are given.
Keywords: Soft set, vague set, vague soft set, soft module, vague soft module, vague soft module homomorphism, vague soft exactness
DOI: 10.3233/JIFS-17497
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2597-2609, 2018
Authors: Tan, Chunqiao | Yi, Wentao | Chen, Xiaohong
Article Type: Research Article
Abstract: Players are often assumed to be perfect rational in Bertrand game. However, the decision-making of players is influenced by their behavioral characteristic, psychology preferences and other uncertain factors. Therefore, this paper focuses on investigating the price strategies of players with risk aversion in a Bertrand game under a fuzzy environment. Based on the credibility theory, a fuzzy Bertrand game model with risk aversion is constructed, where optimistic value criterion is applied to model players’ risk aversion. The market demand for each player is assumed as a fuzzy variable. Then, a solution concept of the (α1 , α2 )-optimistic equilibrium price …is defined and investigated. Finally, some numerical studies are applied to analyze how the risk aversion behavior of players (the confidence levels of players) affects the (α1 , α2 )-optimistic equilibrium prices and the profits of the fuzzy Bertrand game. Show more
Keywords: Bertrand game, risk aversion, credibility theory, optimistic value criterion, (α1 , α2)-optimistic equilibrium price
DOI: 10.3233/JIFS-17551
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2611-2624, 2018
Authors: Chang, Kuei-Hu | Wen, Ta-Chun | Chung, Hsiang-Yu
Article Type: Research Article
Abstract: Risk assessment is a critical part of reliability engineering and is vital to the success of an enterprise’s performance. Traditionally, risk assessment has used the risk priority number (RPN) to evaluate the risk of failure. Unfortunately, the traditional RPN method has several shortcomings— it loses partially valuable information when some data are missing or nonexistent and does not consider the ordered weight between the severity, occurrence, and detection indicators; further, it does not consider the direct and indirect relationships between failure modes and causes of failure, and it has a high duplication rate. To resolve these issues, this paper integrates …the ordered weighted geometric (OWG) operator and hesitant fuzzy linguistic term sets to increase the effectiveness of failure mode and effects analysis (FMEA), named soft FMEA. An empirical case of extreme low-k (ELK) dielectric integration is used to illustrate the proposed method and demonstrate its value. Our results show that the soft FMEA method is applicable to real-world situations and constitutes a more general FMEA method. Show more
Keywords: Soft failure mode and effects analysis, ordered weighted geometric, decision making trial and evaluation laboratory, extreme low-k dielectric integration, hesitant fuzzy linguistic term sets
DOI: 10.3233/JIFS-17594
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2625-2639, 2018
Authors: Wang, Yansheng | Jin, Zhixin | Deng, Cunbao | Wang, Xinyang
Article Type: Research Article
Abstract: In order to make the comprehensive decision-making results more consistent with the actual situation, a fuzzy comprehensive decision-making model with fuzzy combined weighting is developed in this paper. The fuzzy combined weighting method (FCWM) is proposed in the model to determine the weights of decision factors (indexes). The subjective weight and objective weight are combined in the FCWM to reduce the decision error caused by either using subjective weight or objective weight alone. In addition, the fuzziness of combined weights is taken into account in FCWM to make the decision-making results more realistic. The fuzzy structured element is used to …express fuzzy numbers in the model. The analysis algorithm of fuzzy comprehensive decision based on the expression of fuzzy structured element is given to solve the problem of complex operations among fuzzy numbers. The decision model was applied to the order of metal mine gob management. It provides guidance for gob management reasonably and orderly. The research results also provide a new idea for the determination of weights in other fuzzy analysis models. Show more
Keywords: Fuzzy comprehensive decision-making, fuzzy combined weighting, fuzzy structured element theory, order of gob management
DOI: 10.3233/JIFS-17700
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2641-2649, 2018
Authors: Marjanian, Ali | Soleymani, Soodabeh
Article Type: Research Article
Abstract: The complexity of power system stability studies, especially voltage stability considering dynamic loading margin based on Hopf bifurcation and reactive loading margin based on limit-induced bifurcation, challenges the conventional methods the effectiveness of which highly depends on the operating point, particularly the load level. The occurrence of reactive limit causes changes in the stability boundaries of power systems and, in some cases, leads to instability. In the current study, an attempt was made to investigate dynamic loading margin (DLM) and reactive loading margin (RLM) as well as their effects on the occurrence of bifurcation points of power systems. Also, the …states in which these bifurcations occur relative to each other are explained. Finally, in accordance with the results, a classification model for the identification of the operating point states of the power system is introduced. The purpose of presenting this classification is to determine the operational condition of power systems based on the mentioned boundaries without solving dynamic algebraic equations. To that end, an approach consisting of the phasor measurement unit (PMU) data acquisition, feature selection, and probabilistic neural network (PNN) is proposed to predict the power system voltage stability state. The effectiveness of the proposed strategy is shown on the New-England test system in normal and contingency states. Show more
Keywords: Hopf bifurcation, dynamic loading margin (DLM), limit induced bifurcation, reactive loading margin (RLM), phasor measurement units (PMUs), probabilistic neural network (PNN)
DOI: 10.3233/JIFS-17763
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2651-2666, 2018
Authors: Aghabozorgi, Farshad | Reza Khayyambashi, Mohammad
Article Type: Research Article
Abstract: Link prediction is the problem of inferring future interactions among existing network members based on available knowledge. Computing similarity between a node pair is a known solution for link prediction. This article proposes some new similarity measures. Some of them use nodes’ recency of activities, some weights of edges and some fusion of both in their calculation. A new definition of recency is provided here. A supervised learning method that applies a range of network properties and nodes similarity measures as its features set is developed here for experiments. The results of the experiments indicate that using proposed similarity measures …would improve the performance of the link prediction. Show more
Keywords: Link prediction, supervised learning, recency, similarity measures, social networks
DOI: 10.3233/JIFS-17770
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2667-2678, 2018
Authors: Cayir Ervural, Beyzanur | Ervural, Bilal
Article Type: Research Article
Abstract: Optimal energy planning is one of the most significant issues for all over the world, in short, medium and long term strategic projections of countries due to the vagueness and concerns about energy reliability and sustainability in limited resources. The dynamic and chaotic nature of the energy systems requires a well-constructed and multidimensional prediction model to create an urgent energy requirement planning. In this study, grey prediction models based on genetic algorithm (GA) and particle swarm optimization (PSO) are proposed to provide more realistic and quick energy demand forecasting with high accuracy. The grey modelling is a popular approach that …can be used to construct a model with the limited sample of historical data. GA and PSO are used for the tuning of an optimal set of structural parameters of classical grey prediction model to obtain more robust and efficient solutions with minimum prediction errors. A case study using the data of Turkey is presented. Results confirm that the proposed methods demonstrate superior forecasting performance, compared with alternative models. Show more
Keywords: Energy planning, forecasting, grey modelling, genetic algorithm, particle swarm optimization
DOI: 10.3233/JIFS-17794
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2679-2688, 2018
Authors: Javed, Muhammad Aslam | Husnine, Syed Muhammad | Ashraf, Samina
Article Type: Research Article
Abstract: In crisp logic every object is similar to itself with degree of reflexivity 1, while the degree of reflexivity in fuzzy logic can be any value in the unit interval, [0, 1]. This behaviour of a fuzzy set is used to enlighten the concept of similarity and inclusion measures. This paper is aimed at discovering the relations between the parameters of the transitive members of a family of cardinality-based fuzzy measure.
Keywords: Cardinality based similarity measures, T-transitivity, fuzzy reflexive measures
DOI: 10.3233/JIFS-17827
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 4, pp. 2689-2706, 2018
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]