Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2024: 1.7
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Ma, Xueling | Zhan, Jianming
Article Type: Research Article
Abstract: Combining rough sets and soft sets, we apply rough soft sets to BL -algebras. Some new operations of the lower and upper soft approximations are obtained. In particular, rough soft (implicative, positive implicative, fantastic) filters with respect to a filter over BL -algebras are also investigated. In particular, we propose two kinds of decision making methods for rough soft BL -algebras. Finally, the numerical experimentation program is written for given by MATLAB, which supports the above decision making methods.
Keywords: BL-algebra, filter, rough soft (implicative, positive implicative, fantastic) filter, decision making
DOI: 10.3233/JIFS-17945
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 645-658, 2018
Authors: Vidhya, K.A. | Geetha, T.V.
Article Type: Research Article
Abstract: Entity Resolution (ER) is the method of resolving two similar entities used in the process of data cleaning and data integration. However, existing ER Framework lead to exhaustive pairwise comparisons. The most efficient ER method is blocking, inherently uses exponential pair-wise comparisons for the large databases, leading to poor efficiency in resolving the entities. The real world data can either be homogeneous or heterogeneous, generally of two forms, clean-clean ER which does not have any duplicates or dirty-ER which have duplicates within the dataset. Entity Resolution framework is associated with two phases namely the block building phase which construct the …blocks where the similar entities are grouped into a single block for effective indexing, while the aim of block processing phase is to reduce the number of redundant pair-wise comparisons. Another perspective is handling of the entity associated with heterogeneous data, in the proposed work the block building phase aims to gather related entities with different representations into a single block with an approximation space. For this purpose semantic-dominance rough set has been used to cluster the attributes of related entities having a varied schema. The similarity between the entities associated with the clustered attributes is determined using a rough-Jaccard similarity measure, grouped to form blocks of varied, but limited size. The pair-wise comparisons between the blocks of entities are carried out only when the lower approximation of the blocks are same, determined by the proposed multi-criteria Pareto optimality, else the entities are not compared, which signifies, the overall number of pair-wise comparisons is reduced. A performance analysis of the proposed technique has been tested on four real-world, highly heterogeneous datasets, and the validation of these algorithms has yielded 99.98% effectiveness and 98.3% efficiency in block comparison when compared to token blocking and attribute clustering methods. Show more
Keywords: Entity resolution, blocking, rough set, heterogeneous data, linked open data
DOI: 10.3233/JIFS-17946
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 659-675, 2018
Authors: Mondal, Sankar Prasad
Article Type: Research Article
Abstract: The paper presents an adaptation of Interval valued intuitionistic fuzzy number. The arithmetic operation of interval-valued intuitionistic fuzzy number (IVIFN) is addressed here. The differentiability of IVIFN valued function is also addressed here. Demonstration of intuitionistic fuzzy solutions of differential equation is carried out with the said numbers. Additionally, a illustrative application is also undertaken with the useful graph for usefulness for attained to the proposed approaches.
Keywords: Interval valued intuitionistic fuzzy number, differential equation, Drug concentration problem
DOI: 10.3233/JIFS-161898
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 677-687, 2018
Authors: Aydin, Ilhan | Karakose, Mehmet | Karakose, Ebru | Akin, Erhan
Article Type: Research Article
Abstract: Condition monitoring of induction motors has become an important issue of researchers in recent years. The detection of broken rotor bar faults is one of the most difficult problems and many methods have been proposed for accurate detection of these faults. In recent years, some studies have been proposed to improve the diagnostic performance by combining different signal processing techniques. However, the proposed methods require high computational complexity. The contribution of this study is threefold. The first one is a new feature extraction method to distinguish different motor conditions by analyzing one phase of induction motor steady-state current. The phase …space of the feature signal is constructed by using determined time delay and embedding dimension. The second contribution is to optimize the detectors of the negative selection algorithm by clonal selection. The proposed clonal selection algorithm minimizes the overlap between the detectors and maximizes the coverage of the anomalous data. Because the feature extraction method and test stage of the negative selection algorithm have low computational complexity, the last contribution is Field-Programmable-Gate-Array (FPGA) implementation for online detection of rotor related faults. The obtained results indicate that the proposed methodology demonstrates a high performance for diagnosis of rotor faults in induction motors. Show more
Keywords: Negative selection algorithm, clonal selection, FPGA, induction motors, fault detection
DOI: 10.3233/JIFS-161964
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 689-701, 2018
Authors: Ameri, R. | Asghari-Larimi, M. | Firouzkouhi, N.
Article Type: Research Article
Abstract: Let H be a hypersemigroup(hypergroup), we associate a fuzzy geometric spaces ( Δ , B ˜ ) to H , where Δ is a nonzero fuzzy subset of H and B ˜ is a family of nonzero fuzzy subsets of H such that B ˜ ⊆ Δ . Also, we prove that this fuzzy geometric space is strongly transitive on hypergroups, while it is not strongly transitive on hypersemigroups.
Keywords: Fuzzy geometric spaces, fuzzy hypesemigroup, fuzzy hypergroup, strongly transitive, fuzzy geometric spaces
DOI: 10.3233/JIFS-162444
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 703-709, 2018
Authors: Wang, Guo-Fang | Fang, Zhou | Li, Ping
Article Type: Research Article
Abstract: Reusing knowledge obtained in other related but different tasks to accelerate the learning procedure of reinforcement learning (RL) has attracted more and more attention and expert knowledge transfer is the root cause of positive effect. Nevertheless, compared with acquiring knowledge by RL training in source tasks, this paper proposes to transfer knowledge contained in human-demonstrations of source tasks. Based on this, three specific forms of knowledge in total are mined from demonstration trajectories to be reused in the target task to shape RL and all of them are closely associated with the similarity between states of different tasks which can …be measured by Euclidean distance via human-supplied inter-task mappings. In more detail, the similarity between the target state and the most similar state in source samples, the proportion of different actions among the k -NN of the target state in source samples and the proportion of different actions under a constant similarity with the target state in source samples are respectively selected to initialize the value of state-action function. Simulation experiments of mountain car problems with different difficulties and different dimensions suggest that all the three shaping methods could obviously speed up RL. In comparison, it can also be found that the two latter methods are more robust and efficient to the quality of human demonstrations as it takes more source samples’ information into consideration. Show more
Keywords: Transfer, human-demonstrations, shaping, reinforcement learning
DOI: 10.3233/JIFS-17052
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 711-720, 2018
Authors: Fan, Fengfei | Gai, Shan
Article Type: Research Article
Abstract: A new de-noising algorithm by using the Laplace model and the Normal Inverse Gauss model based on the non-subsampled contourlet transform is proposed. Firstly, the sub-band coefficients of non-subsampled transform are fitted by using the joint statistical model which can capture the texture information well of the natural image. Secondly, the new adjustment factor is introduced to improve the coefficients fitting accuracy of the joint statistical model. Finally, the new parameter estimation algorithm is proposed under the Bayesian estimation framework. The experimental results show that the proposed algorithm obtains better visual effects and de-noising results compared with the state-of-art de-noising …algorithms. Show more
Keywords: Image de-noising, non-subsampled contourlet transform, laplace model, normal Inverse Gaussian model, bayesian estimation
DOI: 10.3233/JIFS-17434
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 721-731, 2018
Authors: Song, Qingfeng | Shi, Kai | Lin, Sheng | Xu, Guangping | Yang, Oliver | Wang, Jinsong
Article Type: Research Article
Abstract: This paper investigates the problems of making optimal decisions on pricing and shelf-space for a fuzzy supply chain with one perishable product, with the help of Radio Frequency Identification Device (RFID) technology to reduce shrinkage. Based on the criterion of Value-at-Risk (VaR) and its minimization, we introduce one centralized decision model and three decentralized decision models to obtain the respective optimal decisions of both the manufacturer and the retailer, by analyzing the fuzzy uncertainties and the relationship among the demand, retail price and shelf-space. The corresponding optimal strategies of the two participants are obtained along with one example.
Keywords: Fuzzy variable, supply chain, Radio Frequency Identification Devices (RFID), Value-at-Risk (VaR), game theory
DOI: 10.3233/JIFS-17508
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 733-744, 2018
Authors: ur Rahman, Ghaus | Din, Qamar | Faizullah, Faiz | Khan, Faiz Muhammad
Article Type: Research Article
Abstract: In this paper, we study the qualitative behavior of the positive solutions of a second-order rational fuzzy difference equations with initial conditions and parameters are positive fuzzy numbers. More precisely, we investigate existence of positive solutions, boundedness, persistence and stability analysis of a second-order fuzzy rational difference equation. Some numerical examples are given to verify our theoretical results.
Keywords: Fuzzy difference equations, existence of solutions, boundedness character, local and global behavior
DOI: 10.3233/JIFS-17922
Citation: Journal of Intelligent & Fuzzy Systems, vol. 34, no. 1, pp. 745-753, 2018
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]