Bio-Medical Materials and Engineering - Volume 15, issue 1-2
Purchase individual online access for 1 year to this journal.
Price: EUR 245.00
Impact Factor 2023: 1.0
The aim of
Bio-Medical Materials and Engineering is to promote the welfare of humans and to help them keep healthy. This international journal is an interdisciplinary journal that publishes original research papers, review articles and brief notes on materials and engineering for biological and medical systems.
Articles in this peer-reviewed journal cover a wide range of topics, including, but not limited to: Engineering as applied to improving diagnosis, therapy, and prevention of disease and injury, and better substitutes for damaged or disabled human organs; Studies of biomaterial interactions with the human body, bio-compatibility, interfacial and interaction problems; Biomechanical behavior under biological and/or medical conditions; Mechanical and biological properties of membrane biomaterials; Cellular and tissue engineering, physiological, biophysical, biochemical bioengineering aspects; Implant failure fields and degradation of implants. Biomimetics engineering and materials including system analysis as supporter for aged people and as rehabilitation; Bioengineering and materials technology as applied to the decontamination against environmental problems; Biosensors, bioreactors, bioprocess instrumentation and control system; Application to food engineering; Standardization problems on biomaterials and related products; Assessment of reliability and safety of biomedical materials and man-machine systems; and Product liability of biomaterials and related products.
Abstract: The ability to use biological substitutes to repair or replace damaged tissues lead to the development of Tissue Engineering (TE), a field that is growing in scope and importance within biomedical engineering. Anchorage dependent cell types often rely on the use of temporary three‐dimensional scaffolds to guide cell proliferation. Computer‐controlled fabrication techniques such as Rapid Prototyping (RP) processes have been recognised to have an edge over conventional manual‐based scaffold fabrication techniques due to their ability to create structures with complex macro‐ and micro‐architectures. Despite the immense capabilities of RP fabrication for scaffold production, commercial available RP modelling materials are not…biocompatible and are not suitable for direct use in the fabrication of scaffolds. Work is carried out with several biocompatible polymers such as Polyetheretherketone (PEEK), Poly(vinyl alcohol) (PVA), Polycaprolactone (PCL) and Poly(L‐lactic acid) (PLLA) and a bioceramic namely, Hydroxyapatite (HA). The parameters of the selective laser sintering (SLS) process are optimised to cater to the processing of these materials. SLS‐fabricated scaffold specimens are examined using a Scanning Electron Microscope (SEM). Results observed from the micrographs indicate the viability of them being used for building TE scaffolds and ascertain the capabilities of the SLS process for creating highly porous scaffolds for Tissue Engineering applications.