Comparison of the ability of two continuous cardiac output monitors to detect stroke volume index: Estimated continuous cardiac output estimated by modified pulse wave transit time and measured by an arterial pulse contour-based cardiac output device
Affiliations: Department of Anaesthesiology, Toho University Omori Medical Centre, Ota-ku Tokyo 143-8541, Japan
Correspondence:
[*]
Corresponding author: Takashi Terada, Department of Anaesthesiology, Toho University Omori Medical Centre, 5-21-16 Omorinishi, Ota-ku Tokyo 143-8541, Japan. Tel.: +81 3 3762 4151; E-mail: [email protected].
Abstract: BACKGROUND: Estimated continuous cardiac output (esCCO), a non-invasive technique for continuously measuring cardiac output (CO), is based on modified pulse wave transit time, which is determined by pulse oximetry and electrocardiography. OBJECTIVE: We examined the ability of esCCO to detect stroke volume index (SVI) and changes in SVI compared with currently available arterial waveform analysis methods. METHODS: We retrospectively reanalysed 15 of the cases from our previous study on esCCO measurement. SVI was calculated using an esCCO system, measured using the arterial pressure-based CO (APCO) method, and compared with a corresponding intermittent bolus thermodilution CO (ICO) method. Percentage error measurement and statistical methods, including concordance analysis and polar plot analysis, were performed. RESULTS: The difference in the SVI values between esCCO and ICO was -3.0 ± 8.8 ml (percentage error, 33.5%). The mean angular bias was 0.8 and the radial limits of agreement were ± 27.3. The difference in the SVI values between APCO and ICO was 0.9 ± 11.2 ml (percentage error, 42.6%). The mean angular bias was -6.8 and the radial limits of agreement were ± 44.1. CONCLUSION: This study demonstrated that the accuracy, precision, and dynamic trend of esCCO are better than those of APCO.
