Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Tissue Engineering for Orthopaedic Applications
Guest editors: T. Clive Lee and Fergal J. O'Brien
Article type: Research Article
Authors: O'Brien, Fergal J.a; b; * | Harley, Brendan A.c; d | Waller, Mary A.b | Yannas, Ioannis V.c | Gibson, Lorna J.d | Prendergast, Patrick J.b
Affiliations: [a] Department of Anatomy, Royal College of Surgeons in Ireland, St Stephen's Green, Dublin, Ireland | [b] Trinity Centre for Bioengineering, Trinity College, Dublin, Ireland | [c] Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA | [d] Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA | Royal College of Surgeons in Ireland & Trinity College, Dublin, Ireland
Correspondence: [*] Address for correspondence: Dr. Fergal J. O'Brien, Department of Anatomy, Royal College of Surgeons in Ireland, St. Stephens Green, Dublin 2, Ireland. Tel.: +353 1 4022149; Fax: +353 1 4022355; E-mail: [email protected].
Abstract: The permeability of scaffolds and other three-dimensional constructs used for tissue engineering applications is important as it controls the diffusion of nutrients in and waste out of the scaffold as well as influencing the pressure fields within the construct. The objective of this study was to characterize the permeability/fluid mobility of collagen-GAG scaffolds as a function of pore size and compressive strain using both experimental and mathematical modeling techniques. Scaffolds containing four distinct mean pore sizes (151, 121, 110, 96 microns) were fabricated using a freeze-drying process. An experimental device was constructed to measure the permeability of the scaffold variants at different levels of compressive strain (0, 14, 29 and 40% while a low-density open-cell foam cellular solids model utilizing a tetrakaidecahedral unit cell was used to accurately model the permeability of each scaffold variant at all level of applied strain. The results of both the experimental and the mathematical analysis revealed that scaffold permeability increases with increasing pore size and decreases with increasing compressive strain. The excellent comparison between experimentally measured and predicted scaffold permeability suggests that cellular solids modelling techniques can be utilized to predict scaffold permeability under a variety of physiological loading conditions as well as to predict the permeability of future scaffolds with a wide variety of pore microstructures.
Keywords: Collagen, scaffold, tissue engineering, permeability, cell attachment
DOI: 10.3233/THC-2007-15102
Journal: Technology and Health Care, vol. 15, no. 1, pp. 3-17, 2007
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]