Affiliations: [a] Department of Petroleum Engineering, Yangtze University, Wuhan, Hubei, China | [b] Xinjiang Oilfield Engineering Institute, Karamay, Xinjiang, China
Abstract: Tensile stiffness of interfacial layered rock is the basis of studying the law of interlaminar propagation of hydraulic cracks. We used similar materials to make simulated specimens of sand-mud layered rock with prefabricated cracks, and used the digital image correlation (DIC) technique together with the three-point bending (TPB) test to obtain the strain field near the prefabricated crack tip in tensile state. Combined with the tensile stress in the corresponding area calculated by the load of the tester, the tensile stress-displacement curve at the interface of layered rock is obtained, and the tensile stiffness and interfacial fracture law at the interface of layered rock is calculated by the curve. The results show that in the process of tensile failure, before reaching its peak value, the interfacial tension stress of layered rock has a linear elastic deformation stage followed by a short hardening stage. Upon reaching the peak value, it is accompanied by interfacial failure and macro-cracks, and then the load decreases and enters the softening stage, which results in the complete destruction of the interface. The tensile stiffness values of layered rock with different sizes vary greatly, which indicates that the interfacial tensile stiffness values are sensitive to the specimen size and have a size effect. The results are of great significance to the study of the law of hydraulic fracture propagation in the interface of layered rock.