Affiliations: [a] National Institute for Materials Science, Tsukuba, Japan
| [b] Department of Nano Mechanics, Tohoku University, Sendai, Japan
| [c] IHI Corporation, Yokohama, Japan
| [d] Department of Urban Environmental Systems, Chiba University, Chiba, Japan
Correspondence:
[*]
Address for correspondence: M. Tabuchi, National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba 305-0047, Japan. Tel.: +81 29 859 2220; Fax: +81 29 859 2201; E-mail: [email protected].
Abstract: High Cr ferritic steels have been used in the 600°C class ultra-super critical (USC) thermal power plants. More than a decade has passed from the application of high Cr steels to USC power plants in Japan, and type-IV creep damages in the welded components become concerns. In the present paper, long-term creep tests for the welded joints of the high Cr steels (Gr.91 and Gr.122 steels) were conducted. Microstructures and creep damages in the heat affected zone (HAZ) were investigated using the thick plate specimens. Remaining life assessment methods of high Cr steel welds were discussed based on the experimental results. Further, to assist the standardization of the testing method for creep crack growth in welded joints, we have conducted the round robin tests using the high Cr steels (Gr.91 and Gr.92 steels) and their welds as part of the VAMAS TWA31 collaboration.
