Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Azizpour, Mostafaa | Ghaedi, Hamedb | Yengejeh, Reza Jalilzadehc; * | Saberi, Masoudb
Affiliations: [a] Department of Environment, Bushehr Branch, Islamic Azad University, Bushehr, Iran | [b] Department of Chemical Engineering, Bushehr Branch, Islamic Azad University, Bushehr, Iran | [c] Department of Environmental Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran
Correspondence: [*] Corresponding author: Reza Jalilzadeh Yengejeh (Associate professor) Department of Environmental Engineering, Ahvaz Branch, post code: 61349-37333: post office: 1915, Ahvaz, Iran. Tel.: +98 9124794322; E-mail: [email protected].
Abstract: Water pollution caused by antibiotics is one of the major challenges in the world today. The current research aims to investigate the effect of the Photo-Fenton process in removing indomethacin antibiotics from aqueous solutions. This experiment-based study was conducted on a laboratory scale and discontinuous manner. The influential variables affecting the removal efficiency of indomethacin include initial antibiotic concentration, pH, time, hydrogen peroxide concentration, and iron ion. The study was conducted base on standard methods (APHA, AWWA, CFWP, 2005). The Design Expert software was used to analyze the effect of independent variables on the removal efficiency of indomethacin antibiotics in the Photo-Fenton process (UV/H2O2/Fe2+) using response surface methodology (RSM) and central composite design (CCD). To ensure the repeatability of the results, each experiment was repeated three times and the reported the average. The results showed that the optimal removal conditions for indomethacin antibiotics were pH = 4, H2O2 oxidant concentration = 50 ppm, Fe2+catalyst concentration = 50 ppm, time = 75 minutes, and initial antibiotic concentration = 20 ppm, with a removal efficiency of 91.03%. The variables of initial antibiotic concentration, H2O2 concentration, and pH had the greatest impact on the removal efficiency of indomethacin. The results of this study indicate that under optimal conditions, more than 90% of indomethacin antibiotics can be removed from aqueous solutions using the Photo-Fenton process, which is a significant result for removing this pharmaceutical pollutant from aquatic environments.
Keywords: Pollution, advanced oxidation, antibiotic, idomethacin, water
DOI: 10.3233/MGC-230121
Journal: Main Group Chemistry, vol. 23, no. 2, pp. 219-235, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]