Affiliations: College of Mechanical and Electrical Engineering, Guangdong University of Science & Technology, Dongguan, China
Correspondence:
[*]
Corresponding author. Rong Chen, College of Mechanical and Electrical Engineering, Guangdong University of Science & Technology, Dongguan 523083, China. E-mail: [email protected].
Abstract: With the continuous development of manufacturing industry, the application range of NC machining technology has been further expanded. The contour accuracy is strongly related to the NC machining quality as a key machine tool performance indicator. Its application efficiency is plainly low as the majority of offline compensation-based contour accuracy adjustments rely heavily on manual experience. Moreover, the isolated research on automatic error compensation and its combination with algorithms does not start with the characteristics of contour accuracy in data processing. Therefore, based on the advantages of strong the robustness of the fuzzy algorithm and the high effectiveness of parameter adjustment, an automatic compensation method for NC machining contour error based on fuzzy control is proposed. The contour error prediction model is designed according to the machining path, and then the automatic compensation strategy for contour error under fuzzy control is designed based on the feed speed. The results showed that under this method, the contour error can reach a maximum of 0.06 and a minimum of 0.025, which was 0.015 lower than the minimum contour error of genetic algorithm. This indicated that the method greatly reduced the CNC machining contour error and improved the contour accuracy, as well as reducing the time cost of contour error compensation, improving the efficiency of contour error compensation, and realizing the automation of error compensation control capability. This is helpful for advancing CNC machining automation technology and supporting the intelligent development of machinery manufacturing.
