Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Affiliations: Mechatronics Engineering Department, Faculty of Mechanical Engineering, Yildiz Technical University, Besiktas, Istanbul, Turkey
Correspondence: [*] Corresponding author. Cenk Ulu, Mechatronics Engineering Department, Faculty of Mechanical Engineering, Yildiz Technical University, Besiktas, TR-34349, Istanbul, Turkey. Tel: +90 212 3832970; Fax: +90 212 3832975; E-mail: [email protected].
Abstract: Almost all exact inversion methods provide inverse solutions for only one input variable of fuzzy systems. These methods have certain limitations on the fuzzy system structure such as monotonic rule bases, singleton rule consequents, and invertibility check. These requirements limit the modeling capabilities of the fuzzy systems and also may result in poor application performances. In this study, an exact analytical inversion method is presented for multi-input-single-output decomposable TS fuzzy systems with either singleton or linear consequents. In the proposed method, fuzzy system structures do not need to have monotonic rule bases, singleton rule consequents, or any invertibility conditions. Thus, more flexible fuzzy systems can be used in inverse model based applications. The proposed method provides a simple and systematic way to obtain unique inverse solutions of all input variables simultaneously with respect to any desired system output value. For this purpose, an inversion trajectory approach that guarantees the existence and uniqueness of the inverse solutions is introduced. The inversion trajectory consists of a set of paths defined on the specific edges of universe of discourses of the decomposed fuzzy subsystems. Using this approach, the inverse definition of the overall fuzzy system can easily be derived only by inverting the related decomposed fuzzy subsystems on this inversion trajectory and then combining their inverse definitions. In this way, the inverse definition of the overall fuzzy system is obtained as consisting of analytical solutions of linear and quadratic equations for singleton and linear consequent cases, respectively. Simulation studies are given for the inversion of two and three-input-single-output fuzzy systems, and the exactness and effectiveness of the proposed method are demonstrated.
Keywords: Fuzzy systems, decomposability, inversion, multivariable systems, Takagi-Sugeno fuzzy systems
DOI: 10.3233/JIFS-220329
Journal: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 5, pp. 6343-6356, 2022
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]