Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Rahmani, Mehran; * | Rahman, Mohammad Habibur
Affiliations: Department of Mechanical Engineering, University of Wisconsin-Milwaukee, WI, USA
Correspondence: [*] Corresponding author. Mehran Rahmani, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, WI, USA. E-mail: [email protected].
Abstract: This paper considers a new fuzzy sliding mode control (NFSMC) of a 7 Degree of Freedoms (7-DoF) upper-limb exoskeleton robot. The proposed exoskeleton robot has a complex structure, an appropriate control method should be chosen for this robotics system. Therefore, a new sliding mode controller (NSMC) is applied for controlling of this robot conveniently. For this task, a novel sliding surface is selected, which is robust against external disturbances and unknown dynamics such as friction forces, different upper-limb’s mass, backlash, and input saturation. In order to improve the control method, fuzzy control is applied. Simulation results clearly validates that the proposed control method has some advantages such as high trajectory tracking, robustness, and zero tracking error.
Keywords: Exoskeleton robot, sliding mode control, fuzzy control, robustness
DOI: 10.3233/JIFS-181558
Journal: Journal of Intelligent & Fuzzy Systems, vol. 36, no. 3, pp. 2581-2592, 2019
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
[email protected]
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office [email protected]
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
[email protected]
For editorial issues, like the status of your submitted paper or proposals, write to [email protected]
如果您在出版方面需要帮助或有任何建, 件至: [email protected]